Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | DISMANTLING WORK |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 3 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : area beyond 3 sq. metres |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 6 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 7 | Dismantling uPVC. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 8 | 75 to 80 mm dia pipe internal |
| 9 | 100 mm dia pipe |
| 10 | 150 mm dia pipe |
| 11 | BRICK WORK |
| 12 | Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9\\"x4.5\\"x3\\") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 13 | Providing designation 112 mm thick reinforced designation 100 A brick work vuith fly ash lirne brick (FLAG)confirming to lS 12894-1990 (9\\"x4'5\\"x3\\" ) in C.M. ( 1 . 4 ) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials,n caffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specificationand direction of E/|. |
| 14 | Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonary |
| 15 | WOOD WORK |
| 16 | Supplying, fitting and fixing good quality, well dressed and well seasoned teak wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. |
| 17 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 18 | Supplying fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutter door and windows with black board core blended with high quality phenol formal clehydes synihetic resin both side commercial veneered of standard make with Aluminium fittings :such as hinges, tower bolts, hendle, cleats and sand blocks and laxes all conrplete as pe building specrfication and direction of E/l. |
| 19 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.9.127.2 1.0 mm thick |
| 20 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :50x12 mm |
| 21 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 22 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, exluding providing and fixing top & bottom pivot & spring type fixing arrangement and including making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 23 | dormakaba floor spring BTS 75V EN 1-4 with std. spindle and cover plate. The floor spring with backcheck and adjustable closing speed from 175°. Non-hold open. As per EN 1154 and CE marked. Finish: Satin stainless steel. |
| 24 | Standred top pivot |
| 25 | Standred top patch fitting |
| 26 | Standred bottom patch fitting |
| 27 | Standard Lock with Strike plate & EPC |
| 28 | dormakaba pull Handle TGDI-H 450 back to back with 350mm CTC, adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length =450mm, 25mm dia, -SS304 |
| 29 | dormakaba floor stop half dome with 45mm dia with fixing accessories, in satin Chrome |
| 30 | STEEL WORK |
| 31 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 32 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 33 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately |
| 34 | FLOORING WORK |
| 35 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer )with water abJSORption less than 0.08% and conforming to IS:15622 / ISO 13006 of approved make , in all colurs and shades, laid on 20mm thick cement mortor 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm x 600mm |
| 36 | Providing and laying 8mm thick wooden laminated flooring of Krono / Kronotex-Germany/Pergo or equivalent make of 8.0mm thick,AC-4,laid over underlay of polyurethane sheet and foam complete with nosing and all accessories etc,with 4 inch skirting all around all complete as per direction of Engineer-in-charge. i/c 1 ) Flooring, 2) Skirting, 3) A.profile Foam, 4) polythenes etc. Freight & cartage (Base Rate 1290/SQM) |
| 37 | Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/SQM including pointing in white cement complete. Granite of any colour and shade |
| 38 | Providing and fixing granite 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring, kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 SQM |
| 39 | Providing edge moulding to 18 mm thick marble/granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 40 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 41 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade |
| 42 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 43 | Providing and laying 1st quality Ceramic glazed wall tiles thickness to be specified by the manufacturer) in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 44 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 45 | Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona,Fire Red or Dark Emperadore etc. |
| 46 | Providing & Fixing of Linear Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, with resilient waterproof backing, anti allergic which is certified by British allergy foundation, with ten year replacement guarantee. The carpet should have permanent static control & should be fixed with powder coated aluminum angles as per detail. The work should be carried out by the authorized installer of the Company in India. |
| 47 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 48 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 49 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 50 | FINISHING WORK |
| 51 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 52 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 53 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 54 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 55 | Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l. |
| 56 | Finishing walls with Acrylic Smooth exterior paint of required shade,New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 57 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour |
| 58 | ALUMINIUM & GLASS WORK |
| 59 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600.Upto 10 mm depth and 10 mm width |
| 60 | Supply and installation of dormakaba ALTERRA/Equivalent Access and Cabin System for minimal frame, room dividing solutions.Single glazed mullion free demountable glass partition using Toughened/ Laminated glass in proprietary natural anodised/Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be fixed with help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic if required. Glass thickness - 12mm All Profiles are min 1.5mm thickness excluding 20 microns of Anodizing, Standards applicable• Structural stability test accordance to BS 5234: Part2:1992 & EN 1991-1-1:2002• Acoustic test for sound insulation in accordance to DIN EN ISO 10140-2 ASTME-E 90• ALT profile sections are manufactured and tested in accordance to EN573-3, EN755-2, DIN EN 12020 T2 , non- dimensions manufacturing tolerance deviation DIN ISO 2768-1 class C = coarse• Toughened glass complies accordance to BS 6262 (glass supplier specification from market)• Environmental product declaration (EPD) rating accordance to ISO 14025 & EN 15804 • HPDs - Ref HPD Unique Identifier; 22451 & 22452 - Classification : 09 84 00 Acoustic Room Components Approved Makes : Dormakaba/Alloy/Bene |
| 61 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed tothe studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. |
| 62 | 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks) |
| 63 | Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in- Charge. |
| 64 | Providing & fixing in position decorative /frosted glass film fixed to glass as per pattern. Area of application to be measured as maximum length x maximum height of application on that particular piece of glass as per technical specification & instruction of Engineer in charge. (Glass film 3M make Scotchcal Marking Film or equivalent.) |
| 65 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 66 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 67 | Providing & Fixing laminated wooden false ceiling , made in 50x50mm Hard wood frame (Mirandi) center to center 600mm both ways, hang to ceiling with help of hanger support 'L' type G.I angle (25x25mm) and anchor bolt etc. over fixed 11mm thick MDF board with 10x8mm deep groove finish with lacqure polish, 1.0 mm thick approved shade laminate to fixed on MDF board, defects free bubbles free with help of adhesive. as per drawing and to the entire satisfaction of Engineer in charge. ( MDF Boad & Laminate Make Green ply/Century /Merino or Equivalent ,Adhesive make Pidilite or equivalent) |
| 68 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross- T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles |
| 69 | Providing and making cove in gypsum board. false ceiling with all accessories.as per drawing and instructions of Engineer in charge . |
| 70 | U Baffle Ceiling System 50 x 65 in 100mm Module in Pre Coated Wood plain solid Colour. U Baffle Aluminium plain panel (Non-perforated) ceiling manufactured of approved colour consisting of panel size 65 mm deep X 50 mm width using 0.60 mm thick, panel length upto 6.0 mtr. The Baffle shall be rollformed. Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3105 (Al. Mg) for higher strength and good roll forming characteristics. Panels shall be clipped to a baked enamelled Aluminium carrier of 30 mm wide x 47 mm high x 0.5 mm thick, Black Colour coated, one leg of the carriers with cut outs to hold the panels in a module of 150 mm. Panel carrier shall be suspended by means of threaded rod at a distance of 1.20 mtr c/c.Paint Finish: Aluminium panels shall be chromatised for maximum bond between metal and paint enamelled twice under high temperature, Exposed side with a full primer and finish coat on a Continuous Paint Line.Ceiling Finish above U Baffle Ceiling : Ceiling area above U Baffle to be painted in black colour before fixing this system. The Manufacturer should have high precision High Speed Cold Roll Forming Machines with a experience of 10yrs. Product should be able to submit Greenbuilding certification IGBC Green Pro Certificate, Siesmic Zone V Certification & ISO 9001-2015. Fire Rating to comply for BS 476 Part 6 & 7.Mode of Measurements: Measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. |
| 71 | Providing and fixing of wall panelling with moulding 21-48mm width directly on the wall surface with or without any framework with 12mm thick commercial grade ply and then finished with 1.0 mm thick. laminate/ with 4.0mm thk veneer in mellamine polish of approved shade. If the framework is required it shall be of aluminium hollowsections of 50mm x 50mm size 1.5mm thick of JINDAL / INDAL make as internal frame structure placed horizontally & vertically in 550 mm x 550 mm or 600mm x 600mm center to center or as directed by the Architect . All woodwork & laminate shall be finished with two or more coats of Melamine or PU polish over one coat of sealer; all complete as per the instructions of Architect. The rate shall be inclusive of provision of groove with 1.0 mm thick. laminate along all 3 sides of the groove in the panelling of size 12mm x 12mmx 18 mm ht. and as directed by the Architect. This item also includes scaffolding for maximum height upto 4.0 m from floor level. |
| 72 | Providing & fixing interlocking Charcoal wall panel of 2700mmx160mmx240mm fixed to the wall & partition with suitable glue. Complete design -138 of EURO PARATIK or equivalent.(recaption area) |
| 73 | Providing and fixing single skin commercial ply of below mentioned thickness,SS screws fixed with wooden plugs to Existing Aluminium framing of Partition/ Peripheral panelling.The ply should be finished so as to take the second skin of wallpaper/ fabric/ glass/ veneer/ slat panels, etc. directly by applying suitable base coats, primer coats, etc. Necessary cut-outs shall be provided & openings shall be neatly finished after fixing of Switch- Sockets thereby leaving no gaps, etc. complete as per Architect's instruction, detailed design and drawings. 19mm thick |
| 74 | Providing and Fixing roller blind with head channel, traversing cord, and warranty etc as per manufacturer's specifications. Fabric sample to be as instructed and approved by Architect.Providing and fixing Roller Blinds as per the approved sample comprising of sunscreen Fabric comprising of 30% polyester and 70% PVC with openess factor of 5% having a width of 250-300 cm.Fabric weight 428±5% Grams per sqm, Thickness 0.73 mm ±5%, GREENGUARD NFPA701 ceritified fabric. Healty/safety standard - Oekotex Standard 100 and it provides UV protection upto 95%.The fabric has mechanical breaking resistance – warp≥ 1310 N/5cm, Weft: > 1420 N/5cm. Color fastnes to Light Grade 8.The Roller blind system consists of 38mm OD extruded out of Aluminium alloy 6063 T6 with silver anodized to provide an everlasting finish and luster, the rotary unit shall be 36mm in OD incorporating a clutch mechanism composed of low – flexing braided polyster cord with nylon core, Control Ball chain shall be composed of braided nylon cord (2mm dia) with high engineering grade plastic beads of 4.5mm diameter mounted co-axially on the cord with a pitch of 6.2mm (C-T-C) Bottom rail should be powder coated Aluminium flat bottom rail of 290 gm to finish it from the ends it should have rail end caps. The clutch will be at the tube. The return end cap bracket shall incorporate snap spring design to facilitate easy installation and removal for maintenance activities. The bracket shall be finished with a flush mounting cover on each side providing an aesthetic finish. It should handle up to 5 Kgs of material. The clutch should mount flush to the face of the bracket which minimize the light gap between the shade and the window frame. All complete as per approval of designer & instruction of Project Manager. |
| 75 | Providing core cutting in reinforced cement concrete (RCC) using diamond-tipped core drill machine to required diameter and depth for pipes, cables, or ducts, including disposal of debris and cleaning the site. |
| 76 | 100mm dia |
| 77 | 150mm dia |
| 78 | Providing & Fixing of 4mm thk. Commercial Ply Backing from the support of grid and gypsum ceiling to take load of any of the services being fixed on the ceiling, etc. complete as per Architect's instruction, detailed design and drawings. |
| 79 | Providing & fixing Prelam Board Boxing for cassette units fixed in 1200mm x 300mm/ 600mm x 600mm grid ceiling with Aluminium framing as shown in the drawing. Rate shall be inclusive of all necessary cutouts and necessary hardware items required as per design and drawing, etc. complete to the satisfaction of the Architect. |
| 80 | Providing & fixing pelmet of size 300mm deep X 150mm height for roller blinds in 19mm thk. ply finished with approved 1mm laminate internally as per Architect instructions. Block board to be anchored to the structural beam. Fixing detail may vary as per site conditions. Note ply support to be considered till main slab wherever pelmet happens in exposed ceiling area. Rate to be inclusive of the same, etc.complete as per Architect's instruction, detailed design and drawings |
| 81 | Providing & fixing URINAL MODESTY SS MAKE MERINO OR EQUIVALENT\\" \\"Thickness of Compact Laminate : 12mmColor of HPL Boards: Single Standard and Plain Compact Color Size of UMP : 500mm (W) X 900mm (H)Overall Height Of UMP : 1550mm (Including boom Gap of 650mm) Accessories: Standard - Merino Make Stainless Steel - 304 Grade accessories) - SS a) SS Right Angle Brackets b) S.S.Screws 304 G & P.V.C Wall Plugs SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438.\\" |
| 82 | Providing and fixing 25 mm x25 mm Aluminium corner guards with Aluminium capping to the column edges or wall edges etc. wherever required, etc. complete as per Architect's instruction, detailed design and drawings.Make: Bottomline, Inpro |
| 83 | Providing and Fixing fabric backing commercial grade wall paper of approved shade with recommended adhesive of approved make which have 100% washable, scratch resistance, peel proof, and fire retardant properties. Cost to include preparation on the punned surface for receiving the wall paper as per the Manufacturer specifications and Directions, etc. complete to the satisfaction of the Architect. |
| 84 | MS Support for Camera , Wi-Fi and Ceiling Mounted Projector |
| 85 | Providing and fixing Company Name & Logo Signage in Reception/ Entrance Lobby using 12mm acrylic Channel letters + colour as per pantone shade of Dupont make (min 3 coats ) fixing by 3M Double sided tape. Size -600mm x1200mm |
| 86 | Providing and fixing of Door Push - Pull, signages: 1.5 mm SS brushed finish + Etching + Lacquer, + Anodized, fixing by 3M Double sided tape. Size -100mm x 100mm |
| 87 | Providing and fixing of Auto Glow Signages for fire exit, fire escape route map & above access control reader , as per standard design. Size -A2 |
| 88 | Fire Extinguisher signages - size (300mmx180mm) |
| 89 | Fire Extinguisher Stand |
| 90 | Supply and Installation of Pen tray for the pen, duster . size (750x150mm) / (1000x150mm) Make: Bottomline |
| 91 | CARRAIGE OF MATERIALS |
| 92 | SAND (UPTO 10KM LEAD) |
| 93 | BRICKS (UPTO 8KM LEAD) |
| 94 | ELECTRICAL WORK |
| 95 | Point wiring in PVC conduit, with modular type switch :- |
| 96 | Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required. Group C |
| 97 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 98 | Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box etc as required. |
| 99 | Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- |
| 100 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 101 | Circuit / Sub main wiring in PVC conduit :- |
| 102 | Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required |
| 103 | 2x2.5 sq mm + 1x2.5 sq mm earth wire |
| 104 | 2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire |
| 105 | 4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire |
| 106 | S/F light plug point Modular Type Accessories :- |
| 107 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections painting etc. as required. (For light plugs to be used in non residential buildings). |
| 108 | S/F power plug point modular Type Accessories :- |
| 109 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections painting etc. as required. (For light plugs to be used in non residential buildings). |
| 110 | DISTRIBUTION BOARDS & MCB's |
| 111 | Supplying and fixing 6 Amp to 32 Amp rating 240 volts, 10 KA \\"C\\" Curve Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.,as required. |
| 112 | 6/32 amps, Single pole |
| 113 | 40 amps DP |
| 114 | 50/63 amps, TPN |
| 115 | Supplying and fixing Single pole blanking plate in the existing MCB DB complete etc. as required. |
| 116 | Supplying and fixing following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 117 | 6 Way (4 + 18), Double Door Horizontal Type |
| 118 | 8 Way (4 + 24), Double Door Horizontal Type |
| 119 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 120 | 8 way , Double door |
| 121 | 12 way , Double door |
| 122 | S/F DP MCB Isolator |
| 123 | Supplying and fixing following Rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 40 Amps |
| 124 | S/F 4P MCB Isolator |
| 125 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 63 Amps |
| 126 | S/F DP (RCCB) |
| 127 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 40 Amps |
| 128 | TELEPHONE, TELEVISION & DATA SYSTEM (socket,wiring & conduting only) |
| 129 | S/F MODULAR BOXES, BASE & COVER PLATE :- |
| 130 | Supplying and Fixing Following Size/ Modules, GI Box Alongwith Modular Base & Cover Plate for Modular Switches in Recess etc. as Required. 1 or 2 Module (78mm x 78mm x 45mm) |
| 131 | S/F MODULAR TYPE SWITCH / SOCKET :- |
| 132 | Supplying and Fixing Following Modular Switch/ Socket on The Existing Modular plate & Switch Box including connections But Excluding Modular Plate etc. as required. |
| 133 | Telephone Socket outlet. |
| 134 | TV Antenna socket outlet. |
| 135 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm. |
| 136 | Supplying and drawing following pair 0.5 mm dia FR PVC insulated copper conductor, Unarmored Telephone cable in the existing surface/recessed steel/ PVC conduit as required. 2 Pair |
| 137 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 138 | Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have Flame Properties i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required. 1 run of cable |
| 139 | Supplying & Fixing Modular Type Computer jack RJ 45 ISI mark 1 Module on existing Mounting plate and box Complete with all accessories as required. |
| 140 | INTERNAL LIGHTING FIXTURES & FANS |
| 141 | SITC of following rating recess / surface mounted LED round / square shape down light luminarie with pressure die cast housing for single phase supply voltage Luminarie shall be confirm to IS: 10322 part -5 / section -2 or IEC :62722 withh all neccesary accessories as required. |
| 142 | 12W LED Round Down Light |
| 143 | 18 /20 W LED Round Down Light |
| 144 | Supply of LED Mirror Light with power 8/10W rated voltage 230V 50 Hz aluminium/ PC body with rauuning life minimum 30000 Hours |
| 145 | SITC LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) 36 watt |
| 146 | Supply insttalation , testing and commisioning of following size ceiling fan 3 balde confirming to IS : 374:2019 incuding wiring thedown roads of standed lenth ( upto 30 cm ) with 1.5 sqmm PR PVC, insulated copper wire suitable for 230V 50Hz single phase supply etc. compleyte as required. 1200mm (48 Degree) BLDC 5 star rating 32W ceiling fan |
| 147 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) 900mm, service value ≥ 5.1 CM/Min/Watt, air delivery 130 CM/Min (Minimum) |
| 148 | Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc as required. |
| 149 | Installation, testing and commissioning of ceiling fans/bracket fan of all sizes including wiring the down rod .of standard length (up to 30 cm ) with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required. |
| 150 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing |
| 151 | SITC of Rectagular Shape LED Decorative corrosin resistant dia cast aluminium housing surface/suspended LED Luminaries 30 to wo watt |
| 152 | SITC of LED Strip light 24 Volt DC with IP 65 rated in different colours of length 5mtr and 5w per mtr including driver. IS 10322 part5/section 7 |
| 153 | DISTRIBUTION PANELS |
| 154 | DISTRIBUTION PANEL |
| 155 | Design, Manufacture, Supply, Installation, Testing and Commissioning of Feeder Pillar Fabricated out of 16 SWG CRCA sheet steel, IP 54, wall / floor mounting type with rain canopy The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid. |
| 156 | INCOMER : 200 AMP 35KA FP MCCB |
| 157 | BUS BAR : 250 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. |
| 158 | digital voltmeter with selecter switch 1 no digital Ammeter with slecter switch required C/T, LED indicating lamp (RYB)- 1no. |
| 159 | OUT GOINGS : |
| 160 | 4 Nos 63 AMP 4P MCB Including 1 set of Indication Lamp |
| 161 | 1 Nos 100 AMP 4P MCCB Including 1 set of Indication Lamp |
| 162 | 1 Nos 63 AMP 4P MCB Including 1 set of Indication Lamp |
| 163 | 1 Nos 40 AMP DP MCB Including 1 set of Indication Lamp |
| 164 | 1 Nos 100 AMP 4P MCCB Including 1 set of Indication Lamp |
| 165 | complete panel as above and complete |
| 166 | UPS PANEL |
| 167 | Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. |
| 168 | INCOMER : 1 Nos 100 AMP 25KA FP MCCB (Including BY Pass Switch for 20 KVA UPS) |
| 169 | BY PASS Switch for UPS 100 AMP FP - 1 no. |
| 170 | BUS BAR : 125 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. |
| 171 | OUT GOINGS : |
| 172 | 3 Nos 63 AMP 4P MCB Including 1 set of Indication Lamp |
| 173 | 1 Nos 40 AMP DP MCB Including 1 set of Indication Lamp |
| 174 | 2 Nos 63 AMP 4P MCB Including 1 set of Indication Lamp |
| 175 | 2 Nos 40 AMP DP MCB Including 1 set of Indication Lamp |
| 176 | complete panel as above and complete |
| 177 | CABLES & ACCESSORIES |
| 178 | SUPPLY OF L.T. CABLE: |
| 179 | Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098. (Part-I). |
| 180 | 3.5 core, 50 sq.mm. |
| 181 | 3.5 core, 25 sq.mm. |
| 182 | LT CABLE LAYING |
| 183 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 184 | Upto 35 sq. mm |
| 185 | Above 35 sq. mm and upto 95 sq. mm |
| 186 | LT CABLE JOINTING & END TERMINATION |
| 187 | Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. |
| 188 | 3½ X 25 sq. mm (28mm) |
| 189 | 3½ X 50 sq. mm (35mm) |
| 190 | EARTHING |
| 191 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 192 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required |
| 193 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 194 | UPS SYSTEM |
| 195 | SITC - Online UPS- Input supply: Three Phase, Output supply: Three Phase, The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up 20KVA (Each Power module shall be < 10 KVA) |
| 196 | CABLE TRAYS & RACEWAYS |
| 197 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement) |
| 198 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 199 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 200 | RACE WAYS :- |
| 201 | Providing and laying 1.6 mm thick pregalvanized GI factory fabricated raceways of the following sizes including 2 mm thick GI covers, providing knock out holes and all required fixing accessories including 6 SWG GI earth wire complete as required including floor /wall supports, bends, access boxes and tap off boxes as per specification and cross over as per site requirement. Note:- Blue & Orange colour shall be considered for Power & Data raceway respectively. The item shall include the cost of chipping, cutting the floor for laying the raceway and making good the finish including chicken mesh complete as required as per site requirement. |
| 202 | 50x40x15x1.6mm & Cover 2mm |
| 203 | 100x40x15x1.6mm & Cover 2mm |
| 204 | 200x40x15x1.6mm & Cover 2mm |
| 205 | 300x40x15x1.6mm & Cover 2mm |
| 206 | SPLIT AC |
| 207 | 1.Tr. 5 Star split A.C (Inverter Type) IS-1391-part-1 |
| 208 | 1.5Tr. 5 Star split A.C (Inverter Type) IS-1391-part-1 |
| 209 | 2.0Tr. S Star Split A.C (hiverter Type) IS-1391-part-l |
| 210 | Supplying, Installation, Testing and Commissioning of Air Cooled Cassette type Air conditioners complete with Indoorunit(IDU), Out door unit (ODU), R-32/R410A/R-407 Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, 50 Hz ,1 /3 phase AC supply, including surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5.5 Mtr (IDU to ODU), copper power and control cable upto 5.5 Mtr (IDU to ODU) including drain pipe, the system shall be capable of performing cooling, dehumidification, Air circulation, filteration & ventilation of following capacity with Scroll/rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB) as specified. The system shall be able to deliver 100% of the rated capacity as per relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from National Accreditation Board for Testing and CalibrationLaboratories (NABL) accredited as per InternationalElectrotechnical Commission (IEC) 17025standards/Central Power Research Institute (CPRI)/Electrical Research and Development Association(ERDA)with Original Equipment Manufacturer (OEM) etc.complete as per CPWD specification and as per IS: 1391as required. |
| 211 | 3.0 TR with 5 Star BEE Rating |
| 212 | 4.0 TR with 5 Star BEE Rating |
| 213 | Copper Tube of size l I 4 '' for split ac unit 1 /l.5/2/3 tr capac:ty nitride rubber insul;1tion |
| 214 | 4 KVA wall mounted AUTOMATIC voltage STABLIZER from range HOV to 28OV |
| 215 | Drain pipe for ac |
| 216 | Outdoor stand for 1.5Tr Split AC |
| 217 | Outdoor stand for 2.0Tr Split AC |
| 218 | SANITARY INSTALLATIONS |
| 219 | Supplying , fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I 'p' trap 15 liters C.I.pull and let go flushing cistren of names or other I.S.S. equivalent make , complete with all fitting , C.I.or C.C. brackets 32mm alkathene/P.V.C telescopic flush , pipe about 2 M long with one brass coupling and clamps GI ,chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less thane 50grms. 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coats of red oxide primer etc. all complete as per specification and direction of E/I. |
| 220 | (A) 580 mm. long (c) With 10 lit. low level PVC Cistem |
| 221 | Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I.handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all completeas per specification and direction of E/I. |
| 222 | (ii) E.W.C. with 'S' trap (b) 10 lit. low level PVC Cistem |
| 223 | Providing and fixing white vitreous china extended wall mounting water closet of size( CHARM TRAP: (P-23.5) Size: 51 x 37 x 38 cm )of approved shape including (CONCEALO NEO (80MM) Size: 45 x 45 x 8 cm) cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre including seat cover, and cistern CUTE CHROME flush plate fittings, nuts, bolts and gasket etc complete. |
| 224 | Supply of Automatic Infra-Red Sensor Faucet, brass material with chrome-plated finish. Operating pressure: 1 to 4 Bar (minimum 1 Bar). Power: AC 220V, 50Hz. Sensing range: 9–20 cm. Warranty: 10 years on faucet body, 1 year on electronic parts and solenoid valve. Origin: Made in India, IGBC Certified. |
| 225 | Providing and fixing White vitreous table top wash basin size 600 mm x 385 x 195 mm including accessories all complete as per EIC |
| 226 | (b)Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. |
| 227 | (i) 600mm x 450mm size |
| 228 | (c)(iii) C.P. brass liquid soap container |
| 229 | Provinding and fixing wash basin wih C.I brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereever required White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer |
| 230 | Providing and fixing white vitreous china laboratory sink with CI brackets , C.P brass chain with rubber plug 40 mm C.P brass waste and 40 mm CP brass trap with necessary C.P brass unions complete including painting of fittings and brackets , cutting and making good the wall wherever required : Size 600x450x200 mm |
| 231 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in charge. |
| 232 | Providing & fixing PVC waste pipe for sink including PVC waste fitting Complete Flexible Pipe 32/40 mm Dia |
| 233 | Providing and fixing toilet paper holder : C.P. brass |
| 234 | Providing and fixing PTMT Bottle Trap for Wash basin. Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. |
| 235 | Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms |
| 236 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 237 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 238 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 239 | Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted coat hook on door complete. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge. MAKE JAQUAR MODEL NO.- ACN-1161N or EQUIVALENT. |
| 240 | DRAINAGE INSTALLATIONS |
| 241 | Providing, fixing, testing and commissioning of UPVC SWR pipe type 'B' conforms to IS : 13592-1992 with all fittings such as bends, tees, elbow, 'Y', offset, cleaning pipe door, clamps etc. conforming to IS:14735-1999 and steel structural supports etc. including cutting the floors, walls and making good the same in cement concrete 1:2:4 & cement mortar 1:4. The wall thickness of pipe and technical characteristic conforms to IS : 13592-1992 type 'B'. The fitting dimension conforming to IS : 14735-1999. The jointing to be completed with rubber ring joint/solvent weld joint as required/applicable. 110 mm (OD) |
| 242 | Providing, fixing, testing and commissioning of UPVC 'P' trap/floor trap/urinal trap of self cleansing design having 50 mm water seal with or without horn conforming to IS : 14735-1999 including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 hard stone ballast 20 mm nominal size) including cost of cutting and making good the walls & floors wherever required. 110 mm inlet x110 mm outlet. |
| 243 | Providing, fixing, testing and commissioning of UPVC inlet fittings (hopper) receive waste from fixture waste with maximum 3 inlets 40, 50 & 63 mm OD size, fabricated from 110 OD UPVC SWR pipe, UPVC sockets, fixed to UPVC traps including solvent weld joint/rubber ring joint, complete with all civil work set in cement concreate 1:2:4 as required including cost of cutting and making good the walls & floors wherever required. |
| 244 | Providing, fixing, testing and commissioning of UPVC waste Pipe conforming to IS : 4985-2000 class III including all moulding fittings conforming to IS : 7834 (Part-1 - Part -7) 1987 such as tees, bends, reducers, coupling, adopters etc. solvent welded joint as per manufacturer recommendation including cutting and making good the walls, floors, R.C.C. work etc. (For fixtures waste). |
| 245 | 40 mm (OD) |
| 246 | 50 mm (OD) |
| 247 | Providing and fixing UPVC floor drain including all fitting and accessories fixed in cement mortar complete in all respect. 110 mm OD x 63 mm OD |
| 248 | Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. For 100mm dia. Pipe |
| 249 | Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole |
| 250 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround 100mm dia. SW / CI / waste pipes including bed concrete as per standard design |
| 251 | Providing, fixing, testing and commissioning of UPVC rain water pipes (IS : 4985-1983 class-III ) including injection moulded fittings (heavy duty) (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors and making good as required at Site [For Balcony Drain + Terrace Rain Water Downtake Pipe]. 160 OD |
| 252 | WATER SUPPLY INSTALLATIONS |
| 253 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 254 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 255 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore |
| 256 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm dia nominal bore |
| 257 | Provide and fixing PTMT ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D. plastic ball 50 mm dia NB, 242mm long. Weighing not less than 1240 gms. |
| 258 | Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting, including fixing the pipewith clampsat 1 m spacing. This includesjointing of pipes &fittingwith one step CPVC solvent cement and cost ofcutting chases and making good the same including testing ofjoints complete as per direction of Engineer in Charge.(Concealed work including cutting chases and making good the walls etc.) |
| 259 | 15mm nominal outer dia. Pipes. |
| 260 | 20mm nominal outer dia. Pipes. |
| 261 | 25mm nominal outer dia. Pipes. |
| 262 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 50mm diameter |
| 263 | Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified 100 mm nominal bore 50 mm dia. |
| 264 | Providing, laying, Jointing, Testing and commissioning of uPVC pressure pipes of 10Kg/Sqcm pressure rating class 5 (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 50m complete, compaction and consolidation Including laying cement concrete 1:2:4 alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design. 32 OD mm. |
| 265 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 266 | Constructing masonry Chamber 60x45x50 cm,inside with 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for water meter complete with C.I. Doble flap surface box 400x200x200mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks |
| 267 | (PIPING, VALVES AND ACCESSORIES) |
| 268 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :(The Welding shall not be done for piping less than 50 mm dia.) |
| 269 | 150 mm dia |
| 270 | 100 mm dia |
| 271 | 80 mm dia |
| 272 | 65 mm dia |
| 273 | 50 mm dia |
| 274 | 40 mm dia |
| 275 | 32 mm dia |
| 276 | 25 mm dia |
| 277 | Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centrigade with required accessories : Pendent Sprinkler /Upright Sprinkler |
| 278 | Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centrigade with required accessories : Sidewall Sprinkler |
| 279 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 150mm dia |
| 280 | (FIRE EXTINGUISHERS) |
| 281 | Powder Fire Extinguisher (Stored Pressure type) Capacity 09 Kg duly ISI marked conforming to IS: 15683:2006, with IS 14609, ISI marked ABC powder complete with squeeze grip release valve, discharge pipe locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: - 10ºC to + 55ºC. |
| 282 | Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed conforming IS : 15683:2006 4.5kg capacity cylinder |
| 283 | FURNITURE WORK |
| 284 | Make-GodrejSupplying and placing in position of modern design reception desk material : engineered wood - particle board colour : slate grey with frosty white / finish : laminated. main table size : (l)2400 mm x (d)900 mm x (h)750 - 1050 mm. modern design reception desk in engineered wood make the products utile and a delight. timeless design that elevates your office space structure of spacious reception desk, tabletop offers you a generous look for work surface use premium quality materials overall size is (l)2400 mm x (d)900 mm x (h)750 mm which give more surface area for work, table top made of 25mm thick also table top based on side panel's made 18mm thick prelaminated particle board of grade ii type iii of is 12823/latest. combination construction of reception desk above table top 18 mm thick counter top to table top height is @ 300mm, overall reception desk height is @ 1050mm with counter top, table top made 25 mm thick prelam particle board work surface with the exposed edges shall be finished with 2mm thick pvc edge binding tape of matching colour and shade fixed with hot melt glue. along with 18mm thk additional modesty panel size is (l)1800 mm x (h)700 mm made by exclusive frosty white colour with epic design & look.1 mobile pedestal (2 drawers + 1 filing cabinet )size is (l)450 mm x (d)450 mm x (h)725 mm in provided with central lock's for security and handle's are provided for easy of opening & pedestal's move on nylon castors. three layer prelaminated particles board(wood product) of grade ii type iii of is 12823/latest, |
| 285 | Make-GodrejSupplying, and placing in position of SPECTRA/MB/GREY Mesh Back Medium Back Chair, Mechanism Center Tilt Smart, Nylon Base 700mm, Castor (55mm), Matrix Seat Ply, Teliscope Hydraulic Cover, Gaslift 100 mm , Seat Moulded Foam, Dimension (W)655mm X (D)700mm X (H)1110mm, Mechanism Centre Tilt Smart Mechanism, Seating Height NommThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 286 | Make-Godrej. 3 Seater Sofa supplying and placing exclusive premium leatherette modernist classic design lounge seating sofa Size: 1650Wx750Dx710H mm. with kiln-dried wood framing makes it warp and scratch resistant, comfortable seat depth & height designed keeping modern Indian lifestyle in mind, wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging, designed with modernity & elegance, choose the option that suits your home.Combination construction structure is made in moisture content shall be less than (10-12) %. thickness of plywood used (mm) shall be 12 mm grade is 303 Indian standard for commercial (common) and moisture proof plywood (tentative). under structure frame shall be constructed from 18 mm thick kiln-dried German beech wood framing is highly durable. the complete structure shall be covered by P.U. foam fixed with adhesive glue, the frame shall be padded with high resilience polyurethane foam having 25 +/- 5 density in seat it shall be stack foam of 40mm thik,40mm thick back foam having 25 +/- 5 density foam used, there shall be cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 25 +/- 5. the complete stack foam structure shall be covered with premium leatherette in brown-camel brown colour, it complements the modish sleek steel legs.(seat: 545 mm(d) x 410mm(h), arms height @ 610mm / back height @ 290mm)The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 287 | Make- GodrejSupplying and placing exclusive premium leatherette modernist classic design lounge seating sofa Size: 1390Wx750Dx710H mm. with kiln-dried wood framing makes it warp and scratch resistant, comfortable seat depth & height designed keeping modern Indian lifestyle in mind, wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging, designed with modernity & elegance, choose the option that suits your home.Combination construction structure is made in moisture content shall be less than (10-12) %. thickness of plywood used (mm) shall be 12 mm grade is 303 Indian standard for commercial (common) and moisture proof plywood (tentative). under structure frame shall be constructed from 18 mm thick kiln-dried German beech wood framing is highly durable. the complete structure shall be covered by P.U. foam fixed with adhesive glue, the frame shall be padded with high resilience polyurethane foam having 25 +/- 5 density in seat it shall be stack foam of 40mm thik,40mm thick back foam having 25 +/- 5 density foam used, there shall be cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 25 +/- 5. the complete stack foam structure shall be covered with premium leatherette in brown-camel brown colour, it complements the modish sleek steel legs.(seat: 545 mm(d) x 410mm(h), arms height @ 610mm / back height @ 290mm)The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 288 | Make-Godrejsupplying and placing exclusive premium leatherette modernist classic design lounge seating sofa Size: 850Wx750Dx710H mm. with kiln-dried wood framing makes it warp and scratch resistant, comfortable seat depth & height designed keeping modern Indian lifestyle in mind, wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging, designed with modernity & elegance, choose the option that suits your home.Combination construction structure is made in moisture content shall be less than (10-12) %. thickness of plywood used (mm) shall be 12 mm grade is 303 Indian standard for commercial (common) and moisture proof plywood (tentative). under structure frame shall be constructed from 18 mm thick kiln-dried German beech wood framing is highly durable. the complete structure shall be covered by P.U. foam fixed with adhesive glue, the frame shall be padded with high resilience polyurethane foam having 25 +/- 5 density in seat it shall be stack foam of 40mm thik,40mm thick back foam having 25 +/- 5 density foam used, there shall be cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 25 +/- 5. the complete stack foam structure shall be covered with premium leatherette in brown-camel brown colour, it complements the modish sleek steel legs.(seat: 545 mm(d) x 410mm(h), arms height @ 610mm / back height @ 290mm)The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 289 | Make-GodrejSupplying, and placing in position of Penrose, Coffee Table Material & Subtype Laminate, Solid Wood - Steam Beech Wood, Engineered Wood - Particle Board, Table Top Material Laminate, Engineered Wood, Frame Material Engineered Wood, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Grey - Light, Brown - Dark Oak, Dimension (W)1100mm X (D)500mm X (H)450mm, Table Top Thickness 18mm.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 290 | Make-Godrej.Supplying, and placing in position of table as per photograph. Overall Size: 2800Wx2330Lx770H mm. This precise Durian Boss's Desk is designed with superb quality Finish made of engineered wood-medium density fibre board & veneer glossy finish on the same. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size. The modesty frame of the table gives the great look with panel upholstered with PVC material which gives the leatherette look. Main Table top thickness 80mm, side panel/gable end in 70mm thick MDF with Veneer glossy finish. Side runner having a skirting @120mm thick with gives a rich look. The office desk comes with the side runner having enough storage space. The side runner top with a thickness of 80mm thick that gives the great look. Side table, side panel, shelves, drawers made up of 18mm thick MDF with Veneer finish. Table having a provision of Pedestal of size: 400Wx500Dx660H mm having three drawers to store essential & unrestructured made out of 18mm thick MDF with Veneer finish. Drawers have the stylish handle which enhance the look. Material & Subtype: Engineered Wood - Medium Density Fibre Board, Colour & Colour Family: Red - Cherry. Side storage unit having a side panel, one drawer, one shutter & one shelf of 18mm thick MDF with Veneer finish. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 291 | Make-Godrej.Supplying, and placing in position of modular back unit Size: 2400Wx400Dx1040H mm. top shall be made from 25 mm thick prelaminated particle board/veneer - MDF/steam beech veneer of grade ii type iii of is 12823/latest & confirm to din 68861.iso 9001- 2015. While rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelaminated particle board/veneer - MDF/steam beech veneer P.U polish. all edges to be provided with same matching veneer edge banding fixed with the hot melt glue. Storage unit with 3 open carcass, 4 shutters + 3 drawers’ construction is below the top 3 open carcass shelves at same size per carcass size is 555 (l) x 380 (h) ,2 openable doors with 1 fixed shelve + 3 drawer + 2 openable doors with 1 fixed shelve, in provided with 2 universal cam lock + 1 central locks for drawers for security and handles are provided for easy of opening. over all height of product is @ 1040 mm. Each shutter should be fixed with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall have 100 mm size ss fancy handles (one on each drawer) with necessary hardware/ fitting/ hinges etc. of approved quality (make: ebco). for installation of side unit wooden dowels and Mini fix to use for additional support.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 292 | Make-Godrej.Premium Leatherette Chair, High BackSupplying, and placing in position of high back 360°-degree revolving chair.Dimension: 640Wx500Dx1210H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 655mmThe chair made of full leatherette in black colour.it will come in matte finish in contemporary style.details:Arms: fixed chrome finish arms with PU padding.Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat and back).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar support. Mechanism: centre tilt mechanism.Only seat size is 665mm(l)x 500mm(d)x 580-495mm(h) & the back size is 665mm(l)x 580mm(h),seat maximum height is 635mm & minimum height is 540mm & back height from floor maximum height is 1210mm & minimum height is 1110mm. Gas lift 85mm telescopic hydraulic. Base: 650 mm shiny chrome base with nylon castors shall be 65.0 +/- 0.5 cm pitch-centre-Dia (75.0 +/- 1.0 cm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 293 | Make-Godrej. Premium Leatherette Chair, Low BackSupplying, and placing in position of low back 360°-degree revolving chair. Dimension: 625Wx490Dx1135H mm. Seat depth: 490mm, Back Height: 560mm. The chair made of full leatherette in black colour.it will come in matte finish in contemporary style.details:Arms: chrome finish arms with PU padding.Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat and back).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar support. Mechanism: centre tilt mechanism.Only seat size is 625mm(l)x 490mm(d)x 660-535mm(h) & the back size is 625mm(l)x 560mm(h)seat maximum height is 660mm & minimum height is 535mm & back height from floor maximum height is 1135mm & minimum height is 1035mm. Gas lift 95mm telescopic hydraulic. Base: 650 mm shiny chrome base with nylon castors shall be 65.0 +/- 0.5 cm pitch-centre-Dia (75.0 +/- 1.0 cm with castors)The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 294 | Make-Godrej Leatherette 3 Seater Sofa in Olive GreenSupplying and placing in position of Clarkson, Leatherette 3 Seater Sofa in Olive Green Material & Subtype Premium Leatherette, Metal- Stainless Steel, Frame Material Solid Wood, Upholstery Material Premium Leatherette, Filling Material Pocket Spring, Foam, Seat Material Premium Leatherette, Leg Material Metal, Finish Matte, Colour & Colour Family Green - Olive, Dimension (W)2085mm X (D)1020mm X (H)900mm, Seating Capacity 3 Seater, Seating Height 475mmThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 295 | Make-Godrej Clarkson, Leatherette 1 Seater Sofa in Olive GreenSupplying and placing in position of Clarkson, Leatherette 1 Seater Sofa in Olive Green Material & Subtype Premium Leatherette, Metal- Stainless Steel, Frame Material Solid Wood, Upholstery Material Premium Leatherette, Filling Material Pocket Spring, Foam, Seat Material Premium Leatherette, Leg Material Metal, Finish Matte, Colour & Colour Family Green - Olive, Dimension (W)1170mm X (D)1020mm X (H)900mm, Seating Capacity 1 Seater, Seating Height 475mmThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 296 | Make-Godrej Coffee & Center Table with Marble Finished TopSupplying, and placing in position of Carla, Coffee & Center Table Material & Subtype Plastic - Acrylic, Metal - Mild Steel, Engineered Wood - MDF, Table Top Material Acrylic, Leg Material Metal, Finish Matte, Colour & Colour Family Grey - Ash, White - Off, Dimension (W)1200mm X (D)600mm X (H)460mm, Table Top Thickness 4mmThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 297 | Make-Godrej Valeria, Fluted Side Table with Marble Finished TopSupplying, and placing in position of Valeria, Fluted Side Table with Marble Finished Top Material & Subtype Marble - Composite, Metal - Mild Steel, Engineered Wood - MDF, Table Top Material Marble - Composite, Leg Material Metal, Finish Glossy, Colour & Colour Family Grey - Ash, White - Off, Dimension (W)455mm X (D)455mm X (H)460mm, Table Top Thickness 9mmThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 298 | Make-Godrej Tweed 3 Seater Reclining Sofa Supplying, and placing in position of Canyon, Tweed 3 Seater Reclining Sofa Material & Subtype Fabric - Tweed, Composition Polyester, Frame Material Solid Wood, Metal, Upholstery Material Fabric - Tweed, Filling Material Foam, Seat Material Fabric - Tweed, Finish Matte, Colour & Colour Family Beige - Greige, Dimension (W)2090mm X (D)930mm X (H)1030mmNumber Of Recliners 2, Number Of Reclining Positions 1, Mechanism Manual, Seating Capacity 3 Seater, Seating Height 490mmThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 299 | Make-Godrej Side Table with Laminate TopSupplying, and placing in position of Penrose, Side Table Material & Subtype Laminate, Solid Wood - Steam Beech Wood, Engineered Wood - Particle Board, Table Top Material Laminate, Engineered Wood, Frame Material Engineered Wood, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Grey - Light, Brown - Dark Oak, Dimension (W)450mm X (D)400mm X (H)500mm, Table Top Thickness 18mm.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 300 | Make-GodrejSupplying and placing in position of director desk director table structure of l-shape desk . primary work surface over all size is 2000mm (lx 1800mm (dx 755mm (h 45mm thick table top made of prelaminated particle board work surface with warm walnut finish, 2mm thick pvc edge banding made of same matte finish. side panel is made of 45mm thick . provision of side runner of size is 1800mm (lx 500mm (dx 660mm (h ,(combination construction- table top based on ss stud grade 304 right side below from table top side runner have 2 doors storage + 3 drawers with central lock for security and + 1 open box fixed shelve & left side below ss stud 1 fixed pedestal top 25mm thick size is 400mm (lx 500mm (dx 650mm (h. fixed pedestal of size 495mm (lx 750mm (dx 755mm (h , having 1 openable door with central lock for security and handles are provided for easy of opening. three layer prelaminated particles board(wood product of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 301 | Make-Godrej. File Cabinets & SideboardsSuppling & placing position of modular back unit Size: 1600Wx450Dx800H mm. top shall be made from 18 mm thick prelaminated particle board of grade ii type iii of is 12823/latest. While rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelaminated particle board. machine pressed exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade fixed duly pasted with the assistance of edge banding machine at 200 degrees Celsius. Storage unit with 4 shutters construction is 1 openable door with 1 fixed shelve + 2 openable doors with 1 fixed shelve + 1 openable door with 1 fixed shelve, in provided with 3 universal cam lock for security and handles are provided for easy of opening. over all height of product is @ 800 mm. Each shutter should be fixed with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall have 100 mm size ss fancy handles (one on each drawer) with necessary hardware/ fitting/ hinges etc. of approved quality (make: ebco). for installation of side unit wooden dowels and Mini fix to use for additional support. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 302 | Make-GodrejSupplying and placing in position of 360 degrees revolving high back chair as per photograph.the camden leatherette office chair of size:- (w)655mm x (d)500mm x (h)1230mm is a ergonomic high back chair made for a business tycoon or a director. the seat is constructed from a combination of resilient plywood and soft foam for a comfortable seat. the foam cushions are encased in a chocolate brown leatherette upholstery. the seat arms come padded with foam and are covered in the same brown upholstery for a relaxed armrest. powered by a synchro multi locking mechanism the chair offers you extreme comfort as per your seating position. the chair to be provisioned with tilt tension control and synchro multilocking mechanism. the chair to be provisioned with pneumatic height adjustment which shall have stroke of 10.Premium Leatherette Chair,High Back, Material & Subtype Premium Leatherette, Upholstery Material Premium Leatherette, Seat Material Premium Leatherette, Leg Material Chrome, Finish Glossy, Colour & Colour Family Brown, Mechanism Synchro Multi Locking, Seating Capacity 1 Seater, Seating Height 470mm, Maximum Seating Height 530, Function Pneumatic Height Lift,Tilt Tension Control,Revolving, Size Standard, Style Contemporary, Assembly Type Knock DownThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 303 | Make: Godrej Premium Leatherette Chair, Medium BackSupplying and placing in position of 360 degrees revolving low back chair as per photograph. the camden leatherette office chair of size: (w)555mm x (d)500mm x (h)1105mm is a ergonomic low back chair made for a business tycoon or a director. the seat is constructed from a combination of resilient plywood and soft foam for a comfortable seat. the foam cushions are encased in a chocolate brown leatherette upholstery. the seat arms come padded with foam and are covered in the same brown upholstery for a relaxed armrest. powered by a synchro multi locking mechanism the chair offers you extreme comfort as per your seating position. the chair to be provisioned with tilt tension control and synchro multilocking mechanism. the chair to be provisioned with pneumatic height adjustment which shall have stroke of 10. Premium Leatherette Chair, Low Back, Material & Subtype Premium Leatherette, Upholstery Material Premium Leatherette, Seat Material Premium Leatherette, Leg Material Chrome, Finish Glossy, Colour & Colour Family Brown Mechanism Synchro Multi Locking Seating Capacity 1 Seater, Seating Height 480mm Maximum Seating Height 540, Function Pneumatic Height Lift,Tilt Tension Control,Revolving, Size Standard, Style Contemporary, Assembly Type Knock DownThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 304 | Make-Godrej.Velvet 2 Seater Sofa with Leatherette Side PocketsSupplying and placing in position of two seater sofa Dimension (W) 1500mm X (D) 940mm X (H) 920mm Seating Height 520mm, Arm height 780mm, Seat Depth 540mm, Back Height 440mm, Material & Subtype Premium Leatherette, Solid Wood - Steam Beech Wood, Fabric - Velvet, Composition Polyester, Frame Material Solid Wood, Upholstery Material Fabric - Velvet, Filling Material Foam, Seat Material Fabric - Velvet, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Beige - WesterThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 305 | Make-Godrej Velvet 1 Seater Sofa with Leatherette Side PocketsSupplying and placing in position of Single seater sofa Dimension (W) 900mm X (D) 940mm X (H) 920mm Seating Height 520mm, Arm height 780mm, Seat Depth 540mm, Back Height 440mm Material & Subtype Premium Leatherette, Solid Wood - Steam Beech Wood, Fabric - Velvet, Composition Polyester, Frame Material Solid Wood, Upholstery Material Fabric - Velvet, Filling Material Foam, Seat Material Fabric - Velvet, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Beige - WesterThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 306 | Make: Godrej , Solid Wood Coffee Table in Walnut FinishSupplying, and placing in position of Rubik, Solid Wood Coffee Table Material & Subtype Solid Wood - Steam Beech Wood, Table Top Material Solid Wood, Frame Material Solid Wood, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Brown - Walnut, Dimension (W)1200mm X (D)600mm X (H)465mm, Table Top Thickness 22mmThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 307 | Make: Godrej Solid Wood Side Table in Walnut FinishSupplying, and placing in position of Rubik, Solid Wood Coffee Table Material & Subtype Solid Wood - Steam Beech Wood, Table Top Material Solid WoodFrame Material Solid Wood, Leg Material Solid Wood, Finish Matte, Colour & Colour Family Brown - Walnut, Dimension (W)400mm X (D)400mm X (H)510mm, Table Top Thickness 22mmThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 308 | Make: GodrejSupplying and placing in position of office desk structure of l shaped desk. Table Size: 1500Wx600Dx750H mm. Side Unit Size: 900Wx450Dx750H mm. Primary work surface 25mm thick table top made of prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue. modesty panel 18made of mm thick. Provision of side unit of size is mm(l)x 450mm(d)x 750mm(h), (combination construction wire management hole with PVC grommet on table top, left side table top based on a 18mm thick side panel engineered wood & from right side unit have 2 sliding doors + 1 fixed shelve. Side unit in provided with lock for security and handles are provided for easy of opening. Overall construction of side unit is 18mm thick along with facia of sliding shutters. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 309 | Make-Godrej Back Storage Size: 1500Wx450Dx750H mm.Supplying, and placing in position of storage as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 310 | Make: GodrejSupplying, and placing in position of Excat High Back Office Revolving Chair Dimension (W)675mm X (D)660mm X (H)1305mm With Cushioned Seat And Adjustable Armrest.Back:- Upholstered With Mesh, Seat:- Plywood Hot Compressed Upholstered With Fabric.Armrest:- 2D Adjustable With Pu Pad, 1D Handle ( Grey ) With Pu Pad ( Black )Mechanisam:-Synchro With Single Locking And Tension Adjustment. Base:- Nylon Base GreyMechanism: Syncro With Single Locking & Tension AdjustmentThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 311 | Make-Godrej.Supplying, and placing in position of Excat Medium Back Office Revolving Chair Dimension (W)675mm X (D)660mm X (H)1110mm With Cushioned Seat And Adjustable Armrest.Back:- Upholstered With Mesh, Seat:- Plywood Hot Compressed Upholstered With Fabric.Armrest:- 2D Adjustable With Pu Pad, 1D Handle ( Grey ) With Pu Pad ( Black ), Mechanisam:-Synchro With Single Locking And Tension Adjustment. Base:- Nylon Base GreyMechanism: Syncro With Single Locking & Tension AdjustmentThe Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 312 | Make: GodrejSupplying and placing in position of modern design conference tabl milburn conference desk with cable organisers size :- (w) 3800mm x (d) 1200mm x (h) 760mm.material - engineered wood - mdf. table top material- engineered wood. leg material- engineered wood. finish matte. colour & colour family- brown - walnut. experience the perfect harmony of artistry and practicality with our sculptural milburn collection. an intricately grooved panel on the tabletop and designer base add character to this conference table, while the circular cable organisers ensure a tidy setup. crafted from premium engineered wood in walnut finish. spacious tabletop accommodates multiple participants, ideal for collaborative discussions and presentations. intricately grooved wooden panel and designer base add character to the tabletop. circular cable organisers ensure a tidy and clutter-free workspace. premium pu polish with low chemical emissions ensures healthy indoor air. this product is a part of the milburn collection. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 313 | Make-Godrej. Premium Mesh Chair, High BackSupplying, and placing in position of high back 360°-degree revolving chair. Chair Dimension: 640Wx670Dx1350H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 815mm The chair made of full mesh in black colour.It will come in matte finish about style type is modern. Details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 815mm(h),seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1350mm & minimum height is 1250mm.Gas lift 100 mm telescopic hydraulic. Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 314 | Make: Godrej. Premium Mesh Chair, Medium BackSupplying, and placing in position of medium back 360° degree revolving.Chair Dimension: 640Wx670Dx1100H mm. Seating Height: 540mm, Seat depth: 500mm, Back Height: 570mm. The chair made of full mesh in black colour.It will come in matte finish about style type is modern.details:Arms: armrest is having two adjustment heights (up & down).Use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat).Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, Back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support. Mechanism: self-weighted multi locking mechanism.Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 570mm(h) seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1100mm & minimum height is 1000mm. Gas lift 100 mm telescopic hydraulic Base: 650 mm chrome prong base is 620mm pitch centre Dia (660mm with castors).The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 315 | Make-Godrej.Supplying of the 2 Bay Compactor having (U/C + Fittings + Cover) The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns .For D3 each movable undercarriage shall be provided with 2 rollers on the shaft for driving , 2 antifriction ball bearing for rolling and 4 antifriction ball bearing for guiding between rail . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA V-2019, GREENPRO, GREEN GUARD GOLD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and 25 or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and IGBC certification and an official product link/screenshot of the product listing's must be provided from www.bifma.org. The OEM should be BIS approved 17631,17632, 17633 madatory by law ministry of commerce and industry.all complete as per specifications and direction of Engineer-in-Charge. |
| 316 | 2 Bay Single Face Movable (SFM) Size: 1800Wx450Dx2400H mm. |
| 317 | 2 Bay Double Face Movable (DFM) Size: 1800Wx900Dx2400H mm. |
| 318 | 2 Bay Single Face Fixed (SFF) Size: 1800Wx450Dx2400H mm. |
| 319 | Make: Godrej Workstation Size: 1200Wx600Dx750/1200H mm. With Pedestal Size: 400Wx450Dx725H mm.Supplying and placing in position of sliding tile base modular Workstation of 1200mm(H) as per photograph/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated Particle tiles of approved shade. Partition shall have provision for pin up board with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Particle board of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature Provision of one PVC keyboard tray and Metal CPU trolley with lockable castors for each seating.Combination construction below table top fixed pedestal size 400 mm(l)x 450 mm(d)x 725 mm(h) - (2 drawers + 1 filling drawer), 18 mm thick made of prelaminated particle board duly edge baned. The Seller / Company should be ISO 9001:2015, ISO-14001:2015, ISO-37001:2016, OHSAS 18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, GREEN GUARD, INDIAN DESIGN MARK, AIOTA, FSC, BIFMA Level- 1 certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL-1 certified and an official product link/screenshot of the product listing's must be provided from www.bifma.orgall complete as per specifications and direction of Engineer-in-Charge. |
| 320 | AUDIO & VISUAL CONFERENCE SYSTEM |
| 321 | Grooved Wooden Slats (GW Slats) Wall Paneling Upto 4 ft Height from Floor |
| 322 | Supply and Fixing of Envirotech Systems Ltd Groove Wooden Slats Wall Panelling 50mm in thickness. (GW Slats) G-21 Groove Wooden Slats Panel size: 192x2420x15MM. Supply of approved (GWSlats™) G 21 Grooved and Helmholtz fluted perforated panels of width 192mm, thickness of 15mm and length 2420 mm or as required by the Architect/ approving engineer, made of Medium Density Fibre board with 595-700 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a Helmholtz fluted perforation of 3mm Groove and 21mm of visible Pitch C/C. The edges of the panels shall be tongue-and-grooved to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.90. To be installed over Wooden/Ply Batten with Headless Nails and infill area filled with compressed 50mm thick Glass Wool 24kg/m3 Density for best NRC value. design Preferable Make : Envirotech; Sun India , Tarel |
| 323 | Wall Paneling above the 4ft Height to false ceiling height |
| 324 | Providing and Fixing of Envirotech Systems Acoustic Glass Fiber Fabric Wall Paneling (FABLAM) Acoustic panels of Square, Rectangular shapes as per Architectural intent for following specifications : Acoustical panels shall be constructed of 25 mm in thickness in Square Edge profile with mica laminate fixed edge treatment. Fabric Finish of approved color and shade shall be applied directly to the face and edges of the panel and return to the back of the panel, Minimum of 30mm+ to provide a full finished edge. All corners are fully tailored. Acoustical Wall Panels shall have a NRC value of 1.0 in accordance with IS:8225/ISO:354/ASTM 423C/TRN38/13-14, Mounting Type -E. Glass Fiber Panel shall have a Class “A” flame spread rating of 25 or less. Mounting shall be over Griper/adhesive/ impaling clips/ fasteners, (i.e. nails, screws etc.) over ply batten fixed through screws on GI framework infilled with 50mm thick Acowool. Standard continuous wall leveling angle are to be provided by client and approved by consultant. Size of the panel 600x1200mm, 600x600mm or as per design.Preferable Make : Envirotech; Sun India , Tarel |
| 325 | Acoustic Ceiling Panels |
| 326 | Supply of Envirotech Systems Micro Perforated Acoustic Paneling (MICROPERF). MICROPERF Perforated Acoustic Panels are made of Micro Perforated Mica laminate Sheet and High Density Perforated Acoboard with rigid fixtation can be installed over Ceiling and Wall. The MICROPERF Perforated Acoustic Panels top sheet will be of 0.80mm thick Mica laminate with Micro Perforation Punch (Micro Perforation Circular Dia 0.60mm at a distance of 03 mm c/c as per acoustic design and desired shade as per Engineer In charge / Architect’s approval. The Base Boards of MICROPERF Acoustic Panels are made of 09-15 Denier thick fiber, Fiber Cut Length -50/60mm, Non-Bacterial, Thermal Bonded as per acoustic design for best NRC value. Size of the MICROPERF Panels 595x595mm with square edge as per acoustic design. MICROPERF Acoustic Panels can be fixed on T24 Grid System as per the instructions lay down by the manufacturer. Cavity of grid shall be filled with 50mm thick Acowool for best noise absorbent value of 0.86 NRC value T24 grid system of 0.6mm thick, Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm, web minimum 35 mm, inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, specially designed for Acoustic Vibration management and long life. The Panels colour as per Consultant / Architect’s approval. Density - 200kg/m3; Core – Acoboard; Fire Retardant Eco Friendly 100% Termite and Borer Resistant Light (%) - As per colour selection.Preferable Make : Envirotech; Sun India , Tarel With 8”’ x 8”, 18 Watt Down Lights (LED) – 12 nos. |
| 327 | Specifications: Hardened surface with Anti Scratch & Anti Glare Surface • LED with min, 60 Hz refresh rate • Resolution : 3840x2160 (Min.) (for Landscape) • Aspect Ratio: 16:9 • Viewing Angle Range (Min.) : 176° (Horizontal) to 176° (vertical) • 450 cd/m2 • Contrast Ratio : 10000:1 • active display area – 1895.04(H) x 1065.96 (V)ii. Operating System • Power Supply : 240 V : 50 Hz • Operating temp : 0o C to 50o C • Operating Humidity : 10% to 80% • Wall Mountable iii. Audio • Inbuilt speakers (15 W x 2 – minimumfor each speaker) – Total 30 watt. iv. Remote • Remote Controller (Full functional; remote with batteries)Input/output (I/O) Systemi.HDMI(ver 2.0)- Min. 2parts ii. HDMI(ver 2.0)- Min. 2parts iii. RJ 45 – Min 1 port (with 5m Patch Cable) iv. Wifi (802.11 b/g/n/ac) with Hotspot feature v. VGA /RGB/HDMI output (with cable toconnect external monitor/ device) vi. USB (2.0) – Min. 2Ports = USB (3.0) – Min.1 Port |
| 328 | Touch System:i. Type : Infra Red Basedii. Inputs for Touch : Finger, Gloved Fingers, Opaque Objects/ Touch Pensiii. No. Of touch pens (with suitable tray/pen holder) :qty 2 iv. Touch scan rate : 50 scans/ sec (min) v. Touch Points : Multi touch ( min 10 touch points) vi. Response Time :< 15 msec vii. Touch accuracy : + 2 mm (Over 90% Area)i. Hardware : • (Min) Quad Processor based SoC (processor > 2.2 Ghz) ii. Operating System • Android/Linux/Open Source based O.S.iii. Software Apps (Pre Loaded) • Content Management Systems & Apps to support writing, Drawing Eraser, Screen Capture, Video Player, Recording, File & Folder Manager, Storage Management, Printer, Email, etc. • web Browser • Screen Sharing (Mira Cast)/(Google Cast) • Factory Resetting • Security features – Pin based and / or Password based. • Over the Air update of Apps & O.S. |
| 329 | 12x HD IP PTZ Camera - Approved Brands - Lumens / Siemens / Barco / Polycom. Video Format 1080p: 60 / 50 / 30 / 25 720p : 60 / 50 Video Output (HD) Interface HDMI / Ethernet / USB 3.0 Optical Zoom 12x Digital Zoom 12x Viewing Angle 72.5° (H) 40.8° (V) 83.2° (D) Aperture F1.6~F2.8 Focal Length 3.9mm~46.8mm Shutter Speed 1/25 ~ 1/10,000 sec Minimum Object Distance 1/1.5m (Wide/Tele) Video S/N Ratio > 50dB Minimum Illumination 1.0 lux (F1.6, 50IRE, 30fps) Focus System Auto / Manual Gain Control Auto / Manual White Balance Auto / Manual Exposure Control Auto / Manual, WDR Yes 3D NR Yes Image Flip Yes Auto Framing Yes Pan & Tilt Panning Angle +170° ~ -170° Panning Speed 0.2° ~ 120°/sec |
| 330 | 75” HDD EDLA series LED Interactive Digital Board with 450cd2 (D-LED) brightness with inbuilt speaker, inbuilt Android 13.0 ; 32GB RAM /512GB ROM. 8 MP Camera and 8 Arrey Microphones, Approved Brand – BARCO, HYUNDAI, CHRISTIE, PHILIPS |
| 331 | AUDIO SYSTEM SOLUTIONS |
| 332 | DIGITAL WIRED AUDIO CONFERENCE SYSTEM, DIGITAL SIGNAL PROCESSOR ETC FOR CONFERENCE ROOM |
| 333 | SITC of Tabletop Chairman Discussion Unit with removable microphone capability connector with possibility to use different microphone lengths (30, 40, 50, 60, 70 cm, Full Flex). Fail-safe redundancy feature, Chairman Discussion Unit with Digital Signal Processing. Unit with Priority and Next-in-Line Configuration. Priority button silences all delegate microphones and allows only the chairperson to speak. Next-in-line button gives the floor to the next speaker in a waiting list of speakers who requested to speak. User button with feedback. High-quality integrated loudspeaker, minimum 4W or better. Audio quality : 16 bit digital or better. Microphone Frequency response: 25 Hz-15,000 Hz or better. 3.5 mm stereo jack socket for headphones output with volume adjustment. Connectivity: › Concealed conference bus connections. › 2 x RJ 45 ethernet port (IN/OUT - interchangeable). › Loop through, daisy-chain cabling (non-proprietary). Unit with Bi color bar indicator. Certification: CE; BIS. 2M Connection Cable should be from same OEM. (Approved make- Televic/Audix/Marcony) |
| 334 | SITC of Tabletop Delegate Discussion Unit with removable microphone capability connector with possibility to use different microphone lengths (30, 40, 50, 60, 70 cm, Full Flex). Fail-safe redundancy feature, Delegate Discussion Unit with Digital Signal Processing and Microphone On / Off button with feedback. High-quality integrated loudspeaker, minimum 4W or better. Audio quality : 16 bit digital or better. Microphone Frequency response: 25 Hz-15,000 Hz or better. 3.5 mm stereo jack socket for headphones output with volume adjustment. Unit with Bi color bar indicator. Certification: CE; BIS. 2M Connection Cable should be from same OEM. (Approved make- Televic/Audix/Marcony) |
| 335 | SITC of Rack-Mountable Central Conference Controller with Recording & Web Server with Hybrid ready via direct USB interface. The controller should support total cable length of a branch / loop are minimum 400M or more. The maximum cable length between units or between units and central unit is minimum 80M or more. Control & configure the controller via the Integrated Web Server. The Controller easily integrated by using USB audio, AES-67 and analogue audio. The central engine can control minimum 250 or more units by adding network extenders. Hands-free mode minimum 16 microphones or more. Camera control integration capability. The conference units are connected in daisy chain with a CAT5e or better shielded cable (non-proprietary) over the 4 bus connections. AES67 and the multi-channel USB connection which allows to link the system with external devices such as a DSP or an external recording solution. The controller can be configurable in DSP Mode. Audio configurator, can choose where the audio is routed to and group microphones and speakers together. Recording capabilities › Internal storage- 3GB or more and external flash drive via USB-C in a PC via multi-channel USB connection, Power button, Fan-less operation, Extended power, Wake-On-Lan, Auto Power-on, ECO mode Volume dial- adjusts the system volume, Record button-for starts or stops the recording. Audio & Control feature like Dynamic Mix-Minus, Gain Sharing, API Control, Connectivity: 4x Bus connections (4 branches or 2 loops), LAN connection (Control & AES-67), 2x Lockable USB-C connections for Flash drive interface. 2x Balanced XLR inputs, 2x Balanced XLR outputs, 1x Front-facing 3.5mm input & output jack for line or microphone level. 1x Power connection. Link speed 10/100 Mbps - 1 Gbps or more over the Network. Included power supply for central unit: 48 VDC. Certification: CE (Approved make- Televic/Audix/Marcony) |
| 336 | SITC of Connection CAT5e cable 10M: Conductor size: 24 AWG (7 × 0.20 mm + 0.005 mm) stranded copper wire, Dielectric diameter: 0.95 + 0.03mm, Plug: Modular U.S. shielded type 10P10C, Jacket Material: LSZH, 10m black from the same conferencing system OEM (Approved make- Televic/Audix/Marcony) |
| 337 | SITC of Digital Audio Processor for Configuring VC system with Conference system 6 Channel Digital ProcessorInputs : 4 balanced mic, 2 balanced Mic/Line,1 stereo unbalanced inputInputs equipped with Low-cut filter, phase inversion and 4-band EQOnboard AEC processing; 1 stereo and 2 mono outputs Each output channel equipped with adjustable output level, 12-band fully parametric EQ with notch filtering, compressor, limiter, and 8-band feedback suppressor. 2-channel USB audio interface 8 x 3 audio routing matrix; Maximum Gain : 64 dB or better Dynamic Range : 110 dB or better; Signal-to-noise ratio:90 dB or better Front panel Monitoring, Controls and LED indicators; Web Remote functionality IP control for third-party CCS administration; Cascadable upto 6 units Euroblock connectors Accessories : Rack-mount adapters Approved make : Biamp / Clearone / QSC / Audio Technica / Shure |
| 338 | Labour Charges, Installation charges, commissioning charges and Programming charges for all the above Mentioned items |
| 339 | GST@18% |
| 340 | Labour Cess @1% Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
