|
| 1 | Dismantling floor hearth/ wall tiling including cement mortar bedding (but not backing) and removing tiles & rubbish off the premises complete all as specified and directed. |
| 2 | M&L for machine cut Kota stone slab flooring 20mmt to 25mm thick laid over and including 20mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 3 | M&L for Granite (of any type) 20mm thick laid over and including 15mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone slab including griding, rubbing and polishing including rounding to edges of slab if required complete all as specified and directed. |
| 4 | M&L for Granite (of any type) 20mm thick in skirting, dado, over and including 10mm thick rendering in cement mortar 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone slab including griding, rubbing and polishing including rounding to edges of slab if required complete all as specified and directed. |
| 5 | M&L for coloured Non skid ceramic tiles, 7 to 8mm thick (square or rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm, set and jointed 3mm spacer fill with grouting in neat cement slurry and pointed in white cement with pigment to match, as in floors laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 6 | M&L for applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer 'ARMOUR -CRETE' of structural water proofing pvt ltd by ratio 1:2 (one Armour Crete : Two cement) or 'POLYCRYL' of Green boro polychem pvt ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. Note:- This layer will be allowed to Air Cure for 4 hours and as directed |
| 7 | M&L for applying second layer of 1.5mm to 2.0mm thick slurry of cement at 0.242kg/sqm mixed with acrylic based polymer 'ARMOUR CRETE' of structural water proofing pvt ltd and silica sand by ratio 1:2:2 (Armour-crete : cement : silica sand) or 'POLYCRYL' of Green boro polychem pvt ltd and silica sand by ratio 1:2:2 (Polycryl : cement : silica sand) or ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. Note:- This layer will be allowed to Air Cure for 4 hours followed by water curing of 48 hours and as directed. |
| 8 | M&L for light coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed 3mm spacer fill with grouting in neat cement slurry and pointed in white or coloured cement to match as in floors laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L for Sadaralli stone (of any type) 20mm thick, over and including 15mm thick screed bed in cement mortar 1:6 and jointed 3mm spacer filled with grouting with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone slab including griding, rubbing and polishing including rounding to edges of slab if required complete all as specified and directed. |
| 10 | M&L for pre-cast cement concrete block masonry with solid blocks type C1, PCC 1:3:6 (using 20mm graded crushed stone aggregates) exc 10cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 11 | M&L for rendering 10mm thick on fair faces of Brick/Stone masonry in cement mortar 1:6 finished even and smooth wothout using extra cement complete all as specified and directed. |
| 12 | M&L for glazed ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7mm thick as in vertical surfaces, set and jointed, 3mm spacer filled with grouting in neat cement slurry and pointed in white or coloured cement to match laid over and including backing coat 10mm thick cement mortar 1:4 complete all as specified and directed. |
| 13 | Demolition of concrete in ground floors and pavings not exc 15 cm thickness(below or above ground level) complete all as specified and directed. |
| 14 | M&L for 40mm thick PCC type B1, 1:2:4 (using 20mm graded crushed stone aggregates) as in floor finishing surface of concrete topping even and fair (without using extra cement) complete all as specified and directed. |
| 15 | S&F in repairs wash basins, Vitreous China (flat back or angle back type) of size 550x400mm, excluding taps, waste chain and plug but including brackets etc complete including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 16 | S&F in repairs vitreous China wash hand basin, white in colour, (counter type oval shaped) of size 560mmX470mmX190mm including bottle trap 150mm including cutting of exsitng Granite top complete all as specified and directed. Make:- Cera, Cat Part No. S2030104 & F8060101 or equivalent make as specified in list of makes of Particular Specifications. |
| 17 | S&F in repairs vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 18 | S&F in repairs vitreous China half stall urinal white, of size 620 x 370 x 330 mm with grating and union for discharge pipe and fixing plug, bedding urinal against wall in CM 1:2 securing urinal/screws to plugs with and including 60mm long brass screw, pointing around urinal back in cement mortar complete all as specified and directed. |
| 19 | S&F in repairs vitreous China wash down water closet (pedestal pattern), white with P trap (excluding fluhing cistern and flush pipe) including all accessoreis i.e seat cover complete all as specified and directed. |
| 20 | S&F in repairs vitreous China squatting pan Orissa pattern of size 630 x 450 mm white with integral foot rest (excluding flushing cistern and flush pipe) including lime concrete bedding all round and finished just below level of rim of pan to receive the floor complete all as specified and directed. |
| 21 | S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet,ball valve, float and handle including necessary brackets & screws as required complete all as specified and directed. |
| 22 | S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce complete all as specified and directed. |
| 23 | S&F in repairs low level flushing cistern installation kits including siphon, float valve, handle, rubber washer and all necessary fittings complete all as specifed and directed. |
| 24 | S&F in repairs 15mm bore chromium plated pillar taps, cast copper alloy, with fancy type, with capstan heads,screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe/CPVC/UPVC pipe and fixed complete all as specified and directed. |
| 25 | S&F in repairs 15mm bore chromium plated long body/Swan neck pillar taps cast copper alloy ,fancy type, with capstan heads,screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe/CPVC/UPVC pipe and fixed complete all as specified and directed. |
| 26 | S&F in repairs 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 27 | S&F in repairs 15 mm dia Stop valve cast copper alloy, fancy type CP with long shank and cup (Concealed type) screwed both ends for iron pipe/CPVC/UPVC pipe or for unions and fixed completed all as specified and directed. |
| 28 | S&F in repairs 15 mm dia chromium plated cast copper alloy bip tap screwed down, screwed for iron/CPVC/UPVC pipes and fixed complete all as specified and directed. |
| 29 | S&F in repairs two way chromium plated cast copper alloy bib cock with wall flange screwed for iron pipe/CPVC/UPVC or for brass ferrule and fixed complete all as specified and directed. |
| 30 | S&F in repairs 15mm bore chromium plated cast copper alloy angular stop cock, fancy type, with capstan heads,screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe/CPVC/UPVC pipe and fixed complete all as specified and directed. |
| 31 | S&F in repairs toilet paper holder with flat recessed type stainless steel fixed with chromium plated cast copper alloy screw complete all as specified and directed. |
| 32 | S&F in repairs health faucet (ABS Body) mild steel chromium plated cast copper alloy suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 33 | S&F in repairs brass chromium plated cast copper alloy shower rose 125mm size with shower arm fixing with 15mm bore pipe. complete all as specified and directed. |
| 34 | S&F in repairs Soap dish vitreous China white, approximate size 160x 160x90mm any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 35 | S&F 20mm dia, D type, 60cm long between flanges brass chromium plated tubular towel rail including all necessary fittings complete all as specified and directed. |
| 36 | S&F waste coupling 32mm size full thread wth 80mm height for wash hand basin complete all as specified and directed. |
| 37 | S&F in repairs waste coupling PTMT of 40 mm bore for wash hand basin/Kitchen sink complete all as specified and directed. |
| 38 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 39 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 40 | S&F in repairs mirror 5mm thick bevelled edge mirror of selected quality glass, mounted on 12mm thick PVC Board fixed to PVC sleeves with chromimum platesd brass screws and cup washer over screw head complete in all respect as specified & directed. |
| 41 | S&F in repairs 15mm bore push tap any colour high pressure of PTMT screwed for iron pipe and fixed, complete all as specified and directed. |
| 42 | S&F in repairs 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight 15mm-90gms/20mm 125gms). |
| 43 | S&F in repairs 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-110gms) |
| 44 | S&F in repairs 15mm dia bore stop valve of PTMT any colour high pressure screwed for iron pipe (minimum weight 90gms) complete all as specified and directed. |
| 45 | S&F in repairs swivel shower of PTMT with arm any colour for fixing with 15 mm pipe. (minimum weight 40 gms) complete all as specified and directed. |
| 46 | S&F in repairs 450mm long and 15mm bore PVC connections fixed with PTMT nuts complete all as specified and directed. |
| 47 | S&F in repairs PTMT grating doom 125 mm dia with waste hole. (Minimum weight 40gms) complete all as specified and directed. |
| 48 | S&F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe.(Minimum weight 60gms) complete all as specified and directed. |
| 49 | S&F in repairs PTMT Grating doom 100 mm dia with waste holes complete all as specified and directed. |
| 50 | S&F in repairs high density polythelene Flexible waste pipe, 32 mm dia, suitable for wash hand basin complete all as specified and directed |
| 51 | S&F in repairs high density polythelene Flexible waste pipe, 40 mm dia, suitable for kitchen sink complete all as specified and directed |
| 52 | S&F in repairs 50 mm dia PVC SWR pipe suitable for urinal waste pipe, and connecting spout to ground floor etc. including bend,elbow and Tee and necessary clamping to wall or floor complete all as specified and directed (Note : This includes work at Third & Fourth Floor) |
| 53 | S&F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall with necessary clamping complete all as specified and directed. (Note : This includes work at Third & Fourth Floor) |
| 54 | S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall with necessary clamping where required (Note : This includes work at Third & Fourth Floor) |
| 55 | S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 56 | S&F in repairs PVC (SWR) bends for 75 mm bore pipe with access door complete all as specified (Note : This includes work at Third & Fourth Floor) |
| 57 | S&F in repairs PVC (SWR) bends for 110 mm bore pipe with access door complete all as specified and directed. (Note : This includes work at Third & Fourth Floor) |
| 58 | Taking up or down 15mm bore UPVC/steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 59 | S&F 15mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc, complete all as specified (Note : This includes work at Third & Fourth Floor) |
| 60 | Taking up or down 20 mm bore GI/PPR/PVC tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches all as specified and directed |
| 61 | S&F 20mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc, complete all as specified (Note : This includes work at Third & Fourth Floor) |
| 62 | Taking up or down 25 to 32mm bore GI/PPR/PVC tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches all as specified and directed |
| 63 | S&F 25mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc, complete all as specified (Note : This includes work at Third & Fourth Floor) |
| 64 | Taking up or down 40 to 50mm bore GI/PPR/PVC tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches all as specified and directed |
| 65 | S&F 40mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc, complete all as specified (Note : This includes work at Third & Fourth Floor) |
| 66 | S&F in repairs 15mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe /CPVC/UPVC pipe complete all as specified and directed. |
| 67 | S&F in repairs 25mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe/CPVC/UPVC complete all as specified and directed. |
| 68 | S&F in repairs 50mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe/CPVC/UPVC complete all as specified and directed. |
| 69 | M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of tanks exc 250 but not exc 500 ltrs capacity including mentioning of date of cleaning of tank complete all as specified and directed. |
| 70 | M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of tanks exc 500 but not exc 1000 ltrs capacity including mentioning of date of cleaning of tank complete all as specified and directed. |
| 71 | M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of tanks exc 1000 but not exc 2000 ltrs capacity including mentioning of date of cleaning of tank complete all as specified and directed. |
| 72 | M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of tanks exc 2000 but not exc 3000 ltrs capacity including mentioning of date of cleaning of tank complete all as specified and directed. |
| 73 | S&F in repairs 500 ltrs rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height including dismantling old tank complete all as specified and directed. |
| 74 | S&F in repairs 1000 ltrs rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height including dismantling old tank complete all as specified and directed. |
| 75 | S&F in repairs 2000 ltrs rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height including dismantling old tank complete all as specified and directed. |
| 76 | S&F in repairs 3000 ltrs rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height including dismantling old tank complete all as specified and directed. |
| 77 | S&F in repairs PVC lid Cover threaded with universal ring thread male female type fixed with nut and bolt to PVC tank of capacity 500 ltr upto 3000 litres complete all as specified and directed. |
| 78 | S&F in repairs 20 mm dia bore ball valve (minimum weight 210 gms) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including reducer socket or plaine socket of suitable size all as specified and directed. |
| 79 | S&F in repairs 25 mm dia bore ball valve (minimum weight 455 gms) high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including reducer socket or plaine socket of suitable size all as specified and directed. |
| 80 | S&F in repairs 20-25mm thk Cudappah stone as in urinal partition of size 500x750 mm terminating about 40cm above floor line, rounding the edges of stone slab including including removing existing broken partition portion or cutting groove in wall and making good the disturbed surface complete all as specified and directed. |
| 81 | S&F corner shelves unbreakable transparent ABS Acrylic wall mounted shelf minimum radius 250mm fixed with SS Screws complete all as specified and directed |
| 82 | S&F wall mounted liquid soap dispenser minimum 400ml capacity ABS body complete all as specified and directed |
| 83 | S&F ACP Cladding in wall / faces of cloumn / False ceiling including necessary frame work cleate grout and etc complete all as specified and directed |
| 84 | S&F in repairs aluminium windows and ventiators shutters/ Al louverd Strip powder coated (minimum thikness of powder coating 50 micron), side/top hung type without sash bars, aluminium sections of not less than 60mm width and 1.5 mm thick including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, screws, anodised aluminum fittings such as peg stays 150mm long ( 1 No per window), hinges 75mm long (2/3 Nos) , suitable handle (1 No.) complete all as specified and directed |
| 85 | S&F in repairs figured glass, pin head type 4 mm thick, not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed |
| 86 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws or aluminium beading all as specified |
| 87 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 88 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed |
| 89 | S&F 100 mm long aluminium anodised handle cast type complete all as specified and directed |
| 90 | S&F 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed |
| 91 | S&F 100 mm long butt hinges medium weight cold rolled fixed to door frame complete all as specified and directed |
| 92 | S&F in repairs for 250 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and directed Please Enable Macros to View BoQ information |
