|
| 1 | Providing, fixing, testing and commissioning of MS air cushion tank 8 mm thick MS plate, 450 mm in diameter and 2 m in height with air release valve on top and flanged connection to riser duly welded with 300mm dia pipe to be installed at pump house with air release vavle MS angle tripode with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required Make:- SANT/ Safeguard/ IVC/Zoloto/ Leader. |
| 2 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250 mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required Make:- SANT/ Safeguard/ IVC/Zoloto/ Leader. |
| 3 | Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/ 3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required Make:- Jindal (Hissa)/ TATA/ SAIL. |
| 4 | 25 mm |
| 5 | 50 mm |
| 6 | 80 mm |
| 7 | 100 mm |
| 8 | 150 mm |
| 9 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.(a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585.(b) 20 mm nominal internal dia gun metal globe valve & nozzle(c) Drum and brackets for fixing the equipmets on wall.(d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30m Make:- Minimax/ Newage/ Tyco/ Safex/ Ceasefire. |
| 10 | Supply, installation, testing & commissioning of : Gun metal / S.S ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A') Make:- Minimax/ Newage/ Tyco/ Safex/ Ceasefire. |
| 11 | Providing, fixing of 63 mm dia, 15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Gunmetal / S.S male & female instantaneous type coupling (IS 903) Make:- Minimax/ Newage/ Tyco/ Safex/ Ceasefire. |
| 12 | Providing & fixing 63 mm dia Gun metal / S.S Branch pipe with Gun metal with 20 mm (nominal internal dia) Size Gun metal Nozzle/S.S with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903 Make:- Minimax/ Newage/ Tyco/ Safex/ Ceasefire. |
| 13 | Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30\\" x 24\\" x 10\\") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words\\" Hose Cabinet\\" on the Box complete as requried Make:- Minimax/ Newage/ Tyco/ Safex/ Ceasefire. |
| 14 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required Make:- Minimax/ Newage/ Tyco/ Safex/ Ceasefire. |
| 15 | 4 Way |
| 16 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required Make:- Sant/ Zoloto/ Leader. |
| 17 | 150 mm Dia. |
| 18 | 200 mm Dia |
| 19 | 300 mm Dia (Gear Operated) |
| 20 | Providing, installation, Testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts,nuts, washers etc.as required Make:- Sant/ Zoloto/ Leader. |
| 21 | 80 mm dia. |
| 22 | 150 mm Dia. |
| 23 | Providing, fixing, testing & commissioning of 15mm dia quartzoid pendent bulb type sprinklers of rating 68 degree centigrade with required accessories complete as per specification as required Make:- Sant/ Zoloto/ Leader. |
| 24 | Providing & fixing in the false ceilings, high pressure metallic hose with fittings (25 NB at one end for connection to pipe and 15 NB at the other end for the Sprinkler) for connecting the Sprinklers to Sprinkler piping system, Hose & Fittings and installed in accordance with Test Pressure 10.0 Kg/Sq.m as required Make:- Minimax/ Newage/ Tyco/ Safex/ Ceasefire. |
| 25 | Length upto 1000 mm |
| 26 | Supply, Installing, testing and commissioning of 25mm dia gate/ball valve with all accessories as required Make:- Sant/ Zoloto/ Leader. |
| 27 | Supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried Make:-H.Guru, System Sensor, Fbig, Waree, Emerald. |
| 28 | Supplying installation,testing and commissioning of electric driven main fire pump DB 80/26 suitable for automatic operation and consisting of following complete in all respect as required.Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 2280 LPM and 70 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% oftherated head.) Suitable 75 HP SQ cage induction motor,TEFC, synchronous speed 2900 RPM suitable for operation on 415 volts, 3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class \\"F\\"insulation ,conforming to IS-325.M.S fabricated common base plate,coupling ,coupling guard, foundation bolts etc.as required.(D) Suitable RCC pump-Foundations as per manufactures design and 4 No. Dunlop (cushy foot) heavy duty Antivibration mounting pads. Make Kirloskar/ Crompton/ Mather/ Platt/ Siemens. |
| 29 | Supply Insllation,testing,and commissioning Jockey pump with 15 HP SQ cage induction motor, TEFC, synchronous speed 2900 RPM,suitable for opreation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class \\"F\\"insulation,conforming to IS-325 for 180 LPM and 70 Metres head conforming to IS 1520 bronze impeller/SS and Mechanical seal.MS fabricated common base plate, coupling,coupling guard,CC foundation etcas requried. Make Kirloskar/ Crompton/ Mather/ Platt/ Siemens. |
| 30 | Fabricating ,Supplying, installation, testing and commissioning of cubical construction floor mounted type, fabricating from 2 mm thick CRCA sheet compartmentalised withhinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having swichgear and accessories mounting and internal wiring, earth terminal numbering etc complete in all respect suitable for operation on 415 V .Three Phase, 50 Hz, Ac supply withencloser protection class IP 42 as required. MAKE:-Schneider/ Lauritz / Knudson (L&T) / Siemens/ Legrand/ ABB. |
| 31 | Incomer |
| 32 | 400 A, 4 pole, 50 KA, MCCB withmicriprossor release with Ics=Icu digital Volt meter(0-500 Volts) with selector switch digital Ammeter (0-400 Amps) with in built selector switch and CT's etc. Set of 3 phase LED indicating lamps, set of Al. bus bar for 500 Amps |
| 33 | Mains Fire pump. |
| 34 | 200 Amps, 4p MCCB, 35/36 KA Ics=100% Icu with suitable HP fully automatic star/delta starter with over load protection, current sebsing type single phase preventor complete with all accessories and internalwiring requried for automatic operation, selector switgh for/ remoute, auto /mannul oFF operation-2sets |
| 35 | Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set |
| 36 | Pump on LED Induication Lamp -1 No |
| 37 | Jockey pump. |
| 38 | 63 Amps. 4P MCCB 25 KA Ics=100% wit hSuitable HP fully automatic star/delta starter with over load protection .(without no volt and under voltage trip), current sebsing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/ remote, auto/ manual OFF operation-2 set |
| 39 | Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set |
| 40 | Pump on LED Induication Lamp -1 No |
| 41 | Diesel Engine Control |
| 42 | Control for Diesel Engine Comprising Auto/ Manaul selector switch and 3 attempt starting device, timers and relays as requried . Push buttions.start/ stop in manual mode. Indication Lamp for High/Low Lub. Oil pressure, High Water Temp, and Engine ON indication. Battery Charger suitable for 12/24 V DC with boost and tickle selector switch, 0-30 V DC volt meter, 0-20 A DC Ammeter. All standard relay and accessories for automatic operation. |
| 43 | System Controller |
| 44 | Designing supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Pump, Diesel Pump, Pressurisation Pump, in Sequence as per specification consisting of relay, timers, sensors, annunciation window for fault indication, complete as per specification |
| 45 | Providing & fixing of IS marked (IS:15683) 4.50 kg portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. (ISI MARKED) Make:- Minimax, Ceasefire, Padmini, Safex. |
| 46 | Providing and fixing Water CO2 9 .Litrs type fire extinguishers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. ( ISI MARKED) Make:- Minimax, Ceasefire, Padmini, Safex. |
| 47 | Providing & Fixing 4 Kg. ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.(ISI MARKED) Make:- Minimax, Ceasefire, Padmini, Safex. |
| 48 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size. Make:- Havells/ finolex/ RR Cable/ KEI/ Grandly. |
| 49 | Armoured cable 35 sq. mm ( 3.5 core) |
| 50 | Armoured cable 95 sq. mm ( 3.5 core) |
| 51 | Supplying, Installation, Testing and Commissioning of Single S.S suction collecting head, hose coupling (drawout connection) with female outlet complete without 100mm dia. MS Suction pipe (with puddle flange) with a foot valve complete as required Make:- Sant/ Zoloto/ Leader. |
| 52 | Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size, drilling welding including cost of fasteners, clamp in RCC structural members as directed, including two or more coats of synthetic enamel paint over one coat of primer after surface preperation including cutting and making good walls .Make:- Jindal (Hissa)/TATA. |
| 53 | Providing and fixing Cast Cast Iron/steel double flanged horizontal type Y stainer with SS mesh PN 1.0 confirming to class - I, ISI including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications complete in all respect Make:- Sant/ Zoloto / L.P/ Leader. |
| 54 | 300 mm Dia |
| 55 | Supply, Installing, testing and commissioning of ball valve with all accessories as requried. MAKE:- CASTLE/ SANT/ Zoloto/ LP/ Leader. |
| 56 | 50 mm Dia |
| 57 | Supplying, Installation, Testing and Commissioning of Sprinkler installation valve with water gong, pressure gauge, drain valve etc as reqd 150 mm dia size etc. complete as required. MAKE:- Tyco/ HD/ MEC/ Newage. |
| 58 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. MAKE:- System Sensor/ Potter/ RC. |
| 59 | Providing, fixing, testing and commissioning 25mm diameter inspecting and testing assembly with gunmetal isolation valve gunmetal sight glass bypass 25dia valve and connected to 50mm drain line.(Make: Kartar/LP/Sant) |
| 60 | Core cutting hole work involving making holes in concrete and other structures using a diamond core cutter to create openings for pipes, ducts, wall etc. The purpose of the cutting (e.g., for laying pipes, structural reinforcement, or testing), materials to be cut (RCC slabs, walls), the maximum thickness of the material 25mm to 200mm, the inclusion of labor, scaffolding, and any necessary reinforcement, as well as the specifications for the core cutting machine and bits themselves including repairing etc. complete in all respect. |
| 61 | Providing and fixing for Bitumin sheets with Black Japan Paints having 4mm thick pipekot for he underground pipe complete in all respect. |
| 62 | Providing & fixing of Fire Buckets (4 nos.) with stand having capacity of 9 liters conforming to relevant BIS specifications MAKE:-Crown, Sales, Fire guard. Please Enable Macros to View BoQ information |
