|
| 1 | Earth work in all kinds of soil (Oridinary + Hard + Stony+ Slushy). |
| 2 | Earth work in all kinds of soil 2nd depth(1.50m to 7.50Mtr depth) |
| 3 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-charge. |
| 4 | Providing and Laying Pre-cast Kerb stone on CC(1:1½:3) using 12mm to 20mm size Crusher Broken Chips including cost of all materials , conveyance, royalty & taxes, etc., complete. |
| 5 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 6 | First class Fly Ash brick work in cement mortar (1:4) in foundation and plinth with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 7 | Supplying all labour, materials, T&P for Cement Concrete M-20 for reinforced cement concrete works in using 12mm to 20 mm size hard granite Crusher Broken chips including cost of materials,royalty & conveyance charges with watering,curing all complete as per direction of Engineer-in-charge.a) RaftColumn Base |
| 8 | Plinth Band |
| 9 | Lintel |
| 10 | Column |
| 11 | Roof Slab |
| 12 | Straightening, cutting, bending and binding, welding and jointing (if necessary) coiled/bent up M.S. rods/Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 guage binding wire required for R.C.C. work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wires will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S. rods or Tor steel linear measurements of rod for finished item of works. 5 % wastage and lap length are included in the finished rate). |
| 13 | First class Fly Ash Brick work in cement mortar (1:6) in foundation &plinth with best quality bricks having crushing strength from 75KG/cm2 to 99Kg/cm/2, immersing the bricks in water for not less than 6 hours before use (the bricks shall well brunt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck ) includes moulding, chamfering, corbelling etc. complete as per drawing design and specification, watering and curing for 7 days including cost, conveyance, royality and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 14 | First class Fly Ash Brick work in cement mortar (1:6) in super structure with best quality bricks having crushing strength from 75KG/cm2 to 99Kg/cm/2, immersing the bricks in water for not less than 6 hours before use (the bricks shall well brunt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck ) includes moulding, chamfering, corbelling etc. complete as per drawing design and specification, watering and curing for 7 days including cost, conveyance, royality and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 15 | First class Fly Ash Brick work in cement mortar (1:4) in super structure with best quality bricks having crushing strength from 75KG/cm2 to 99Kg/cm/2, immersing the bricks in water for not less than 6 hours before use (the bricks shall well brunt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck ) includes moulding, chamfering, corbelling etc. complete as per drawing design and specification, watering and curing for 7 days including cost, conveyance, royality and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 16 | Providing & laying cement concrete of prop. (1:2:4) in foundation bed and floors using 12mm nominal size down graded, screened, washed hard black crusher broken granite Chips of approved quality & from approved quarry including laying in the layers not exceeding 150 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 17 | Providing 2.50cm thick Grading concrete with C.C(1:2:2) on roof slab using 6mm size down graded CBHG chips including conveyance, royality ,taxes of all materials and labour, T&P etc. all complete as per direction of Engineer-in-charge. |
| 18 | Providing 6 mm thick cement plaster (1:4) on RCC surface finished smooth including closed deep chiping and slury treatment as per specification drawing (inclusive of all cost of Materials, Labou,, conveyance, taxes, loading and unloading) labour, T&P and direction of the Engineer-in-charge |
| 19 | Providing 12mm thick cement plaster (1:6) over brick work including cost, conveyance & royalty of all materilas etc. |
| 20 | Providing 16mm thick cement plaster (1:6) over brick work including cost, conveyance & royalty of all materilas etc. |
| 21 | 12mm Thick Cement Plaster in Prop.(1:4) with neat Cement Punning including cost conveyances etc. complete and as per design & specification. |
| 22 | Supplying all materials,labour and T&P for fitting & fixing of WPC doors including cost of materal and labour etc all complete as per specification. including cost conveyances of all materials, cost labour, T&P etc. complete and as per the design & specification . |
| 23 | Fixing Tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with Antiskid Floor Tile - (Size-300mmX300mm) as per direction of Engineer in Charge. |
| 24 | Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with Digital Wall Tile - (Size-300mmX400mm) as per direction of Engineer in Charge. |
| 25 | Supplying fitting and fixing Marble on Wall as per specification etc. |
| 26 | Supplying fitting and fixing Pre cast RCC Jally on ventilator 2.5cm thick to 5cm thick incl. all cost conveyance etc. complete. |
| 27 | Cement washing two coat on plaster surface including watering curring etc. Complete. |
| 28 | Providing Plastic Paint two coat with approved quality and shadeon one coat of Primer over piastered surface with brush including cleaning the surface watering curing ,cost of paint ,taxes,labour charges T & p etc complete as per the direction of engineer in charge. |
| 29 | Providing Weather Seal coat Paint two coat with approved quality and shadeon one coat of Primer over piastered surface with brush including cleaning the surface watering curing ,cost of paint ,taxes,labour charges T & p etc complete as per the direction of engineer in charge. |
| 30 | Providing , supplying of all labour with T&P for wall painting / Mural displaying logo for art of different image & drawaing in wall surface with weather coat over a coat of primer incluidng cleaning the exhisting surface with cost & conveyance of all materials etc. |
| 31 | Providing & laying of 80mm thick Factory made cement concrete Interlocking Paver block of M35 grade concrete & of approved variety in colour & size made by block making machine with strong Vibratory compaction of approved design & shape , laidin required colour & pattern over 50mm thick compacted bed of course sand , filling with joints with sand etc. all complete including cost, coveyance & royalty of all materials etc as per working drawing and design specified by the consultant. |
| 32 | Providing & laying of 60mm thick Factory made cement concrete Interlocking Paver block of M35 grade concrete & of approved variety in colour & size made by block making machine with strong Vibratory compaction of approved design & shape , laidin required colour & pattern over 50mm thick compacted bed of course sand , filling with joints with sand etc. all complete including cost, coveyance & royalty of all materials etc as per working drawing and design specified by the consultant. |
| 33 | Fixing Kota Stone Above 0.10sqm. ( 16mm. Thick) in floors (Fixing Kota Stone on floors on 25mm. thick bed of CM (1:1) jointed with cement slurry including cost of Kota Stone etc. |
| 34 | Fixing Vertified Tiles s on 25mm. thick bed of CM (1:1) jointed with cement slurry Including cost of Vertified Tile, Labour,T&P etc. |
| 35 | Iron work wrought and put up in trusses and record racks(labour only). |
| 36 | Fitting & fixing G.C.I. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties including cost of materials ,labour for fixing etc all complete. |
| 37 | Transportation of Debris and surplus earth and debris by mechanical means within a lead of 5km. Including loading & unloading charges with all cost of materials, labour and T&P required for the work etc. complete. |
| 38 | Painting Two Coats to New Iron Work With S.E Paint Over a Coat of Redoxide Primer including cost conveyances etc. complete and as per the design & specification. |
| 39 | Supplying fiting and fixzing glow Sign Board with Sinage as per direction of Engineer in charge. |
| 40 | Cutting Hole in 250mm to 375mm thick Brick Wall for taking G.I./PVC Pipe and mendig good to damages after completion of Work etc. Complete. |
| 41 | Cutting Hole in 250mm to 375mm thick Brick Wall for taking 110mm/160mm dia PVC Pipe and mendig good to damages after completion of Work etc. Complete. |
| 42 | Cutting Groove on Brick Wall for taking Water Supply Pipe line and mendig good to damages after completion of Work etc. Complete. |
| 43 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.15mm dia G.I. Pipe (18622 ) |
| 44 | 20mm dia PVC Pipe ( 18972) |
| 45 | 25mm dia PVC Pipe (18974) |
| 46 | 40mm dia PVC Pipe (19026) |
| 47 | 25mm dia G.M. F.W.V. ( 21765) |
| 48 | 40mm dia G.M. F.W.V. ( 21801) |
| 49 | Suplying all labour and T&P for fitting & fixing the following Toilet fittings and Toilet fittings as per P.H. Specification etc. Complete.15mm C.P. Bib- Cock(Plaza) (21437) |
| 50 | 15mm C.P. Long Body- Bib Cock |
| 51 | C. P. Flange |
| 52 | 15 mm CP 2 in 1 Angle stop cock (Prayag). |
| 53 | 15 mm CP 2 in 1 Bib cock . |
| 54 | CP Health Foucet with 1.0 mtr PVC Tube |
| 55 | 15mm C.p. Angle Stop Cock |
| 56 | 15mm dia c.p concealed stop cock |
| 57 | C.P.soap holder/disc. |
| 58 | C.P. glass self with glass |
| 59 | Frammed Mirrior |
| 60 | 15mm dia c.p. swan neck Pillar cock with spout |
| 61 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) |
| 62 | Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification. |
| 63 | 10 litr pvc low level cistern with fittings |
| 64 | 32 mm PVC long flush bend |
| 65 | 15mmx600mm PVC connection pipe |
| 66 | Basin Bracket in pair |
| 67 | CP Health Foucet with 1.0 mtr PVC Tube |
| 68 | C.P. waste. (32mm -5\\" long) |
| 69 | C.P. waste. (40mm-5\\") |
| 70 | C.P. extension piece-3\\" |
| 71 | 32mmx 1150mm long PVC waste pipe |
| 72 | 40mmx1150mm long PVC corrugated waste pipe |
| 73 | Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.White vitreous china clay half stall urinal flat back 580x380x350 mm(Magnum type) |
| 74 | Fixing glazed earthenware squatting plate of size 600mmx350mm conforming to IS 2556 : Part 6-1995 with intigral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard grabnite metal etc all complete as per specification. |
| 75 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 76 | Fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings |
| 77 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion etc. Comlplete. 110 mm OD P.V.C. SWR D/S Pipe (ISI type-B) |
| 78 | 110mm dia SWR P' Trap |
| 79 | 110 mm dia P.V.C. SWR Vent Cowl |
| 80 | 110mm diaP.V.C. SWR door bend 87.5' |
| 81 | 110 x 110 x 110mm dia PVC SWR Tee |
| 82 | 110mm dia P.V.C. SWR D/J with door |
| 83 | 110mm diaP.V.C. SWR.pipe clip |
| 84 | Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification etc. 580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan |
| 85 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge |
| 86 | Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. |
| 87 | Supplying all materials, labour and T&P for construction of Construction of Man Hole Chamber-(1.20mx0.90m) as per P.H. specification and design all complete. |
| 88 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with Precast RCC Well Ring of size 1200mm dia x300mmhtx50mm thick walling up to 1.50mtr. height inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 89 | Supplying all materials , labour T&P and setting of boring equipments including Errection of suitable staging for Installation of required size of required T/W , dismentalling and removing the same after completion of the said work including transportaion of the boring equipments cleaning and levelling the site properly as per requirement excavation of the mud pit, channel etc. in all respect as per the direction of the Engineering in-Charge. (29308) |
| 90 | Supplying all labour, tools and plants and transporting boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement bentonite and gravels etc to work sites including loading and unloading etc. complete as per the direction of the Engineer-in-charge Convetance( Bulky materials like Machineries, Generators, Concrete Pipe & Furniture etc. (per Truck) |
| 91 | Supplying all labour and T&P for Drilling the Pilot bore not less than 102mm dia without casing pipe in all kinds of soil and rocks for the following depth including the supplying of necessary boring pipe and cutting equipments extra sockets ( whenever required ) etc. and withdrwing the boring pipes washing and keeping the the bore clear and logging if required complete in all respect as per direction of the Engineering in-Charge. |
| 92 | Supplying all labour and T&P for Lowering the 300mm dia Casing pipe fitting and fixing in possition and removing the same after completion of work etc. Complete in all respect as per direction of the Engineering in-Charge. |
| 93 | Supplying all labour and T&P for reaming the Pilot bore to the following sizes and depths without casing pipes including with drawing the boring pipes , washing the bore by means to pipe cylinder etc. Complete in all respect as per direction of the Engineering in-Charge. Reaming 100mm dia to 150mm dia ( from 0.00mtr to 75.00 mtrs depth) |
| 94 | Reaming 150mm dia to 200mm dia ( from 0.00mtr to 75.00 mtrs depth) |
| 95 | Reaming 200mm dia to 250mm dia ( from 0.00mtr to 75.00 mtrs depth) |
| 96 | Reaming 250mm dia to 300mm dia ( from 0.00mtr to 75.00 mtrs depth) |
| 97 | Supplying all labour , T&P and jointing materials and lowering the PVC Casing Pipe ,well screens, Cutter plug fitted and fixed in proper possition and washing and cleaning the bore as per P.H. specification and direction of Engineer in-Charge.Lowering 150mm dia PVC Casing pipe (from 0mtr to 80.00 mtrs depth) |
| 98 | Supplying all labour and T&P and materials for Cleaning and Developing the Tube Well with Compressor continously washed till clean and adequate discharged is obtained from the Tunbe well including supply and use of necessary equipments and labour complete in all respect as per the direction of Engineer in-Charge. |
| 99 | Supplying all labour and T&P for packing the bore with Washed Gravel or River singles of required sizes ,around well screen and pipes as per specification and direction of Engineer in-Charge. |
| 100 | Collecting, supplying and stacking good Washed Gravel at work site as per specifcation and direction of Engineer in-Charge including all lead ad royality etc. Complete. |
| 101 | Labour for Supplying, fitting and fixing the following pipe and fittings as per P.H. Specification and directon of Engineer in-Charge.150mm dia PVC Well Screen |
| 102 | 100mm dia Cutter Plug |
| 103 | 100mmX 300mm dia G.I. Short piece |
| 104 | Cap Plug |
| 105 | 150mm dia PVC Pipe |
| 106 | Bentonite powder |
| 107 | Supplying ,installition and commissioning of 1HP Single phase 230 Volt 5oHz submerssible Pump set ( Max. Head-65mtrs, Min Head-39mtrs) suitable for 40mm dia out let etc. complete with transportation, T&P and labour charges as per directionn of Engineer in-Charge. |
| 108 | Supplying and laying of 1.5Sqmm PVC insulated PVC Sheathed twin core Multistrand water proofr Copper Flat Cable (Black) etc.complete with transportation, T&P and labour charges as per directionn of Engineer in-Charge. |
| 109 | Supplying and fixing of 40mm S.D. PVC Pipe etc.complete with transportation, T&P and labour charges as per directionn of Engineer in-Charge. |
| 110 | Supplying, Transporting ,Fitting & Fixing the following accessories as pe specification and direction of Engineer in-Charge. Water Proof Tochen Rope |
| 111 | Tochen Clip |
| 112 | Steel Nipple |
| 113 | Steel Nut & Bolt |
| 114 | 1¼'' M.S. Clamp |
| 115 | Black Tap |
| 116 | M. Seal |
| 117 | 1¼'' dia G.I. Elbow |
| 118 | 1¼'' X 6'' Short Piece |
| 119 | 200mm dia Bore cover Please Enable Macros to View BoQ information |
