|
| 1 | Taking down cement plaster including racking out joint hacking for key scrubbing down with water etc., complete all as specified and directed. |
| 2 | M&L for rendering 10 mm thick cement plaster in CM 1:6 for wall finished even & smooth complete all as specified and directed. |
| 3 | M&L for rendering 15 mm thick cement plaster in CM 1:4 as in external wall & sunken floor finished even & smooth without using extra cement mixed with water prooffing compound complete all all as specified and directed. Note:-Water proofing compound shall be measured and paid separately as \\"Supply only\\" under respective item |
| 4 | Supply only liquid water proofing compound complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed. |
| 7 | M&L for applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer 'ARMOUR -CRETE' of structural water proofing Pvt Ltd by ratio 1:2 (one Armour Crete : Two cement) or 'POLYCRYL' of Green boro polychem Pvt Ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions complete all as specified and directed.Note:- This layer will be allowed to Air Cure for 4 hours |
| 8 | M&L for applying second layer of 1.5mm to 2.0mm thick slurry of cement at 0.242kg/sqm mixed with acrylic based polymer 'ARMOUR CRETE' of structural water proofing pvt ltd and silica sand by ratio 1:2:2 (Armour-crete : cement : silica sand) or 'POLYCRYL' of Green boro polychem pvt ltd and silica sand by ratio 1:2:2 (Polycryl : cement : silica sand) or ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturer's instructions complete all as specified and directed.Note:-This layer will be allowed to Air Cure for 4 hours followed by water curing of 48 hours |
| 9 | M&L for 40mm thick plain cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in roof padding complete all as specified and directed. |
| 10 | M&L for 10mm thick rendering in CM(1:3) mixed with water proofing compound as per manufacturer instruction on concrete surface and making the surface even and smooth without using extra cement as in required slope for draining out the rain water complete all as specified and directed.Note:-Water proofing compound shall be measured and paid separately as supply only |
| 11 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg/Sqm & subsequent coate of 0.30 Kg/Sqm without leaving the pores/voids in the surface over primed or APP Membrane Surface including cleaning surfaces and taking down exiting water proofing treatement complete all as specified and directed. |
| 12 | M&L for providing and laying APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) forced application with the fdirew torch complete all as specified & directed |
| 13 | M&L for preparation of bituminous surfaces of any descriptionand appling two coats of Aluminium paint complete all as specified and directed. |
| 14 | M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in lean concrete in sunken portion complete all as specified and directed. |
| 15 | M&L for 25mm thick plain cement concrete 1:2:4, type B0 (using 12.5mm graded crushed stone aggregates) as in levelling course to receive top finish layer complete all as specified and directed. |
| 16 | Demolition of brickwork or precast concrete block walling,built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed. |
| 17 | M&L for pre-cast cement concrete block masonry in 1:3:6, type C1 (using 20mm graded crushed stone aggregates) solid blocks exc 10cm in width having minimum compressive strength of 50 Kg/sqcm as per IS 2185 (Part I) 2005 and set in cement mortar 1:6 complete all as specified and directed. |
| 18 | M&L for pre-cast cement concrete block masonry in 1:3:6, type C1 (using 20mm graded crushed stone aggregates) solid blocks not exc 10cm in width having minimum compressive strength of 50 Kg/Sqcm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4complete all as specified and directed. |
| 19 | Dismantling floor hearth, wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 20 | M&L for coloured non skid ceramic tiles, 7 to 8mm thick (square or rectangular), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles, as in floors laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 21 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over and including 15mm thick CM(1:6) complete all as specified and directed. |
| 22 | M&L for coloured glazed ceramic tiles of size 450 x 300 x 7mm / 600 x 300 x7 to 8mm thick as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick backing with CM(1:4) complete all as specified and directed. |
| 23 | Taking up or down 25 mm bore steel/PVC tubing and connections, including cleaning for refixing or removal to store and connection complete all as specified and directed. |
| 24 | Taking up or down 20 mm bore steel/PVC tubing and connections, including cleaning for refixing or removal to store and connection complete all as specified and directed. |
| 25 | Taking up or down 15 mm bore steel/PVC tubing and connections, including cleaning for refixing or removal to store and connection complete all as specified and directed. |
| 26 | M&L for cutting chases on stone walls/concrete , pinning in, making good to facings where required and pointing in cement mortar 1:3 to cutting chases for concealed water tubing exc 20 mm girth and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed. |
| 27 | S&F 15mm dia Unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc dia complete all as specified and directed. |
| 28 | S&F 20mm dia Unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc complete all as specified and directed. |
| 29 | S&F 25mm dia Unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc complete all as specified and directed. |
| 30 | S&F in repairs vitreous China wash down water closet pan pedestal pattern white (excluding flushing cistern) including seat cover and dismantling of old unserviceable items complete all as specified and directed. |
| 31 | S&F in repairs vitreous China wash basin white flat back size 550X400mm including, waste coupling , pipe and cutting for and pinning in ends of brackets or erecting stand brackets complete all as specified and directed. |
| 32 | S&F in repairs vitreous China bowl urinal flat back of size 430 x 370 x 340 mm with grating and union for discharge pipe and fixing plug, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement mortar complete all as specified and directed. |
| 33 | S&F in repairs vitreous China squatting pan Orissa pattern of size 580 x 440 mm white with integral foot rest (excluding flushing cistern) incl taking down old water closet and provn of lime concrete bedding complete all as specified and directed. |
| 34 | S&F in repairs PVC valve less syphonic action type low level flushing cistern 10 Ltr capacity including flange valve handle, Bracket, PVC flush down pipe length upto 1.3 m hight dia as required with bend including taking down old unserviceable cistern complete all as specified and directed. |
| 35 | S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce complete all as specified and directed. |
| 36 | S&F in repairs 32mm dia flush pipe of polythene of low or high density or PVC for low level flushing cistern complete all as specified and as directed. |
| 37 | S&F in repairs 40mm bore High density polyethylene pipes (HDPE) of pressure rating 6 Kgf/Sqcm fixed complete to walls, ceilings or in floors including Bend,T & Y complete all as specified and as directed.. |
| 38 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 39 | S&F in repairs 15mm dia chromium plated pillar taps,fancy type, with capstan heads,screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe/CPVC/UPVC pipe and fixed complete all as specified and directed. |
| 40 | S&F two way chromium plated cast copper alloy bib cock with wall flange screwed for iron pipe/CPVC/UPVC or for brass ferrule complete all as specified and directed. |
| 41 | S&F in repairs 15mm bib taps fancy type chromium plated cast copper alloy round handle, screwed down, screwed for iron pipe/CPVC/UPVC and fixed complete all as specified and directed. |
| 42 | S&F in repairs 15mm stop valves fancy type, chromium plated, cast copper alloy screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 43 | S&F in repairs shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed. |
| 44 | S&F in repairs 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe/CPVC/UPVC and fixed complete all as specified and directed (Minimum weight 15mm-90gms/20mm125gms) |
| 45 | S&F in repairs 15 mm bore swivel shower of PTMT (Minimum weight 40gms) any colour complete all as specified and directed. |
| 46 | S&F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in floor with necessary clamping complete all as specified and directed. |
| 47 | S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in floor with necessary clamping where required complete all as specified and directed. |
| 48 | S&F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall with necessary mild steel clamping complete all as specified and directed. |
| 49 | S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall with necessary mild steel clamping complete all as specified and directed. |
| 50 | S&F in repairs PVC (SWR) bends for 75 mm bore pipe with access door complete all as specified and directed. |
| 51 | S&F in repairs PVC (SWR) bends for 110 mm bore pipe with access door complete all as specified and directed. |
| 52 | S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 53 | S&F in repairs PVC SWR 75 mm dia branch pipe, singe (Single Y) equal or unequal provided with access door complete all as specified and directed. |
| 54 | S&F in repairs PVC bends for 75 mm bore pipe complete all as specified and directed. |
| 55 | S&F in repairs PVC SWR 110 mm dia branch pipe, Double (double Y) equal or unequal provided with access door complete all as specified and directed. |
| 56 | S&F in repairs PVC bends for 110 mm bore pipe complete all as specified and directed. |
| 57 | S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 58 | S&F in repairs grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. |
| 59 | M&L for preparation of old treated surfaces and applying two coats of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shed (company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm on walls, pillasters, cornices, drops, chajjas etc., complete all as specified and as directed. |
| 60 | M&L for preperation newly plastered surfaces and applying two coats of Acrylic distemper over a coat of primer on walls, pillasters, cornices, etc., including applying 3mm thk wall care putty complete all as specified and directed. |
| 61 | M&L for preparation of old painted ceiling surfaces and applying one coat of Acrylic distemper complete all as specified and directed. |
| 62 | M&L for preparation of old painted wall surfaces and applying one coat of Acrylic distemper complete all as specified and directed. |
| 63 | S&F 0.56 mm thick aluminium sheeting in crumple portion complete all as specified and directed. |
| 64 | Taking down chowkats or frames not exc 1.5 sqm each (without taking of shutters from the frame) complete all as specified and directed. |
| 65 | Taking down and removing shutters of any description exc 1 Sqm but not exc 2 sqm complete all as specified and directed. |
| 66 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm / 50x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 67 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws or welding to steel frame complete all as specified and directed. |
| 68 | S&F 150 mm long aluminium anodised handle cast type complete all as specified and directed. |
| 69 | S&F 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 70 | S&F 100 mm long butt hinges medium weight cold rolled fixed to door frame complete all as specified and directed. |
| 71 | Taking down and refixing shutters of any description (wooden, aluminium, mild steel) in same opening of any description exc 1 Sqm but not exceeding 2 sqm, including easing, adjusting refixing builders hardware, renewal of unserviceable screws, hinges etc and necessary welding complete all as specified and directed. |
| 72 | M&L for de-watering, removing all moses, algae and dirt from internal walls, floors & mouths of pipes of RCC/PVC overhead tanks (Service tanks) of tank capacity upto 500 Litres by cleaning with high pressure industrial vaccume cleaner including removing of dirty water completely using sludge pump set and disposing off the same to a safe distance and applying of anti bacterial sterilization spray to internal surfaces using Zero bacterial compound (Aqua-treat 8888) or equivalent approved chemical and writing the date of cleaning on outside of tank using synthetic enamel paint of white colour over black background with letters of size 50mm height x 50mm breadth complete all as specified and directed |
| 73 | M&L for de-watering, removing all moses, algae and dirt from internal walls, floors & mouths of pipes of RCC/PVC overhead tanks (Service tanks) of tank capacity exceeding 500ltrs upto 1000 Litres by cleaning with high pressure industrial vaccume cleaner including removing of dirty water completely using sludge pump set and disposing off the same to a safe distance and applying of anti bacterial sterilization spray to internal surfaces using Zero bacterial compound (Aqua-treat 8888) or equivalent approved chemical and writing the date of cleaning on outside of tank using synthetic enamel paint of white colour over black background with letters of size 50mm height x 50mm breadth complete all as specified and directed |
| 74 | M&L for de-watering, removing all moses, algae and dirt from internal walls, floors & mouths of pipes of RCC/PVC overhead tanks (Service tanks) of tank capacity exceeding 1000ltrs upto 2000 Litres by cleaning with high pressure industrial vaccume cleaner including removing of dirty water completely using sludge pump set and disposing off the same to a safe distance and applying of anti bacterial sterilization spray to internal surfaces using Zero bacterial compound (Aqua-treat 8888) or equivalent approved chemical and writing the date of cleaning on outside of tank using synthetic enamel paint of white colour over black background with letters of size 50mm height x 50mm breadth complete all as specified and directed |
| 75 | S&F in replacement 500 ltrs rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height complete all as specified and directed. |
| 76 | S&F in repairs 1000 ltrs rotational moulded poly- ethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height complete all as specified and directed. |
| 77 | S&F in repairs 15mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe /CPVC/UPVC pipe complete all as specified and directed. |
| 78 | S&F in repairs 20mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe/CPVC/UPVC complete all as specified and directed. |
| 79 | S&F 5.5 mm thick bevelled edge mirror of selected quality glass ,mounted on 12 mm thick PVC board fixed to PVC Sleeves with chromimum plated brass screws and cup washers over screw head complete in all respect as specified & directed. Please Enable Macros to View BoQ information |
