|
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.. All kinds of soil : |
| 2 | Earth work in excavation in foundation trenches or drains including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50M from edge of cutting. |
| 3 | Providing and laying Stone solling including compacting, watering excluding all carriages of material complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 fine sand: 4 grade stone aggregate 20mm nominal size) |
| 9 | Centering and shuttering including strutting propping etc. removal of form work in Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Centering and shuttering including strutting propping etc. removal of form work in Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | Centering and shuttering including strutting propping etc. removal of form work in Suspended floors, roofs, landings, balconies and access platforms |
| 12 | Centering and shuttering including strutting propping etc. removal of form work in Stairs (excluding landings) except spiral staircases. |
| 13 | Centering and shuttering including strutting propping etc. removal of form work in Edge of Slabs |
| 14 | Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete. |
| 15 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 16 | Providing and laying Sand filling of including all carriages of material complete. |
| 17 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in In cement mortar 1 cement: 6 fine sand mortar. |
| 18 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 19 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in . In cement mortar 1cement: 4 fine sand mortar. |
| 20 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 21 | Providing and Laying of 40mm thick concrete flooring in rooms in M-15 (1:2:4) nominal mix (max size of aggregate 20mm) concrete. |
| 22 | Providing and applying average 12 mm thk cement plaster in single coat incement sand mortar 1:6 to all surfaces at all levels including surface preparation, staging, scaffolding as directed. |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 25 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade 18mm thick |
| 26 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 27 | Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. |
| 28 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 29 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1mm thick |
| 30 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 31 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood |
| 32 | Providing and Fixing of 40 x 5mm MS Hold Fast 40cm Long including fixing to frames embedded in cement concrete block in 1:3:6 Mic including all carraiges. |
| 33 | Providing and fixing 35mm Thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge First class kail wood |
| 34 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside rooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood |
| 35 | Providing and fixing glazed 35mm Thick shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws First class kail wood |
| 36 | Providing and fixing of 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood |
| 37 | Extra for using stainless steel grade 304 wire gauge with wire of dia. 0.5 mm instead of Galvanized M.S. Wire gauge with wire of dia. 0.63 mm for doors, windows and clerestory windows with necessary screws: (shutter area to be measured) |
| 38 | Providing and fixing 4mm thick float glass in glazed doors, windows and clerestory window shutters including cost of wooden beading complete job as per directions of Enginner in Charge. |
| 39 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 40 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 41 | Providing and fixing of the following Hardware fittings of approved make. |
| 42 | Brass Handle 12\\" Long |
| 43 | Brass Handle 9\\" Long |
| 44 | Aldrop 12\\" Long |
| 45 | Tower Bolt 9\\" Long |
| 46 | Tower Bolt 6\\" Long |
| 47 | Handle 6\\" mm |
| 48 | Providing and fixing of 10mm thick Ready made wooden Panneling in sofits including cost of Budloow Wood Frame Work 50 x 40mm Section @ 600mm c/c bothways including cost of screws, etc in Softs, walls, gables, etc complete as per directions of engineer in charge. |
| 49 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Phool |
| 50 | Providing and fixing of 12mm thick Ply Wood in ceiling for bas eof Khatambandi including the cost of frame work of Budloo Wood of 50mm x 50mmw @ 600mm C-C including cost of nails, screws complete job as per direction of Engineer In Charge. |
| 51 | Providing and fixing of Ornamental Wooden Cornice 35x 35mm of approved design and shape of 1st Class Budloo wood. |
| 52 | Providing and laying of Dry random rubble masonry with hard stone in foundation and plinth using quarry stone Inc. Carriage. |
| 53 | Construction of brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) , foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. Size 45 x 45 x 45cm deep including PVC manhole cover with frame. |
| 54 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 55 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 56 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 57 | Providing and fixing of PVC pipe (Type “B”) in proper gradient of approved make |
| 58 | 150mm Dia |
| 59 | 100mm Dia |
| 60 | 75mm Dia |
| 61 | 100mm Dia Plain Bend |
| 62 | 100mm Dia Plain Bend |
| 63 | 100mm Dia Plain Tee |
| 64 | 100mm Dia Door Bend |
| 65 | Reducer 100mm to 75mm |
| 66 | 75mm Dia Plain Bend |
| 67 | 75mm Dia Floor Trap |
| 68 | Providing and placing on terrace (at all floor levels) polythene water storage tank with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but excluding all fittings and the base support for tank |
| 69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc 20mm Nominal outer dia pipes |
| 70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc 25mm Nominal outer dia pipes |
| 71 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc 32mm nominal outer dia pipes |
| 72 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board Size: 510x1040mm bowl depth 250mm |
| 73 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 74 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 75 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 76 | Providing and fixing of Two in One Angle Valve of approved make including all accessories complete. |
| 77 | Providing and fixing of Wall Mixer of approved make including all accessories complete. |
| 78 | Providing and fixing of Health Fuacet with chain of approved make including all accessories complete. |
| 79 | Providing and fixing of CP Towel Rod 600mm Long of approved make including all accessories complete. |
| 80 | Providing and fixing of CP Soap Case of approved make including all accessories complete. |
| 81 | Providing and fixing of CP Connection 600mm-450mm long of approved make including all accessories complete. |
| 82 | Providing and fixing of CP Grating of approved make including all accessories complete. |
| 83 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge. |
| 84 | Providing and fixing of CP Cups of approved make including all accessories complete. |
| 85 | Providing and fixing of Stain less steel paper holder with stand of approved make including all accessories complete. |
| 86 | Providing and fixing of Stainless steel paddle operated dustbin of approved make including all accessories complete. |
| 87 | Providing and fixing of Water proof Autiomatic Hand Dryer Machine with durbale time 5 Sec, Voltage 200-240V 50 Hz, Wind Teperature 65C± 15C of approved make and design complete job including all accessories complete. |
| 88 | Providing and fixing of the 300mmx 300mm Exhaust Fan (Crompton Make) as per approved specifications, complete. |
| 89 | Providing and fixing of the 450mm x 450mm Exhaust Fan (Crompton Make) as per approved specifications, complete. |
| 90 | Providing and fixing of 50 Ltr water heater (geysers) of approved make including cost of dash fasteners with nuts and washers, complete. |
| 91 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 92 | Supply and laying of manhole frame and cover Cast Iron heavy duty (2'-0\\" x 2'-0\\") of specified design and dimensions as directed by Engineer In Charge. |
| 93 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 94 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 95 | Carriage of material by mechanical means incd. Loading unloading and stacking complete |
| 96 | Sand/Stone Agg for an avg. lead of 15km |
| 97 | Bricks for an avg. lead of 20km |
| 98 | Electrification |
| 99 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell lifeguard/Polycab green/ Finolex/ RR/eq. standard make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 100 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor ( Havell lifeguard/Polycab green/ Finolex/ RR/eq. standard make as desired by engineer incharge ) single core cable in surface/recessed medium class PVC conduit. |
| 101 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Leiva /ABB Tvisha make make.) |
| 102 | Wiring for lighting circuits/ 6- 10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor( Havell lifeguard/Polycab green/ Finolex/ RR/eq. standard make as desired by engineer incharge ) single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 103 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.) |
| 104 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 105 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell lifeguard/Polycab green/ Finolex/ RR/eq. standard make as desired by engineer incharge ), single core cable in surface/ recessed (cutting the wall and making good the same in case of recessed conduit ) medium class PVC conduit as required. |
| 106 | (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 107 | (d)2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 108 | ( b )4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 109 | (f) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 110 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete |
| 111 | Providing and fixing of 6-16mm Cu thimbles duly cramped at cable ends. |
| 112 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 113 | Supply installation testing and commissioning of Indicator of Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena make.) |
| 114 | Sub Head-2 - Fixtures and Fittings |
| 115 | Supply installation testing and commissioning of 18 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Housing and Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Helonix/Havell/ Wipro make / sample to be approved before installation.. |
| 116 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA /orient/Crompton make (Project series, sample to be approved before installation) |
| 117 | Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor roma plus/Legrand Mylinc /ABB Tivsha/schneider Livia /Havell Coral make. |
| 118 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections. |
| 119 | Sub Head-3 - Distribution system |
| 120 | Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board,( legrand/ Shinider/Hager make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) |
| 121 | 4 way, Double door ( 12+4) |
| 122 | 8 way, Double door ( 24+4) |
| 123 | Supplying and fixing of following rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. legrand / Schinider/ L&T ./equivalent make as directed by engineer incharge. |
| 124 | a) 6-32 Amp SP MCB |
| 125 | b) 40-63amp DP MCB |
| 126 | c) 40-63amp TPN MCB |
| 127 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 128 | Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by8- 10 SWG G.I wire with 1/2\\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. |
| 129 | S/L , testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 130 | a)70 sq.mm 3.5 core |
| 131 | b)50 sq.mm 3.5 core |
| 132 | Supplying,Installation,Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical |
| 133 | Supply installation testing and comm. of flood light 50 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell ( JETA QUANTO PLUS MONO 50 W) /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 134 | Supply, installation, mechanical erection, testing and commissioning of three phase 20 KVA diesel generator set KIRLOSKAR/Cummins/Mahindra /ASHOKA LEYLAND (CSH) make , IP 23, H-Class, turbo charged developing required BHP 1500 RPM under NTP with 10 % overloading factor, with microprocessor based digital display genset engine controller for monitoring, metering, protection, control system,residential exhaust Siliencer, with batteries,including required capacity of AMF Panel inbuilt including first fuel fill etc. conforming to latest Govt. Emission norms CPCB-4, ( Complete job). |
| 135 | Carrying out foundation of PCC type, cement concrete to be carried in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)in foundation of DG set etc including form work etc as required the job also includes supply and carriage etc of the requsite material upto the site. |
| 136 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 137 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 138 | Normal INCOMING: |
| 139 | a)160A 2P MCCB 25 KA including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make. |
| 140 | b) 4 No. of Aluminium Bus Bar of 200 Amp. |
| 141 | c)Digital meters and phase indicators -1 set. |
| 142 | d) onload Change over switch 100 Amp for generator.Front operated. |
| 143 | e) 4 No. of Aluminium Bus Bar of 200 Amp. |
| 144 | c)Digital meters and phase indicators -1 set. |
| 145 | Inverter Incommer |
| 146 | (a) 125 amp DP MCCB 10K Legrand/ Shinider/Semiens/ABB make. |
| 147 | (b) 200 Amp 2 strip bus bar |
| 148 | c)Digital meters and phase indicators -1 set. |
| 149 | OUTGOING: |
| 150 | a) 40-63amp DP MCB |
| 151 | b) 40-63amp TPN MCB |
| 152 | c) space for 12 way MCB's |
| 153 | Supply installation testing and comm.of invertor battery 150 AH/12 V Exide invatubular/ equivalent make. |
| 154 | Supply installation testing and commissioning of Sine Wave Inverter Capacity 5 KVA, Rated Power 4000 W,Supports Four battery,24 Month Warranty Safe for sensitive appliances with Sine wave out-put, Inverter should run heavy loads like AC, Geyser, Photocopiers, Auto over-load handling capacity Installation and maintenance friendly Offers high quality and reliable power back-up solution for office and homes ,MCB for protection from Input mains,Bypass switch for supplying output directly from grid in case of Home UPS fault.Noiseless Operations with the help of low harmonic distortion, Intuitive Display to easily understand status of mains availability, battery status, etc.Comprehensive protection against short-circuit, reverse polarity, battery over-charge, deep-discharge etc.Adaptive Battery charging control system technology (ABCC) ensures faster battery charging and enhances battery life by around 70%.Supports a wide battery range, i.e. Flat Plate, Tubular & VRLA (SMF).praffered make Luminous/ Microtek/Exide |
| 155 | Supply and fabrication of angle iron stand of Structural steel work in built up sections, and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 156 | Fire Hydrant System |
| 157 | Supply, Installation, Testing & Commissioning of Single headed, gunmetal ISI marked oblique pattern hydrant landing valve with 63 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with Gunmetal cap and GI chain, twist release type plug and all accessories as per IS:5290-1983 (Type 'A'). |
| 158 | Supply, Installation, Testing & Commissioning of First-Aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required: a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type-2 as per IS: 12585 & 15m length. b) 20 mm nominal internal dia gun metal globe valve & nozzle. c) Drum and brackets for fixing the equipments on wall. d) Connections from down comer with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 159 | SITC of 63 mm dia, 15m long non percolated rubberized fabric lined (RRL Type-A) hose pipe with 63 mm dia gunmetal male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A). |
| 160 | SITC of 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling. |
| 161 | Providing and Fixing standard Fireman's Axe with heavy insulated rubber handle conforming to IS: 926 complete. |
| 162 | Providing and Fixing Hose cabinet for internal fire hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 2 nos. 15m long hose, 1 No. branch pipe and one fireman's axe. The cabinet shall be painted with one coat of primer and finished stove enamelled \\"Fire Red\\", \\"Fire Hose\\" written on front including suitably mounted on a raised masonry platform as required (Approx 0.75mx0.6 mx 0.25 m). |
| 163 | SITC of 2-way 80 mm dia. MS Pipe for fire brigade connection of cast iron body with gunmetal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection 80mm dia flanged outlet with built in check valve for fire brigade connection to fire risers/hydrants including companion flanges including nuts, bolts & washers etc conforming to IS 904. |
| 164 | Supply, installation, testing & commissioning of Pressure Gauge with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 complete in all respects and of dial dia 150 mm. |
| 165 | Providing and Fixing of Pressure switch (for operation at 0-25kg/cm2) with required fittings and accessories complete in all respects. |
| 166 | INTERNAL PIPING: Supply, Installation, Testing & Commissioning of 'C' class heavy duty MS pipe conforming to IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc including cutting holes in brick or RCC walls/slabs and making good and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with one coat of primer with two or more coats of synthetic enamel paint of red shade complete with steel works as required:65mm Please Enable Macros to View BoQ information |
