Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all length and width , including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre), including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 3 | Stone filling under floor dry hand packed with hard stone of approved quality consolidated properly with hand or mechanical rammer or by hand durmoot to required level as per HPPWD specification 1990 (One thousand Nine hundred Ninety) volume-I including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 4 | Providing and laying in cement concrete grade 1:2:4 (one cement :two coarse sand :four graded stone aggreate) 20 mm(Twenty milimillter) norminal size grade excluding the cost of centering and shuttering upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 5 | Providing and laying in cement concrete grade 1:3:6 (one cement :three coarse sand :six graded stone aggreate) 20 mm(Twenty milimillter) norminal size grade excluding the cost of centering and shuttering upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 6 | Providing and laying in cement concrete grade 1:4:8 (one cement :four coarse sand :eight graded stone aggreate) 20 mm(Twenty milimillter) norminal size grade excluding the cost of centering and shuttering upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 7 | Providing and laying in cement concrete grade 1:5:10 (one cement :five coarse sand :ten graded stone aggreate) 20 mm(Twenty milimillter) norminal size grade excluding the cost of centering and shuttering upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 8 | Providing and laying damp-proof course 50mm ( Fifty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 20mm ( twenty Millimeter) nominal size including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 9 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government . |
| 10 | Random rubble mansory with hard stone in superstructure above plint level and upto floor level including levelling up with cement concrete 1:6:12 (one cement: six coarse sand: twelve graded stone aggregate 20mm(twenty millimeter nominal size) at window sills,ceiling level and the like cement mortar 1:6 (one cement :six coarse sand ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government . |
| 11 | Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 12 | Providing and laying in position machine batched and machine mixed design mix M-25 (Mix-Tweny five) grade cement concrete for reinforced cement concrete work, cement content as per approved design mix, including pumping of concreteusing to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 (Indian Standred Nine thousand one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge.“(Note :- Cement content considered in this item is @330 kg kg/cum (at the rate three hundred thirty kilogram per cubic meter).“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 13 | Providing and laying in position machine batched and machine mixed design mix M-25 (Mix-Tweny five) grade cement concrete for reinforced cement concrete work, cement content as per approved design mix, including pumping of concreteusing to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 (Indian Standred Nine thousand one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge.“(Note :- Cement content considered in this item is @330 kg kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 14 | Providing and laying M-20 (Mix-Twenty) design mix cement concrete and curing complete including the cost of framework for plain/reinforced concrete in retaining walls, breast walls, as per drawing and HP. PWD technical specifications including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 15 | Providing and laying in position reinforced cement concrete M20 (Mix-twenty) DESIGN MIX excluding the cost of centering, shuttring, finishing, and reinforcement in beams ,suspended floors, roof having slope up to 15 Degree( fifteen Degree ), Landing, balconies, shelves, chajjas, lintels, bands, plain, window sills,staircases and spiral staircases , etctra all work above plinth level upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form work for Shelves in cast situ including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 22 | Centering and shuttering including strutting, propping etcetra and removal of form work for Small lintels not exceeding 1.5 m (one point five metre) clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls Under 20 cm (twenty centimetre) wide . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . |
| 24 | Steel reinforcement (TATA /SAIL / JINDAL PANTHER/RINL) for R.C.C.(reinforced cement concrete) work including straightening, cutting, bending, placing in position and binding complete including cost of binding wire Complete from foundation level to all floor level Thermo-Mechanically Treated bars of grade Fe-500D(five hundred) or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 25 | Square rubble mansory with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement: six coarse sand: twelve graded stone aggregate 20mm(twenty millimeter nominal size) upto plinth level with : cement mortar 1:6 (one cement :six coarse including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 27 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 28 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one sand : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 29 | Providing and fixing 18 mm(eighteen millimter) thick Baroda marble having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations required size, approved shade, color and texture laid over 20mm (twenty millimter) thick base cement mortar 1:4( one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moudling and polishing to edges to give high gloes finish ecttra complete at all levels area of slab over 0.50 Sqmt. (zero point fifty square meter)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 30 | Extra for providing frosted glass panes 4mm( four millimeter) Thick instead of ordinary float glass panes doors 4mm( four millimeter) thick in doors, windows and clerestory window shutters. ( (area of opening for glass panes excluding portion inside rebate shall be measured) 5.5mm (five point five millimeter) thick instead of 4 mm (four millimeter ) thick including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 31 | Providing and fixing 20mm ( twenty millimeter ) dia chromium plated brass curtain rod having wall thickness of 1.25mm ( one point two five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC (Polyvinyl chloride) sleeves etcetra wherever necessary complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 32 | Providing and fixing M.S. (mild steel) grills of required patterns in wooden frames of windows etctra with M.S. (mild steel) Flats, square or round bars with round headed bolts and nuts or by screws.Fixed to openings /wooden frames with rawl plugs screws etctra as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 33 | Providing 40x5mm(Forty into five millimeter) flat iron hold 40cm (forty centimeter) long ISI(Indian Standards Institute) (indian standared institute) including fixing to frame with 10mm( ten Millimter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm(Thirty into ten into fifteen centimeter) 1:3:6 mix(one cement : Three Coarse sand : six graded stone aggregate 20mm (twenty Millimeter) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 34 | Providing and fixing oxidised M.S. (mild steel) casement stays (straight peg type) with necessary screws etc. complete.250 mm (two hundred fifty millimete) weighing not less than 150 gms (one fifty gram) complete upto all floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 35 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with ISI (Indian Standard Institution), IS : 3564, (Indian standard :Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeter to one thousand millimeter)), with double speed adjustment with necessary accessories and screws etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 36 | Providing and fixing bright finished brass 100 mm (hundred millimeter)mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc.complete upto all floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 37 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete upto all floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 38 | Providing and fixing 300x16mm (Three hundred into sixteen millimetre) nominal size aluminium sliding door bolts, ISI(Indian Standards Institute) marked anodised (anodic coating not less than grade AC 10 as per IS : 1868(Indian Standred one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 39 | Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) nominal size aluminium sliding door bolts, ISI(Indian Standards Institute) marked anodised (anodic coating not less than grade AC 10 as per IS : 1868(Indian Standred one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 40 | Providing and fixing 250x10mm (Two hundred fifty into ten millimetre) nominal size aluminium tower bolts, ISI(Indian Standards Institute) marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 (Indian standred one thousand eight hundred sixty eight ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 41 | Providing and fixing 200x10mm (one hundred fifty into ten millimetre) nominal size aluminium tower bolts, ISI(Indian Standards Institute) marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 (Indian standred one thousand eight hundred sixty eight ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 42 | Providng and fixing 125mm ( one hundred twenty five millimeter) aluminium handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etctra. Complete: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 43 | Providng and fixing 100mm ( one hundred millimeter) aluminium handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etctra. Complete: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 44 | Providing and fixing aluminium hanging floor door stopper.ISI(Indian Standards Institute) marked, anodised (anodic coating not less then grade AC 10(ten) as per IS :1868 (indian standard one thousand eight hundred sixty eight ) transparent or dyed torequired coluor and shade,with necessary screws etctra complete. Twin rubber stopper including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 45 | Providing and fixing power coated aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of pproved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including least angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 46 | Providing and fixing 12 mm (Twelve millimeter) thick prelaminated board both side BWP phenol bounded shutter i/c bright finished / black enamelled iron butt hinges with screws. 40 mm (Forty millimeter) thick frame including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 47 | Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm (twenty five into twenty five into five millimeter) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm( twenty five into twenty five millimeter) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm(two point five millimeter) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 48 | Providing and fixing 19mm (ninteen millimetre) thick waterproof termite resistant commercial board shutters ply bonded Action TESA / Green Ply/ Kit Ply/ Century Ply make of ISI (Indian Standards Institute) Marked IS-1659 (Indian Standard - one thousand six hundred fifty nine) of uniply, green ply shutter and shelves box including vertical portion and shelves. The back side of cupboard/cabinet work shell have 6mm (six millimetre) thick water proof ply and all cut portion sheel be finished with 6/12mm (six oblique twelve millimetre) thick hard wood edging including all wood work of cubboard and cabinets from finished with synthentic enamel paint of approved shade and sample etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 49 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 50 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm(fifteen into three millimeter) and nuts & bolts complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 51 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 52 | Structural steel work(TATA/SAIL/Apollo/JSW Make ) welded in single / built up section, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.In trusses and trussed purlins in building including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 53 | Providing and fixing M.S. fan clamp type I or II of 16mm(sixteen millimetre) dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standrad design complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 54 | Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 55 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm (ninteen into ninteen millimeter) square bar with a clear height of 85cm (eighty five centimeter) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm (forty into six millimeter) size complete with a applying priming coat of red lead paint as per drawing specification and as per direction of Engineer-in-charge complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 56 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm complete upto all floors including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.“a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc complete upto all floors including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 58 | Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre complete upto all floors including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 59 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab complete upto all floors including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 60 | Providing and laying 10mm thick antiskid double charged vitrified floor tiles of size 600x600x10 mm (six hundred into six hundred into ten millimeter) (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm (at the rate three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etc., complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 61 | Providing and laying Vitrified tiles in sizes 600X600 mm (six hundred into six hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make, Nitco /Kajaria / Simpolo /Johnson / Somany in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimeter)thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joint with white cement & matching pigments etc. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 62 | Providing and laying Size of Tile 300x300 mm(three hundred into thre hundred millimeter) full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zer eight percent) and conforming to IS: 15622,(indian standard:fifteen thousand six hundred twenty two) of approved make NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON , in all colours and shades, laid on 20mm(twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three killogram per square meter) including grouting the joints with white cement and matching pigments etc., complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 63 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :15622 (Indian Standard: fifteen thousand six hundred twenty two)(thickness to be specified by the manufacturer ) of approved make NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square meter) including pointing in white cement mixed with pigment of matching shade complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 64 | Providing and laying Ist (first) quality Acid and alkali resistant wall tiles size 600x1200 mm (Six hundered into one thousand two hundered millimetre) of Kajaria / NITCO / Somany / Simpolo/ Johnson conforming to IS: 15622 , in all colours, shades except burgundy, bottle green, black in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram Per square metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 65 | Providing and fixing 75mm ( one hundred ten millimetre) dia Single socketed pipes of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standrad:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382,(indian standrad:five thousand three hundred ninty two) leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 66 | Providing and fixing 110mm ( one hundred ten millimetre) dia Single socketed pipes of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standrad:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382,(indian standrad:five thousand three hundred ninty two) leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 67 | Providing and fixing coupler 110mm(One hundred ten Millimeter) Size Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 68 | Providing and fixing Single Pushfit Coupler 110mm (One Hundred ten Millimeter) dia Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 69 | Providing and fixing Bend 110mm(One hundred ten Millimeter) dia Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 70 | Providing and fixing 0.60mm (zero point six zero millimeters) thick prepainted galvanized sheet of tata/sail/jindal steel in roofing with hot dipped metallic zinc coated sheet with top of regular modified polyster RNP organic coating of 20 (twenty) microns over 5(five) microns primer coating to back coat of polyster of 5 (five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeters) dia meter with prepainted limpet and rubber washers complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 71 | Providing and fixing ridges or hips of tata/sail/reliance/jindal steel 90cm(ninety centimeters) over all with 0.60mm (zero point six zero millimeters) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20(twenty) microns over 5(five) microns primer coating plus back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J and L hooks, bolts and nuts 6mm (six millimeters) dia and prepainted G.I. limpets and bitumen washers complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 72 | Providing and fixing valley of tata/sail/reliance/jindal steel 90cm (ninety centimeters) overall 0.60mm (zero point six zero millimeters) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5(five) microns primer coating including fixing with prepainted irons J or L hooks, bolts and nuts 6mm (six millimeters) dia with prepainted G.I. limpet and bitumen washers complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 73 | Providing and fixing, 15cm.( fifteen centimeter) Wide 45cm.( Forty five centimeter) Overall semi-circular plain G.I sheet gutters with iron brackets, 40x3(Forty into three) milimetre size bolts and nuts and washer etcetera including making necessaary connections with rain-water pipe complete as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 74 | Providing and fixing MS B.P. sheet 1.66mm to 2mm (one point six six millimeters into two millimeters) thick of tata/sail/reliance/jindal in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete up to all heights as per the instruction of Engineer-in-charge (base members of steel work shall be measured and paid separately), as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 75 | 15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:4 ( one cement : four Fine sand) complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 76 | 15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 ( one cement : six Fine sand) complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 77 | 6 mm cement plaster of mix :1:3 (one cement : three fine sand) in walls and ceiling wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 78 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero litre per ten square) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eight zero litre per ten square meter)of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 79 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero litre per ten square) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eight zero litre per ten square meter)of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 80 | Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 1 mm ( One millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 81 | Finishing walls with 100%(Hundred percent) Premium acrylic emulsion paint having VOC less than 50(fifty) gm/litre and UV resistance as per IS 15489:2004(indian standard fifteen thousand four hundred eighty nine : two thousand four), Alkali & fungal resistance, dirt resistance exterior paint (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @1.43 litre/ 10 sqm(One point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point ninty litre per ten square metre)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 82 | Distempering with oil bound washable distemper of approved brand (ASIAN / NEROLAC / Berger ) and manufacture to give an even shade : New work (two or more coats) over including and water thinnable primming coat with cement primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 83 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm( three point eighty four kilogram per ten square meter)complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 84 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :1:1½:3 (one cement : one point five coarse sand) : Three graded stone aggregate 20 mm (twenty millimeter) nominal size) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 85 | Providing and laying factory made 60mm (sixty millimeter) thick cement concrete paver block of M-30 (mix thirty ) grade with approved colour, design & pattern chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm (fifty millimeter) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 86 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm (zero point fifty five millimetre) thick) having a knurled web of 51.55 mm (fifty one point fifty five millimetre) and two flanges of 26 mm (twenty six millimetre) each with lips of 10.55 mm (ten point fifty five millimetre), placed @ 610 mm C/C (at the rate six hundred ten millimetre centre to centre) in perimetre channel having one flange of 20 mm (twenty millimetre) and another flange of 30 mm (thirty millimetre) with thickness of 0.55 mm (zero point fifty millimetre) and web of length 27 mm (twenty seven millimetre). Perimetre channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C (at the rate six hundred ten centre to centre) with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm (twenty millimetre) countersunk ribbed head screws @ 200 mm C/C (at the rate two hundred millimetre centre to centre) all complete as per the drawing and directions of Engineer-in-Charge, the joints of the boards are finished with specially formulated jointing with GRC Cladding of Unistone complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 87 | Construction coursed rubble hammer dressed U shaped openm surface drain with side wall 15X23 cm(fifteen into twenty three centimeter) in cement moratr 1:6 (One cement:six coarse sand ) and inside plastering with cement mortar 1:3 (one cement : three fine sand) including earth work and laying 10cm(ten centimeter) concerete 1:2:4 (one cement:two approved sand : four graded crushed stone aggregate of 20mm(twenty millimter nominal size) and finished with a floating coat of neat cement complete as per standard design. complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 88 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i)Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofingcompound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii)IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixedwith water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii)IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area.(iv)IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheetshould be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 89 | Constructing soak pit 1.20x1.20x1.20 m (one point two zero into one point two zero into one point two zero meter)filled with brickbats including S.W.drain pipe 100 mm(hundred millimeter) diameter and 1.20m(one point two zero meter) long complete as per standard. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 90 | Providing and fixing cowl 110mm ( one hundred ten millimetre) dia including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 91 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality LD-2.5(two point five) circular shape 450 mm (four fifty millimeter)internal diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 92 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:5:10 (one cement : five coarse sand) : ten graded stone aggregate 40 mm(fourty millimeter) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 93 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 94 | Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and M.O.R.D. technical specifications clause 1204.3.8 (one thousand two hundred four point three point eight) as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 95 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m(one point five meter), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( twenty centimeter) in depth, including consolidating each deposited layer by ramming, watering, etc.and disposing of surplus excavated soil as directed, within a lead of 50 m(fifty meter) : Pipes, cables etc, not exceeding 80 mm(eighty millimeter) dia. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 96 | Providing and fixing white vitreous china pedestal type water closet (European type of CERA,HINDWARE,PARRYWARE, make) with soft closing seat and lid, 10 (ten) litre low level white vitreous china flushing cistern CERA,HINDWARE,PARRYWARE make)and C.P. flush bend with fittings and C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 97 | Providing and fixing Stainless Steel A ISI 304 (Indian standard Institute three hundread four) (18/8 (Eighteen/ Eight)(Indian standard institute) kitchen sink as per IS: 13983(Indian standard Thirteen thousand nine hundred eighty three) with C.I. brackets and stainless steel plug 40 mm (forty millimeter), including painting of fittings and brackets, cutting and making good the walls wherever required : 510X1040 mm (Five hundred ten into one thousand forty millimeter) bowl depth 250 mm (two hundred fifty millimtere) complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 98 | Providing an fixing wash basin (CERA, Parryware, Hindware, Sanitaryware) with C.I. brackets, 15 mm(fifteen millimeter) C.P. brass pillars taps ,32mm(thirty two millimeter) C.P. brass waste of standard pattern, including painting of fitting and brackets , cutting and making good the walls where ever required White vitreons China washbasin size 630X450 mm(six hundred thirty into four hundred fifty) with a pair of 15mm(fifteen millimeter) C.P. brass pillar tape including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 99 | Providing and fixing white vitreous china pedestal (CERA, Parryware, Hindware, Sanitaryware) for wash basin completely recessed at the back for the reception of pipes and fittings including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 100 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one point zero zeroo) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquare Opal series) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 101 | Providing and fixing 32mm (thirty two millimeter)dia P.V.C. (polyvinyl chloride)waste pipe for sink or wash basin including P.V.C. (polyvinyl chloride) waste fittings complete. Semi rigid pipe . complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 102 | Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) make of Atul,Modi Guard Golden Fish complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers completeof including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 103 | Providing and fixing 600 x 120 x 5mm ( six hundred into one hundred twenty into five milimetre ) glass shelf with edges round of supported on andoised aluminium angle frame C.P. brass bracket and guard rails complete fixed with 40mm(forty millimeter) long screws ,rawl plugs etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 104 | Providing and fixing Chrome Plated brass toilet paper holder (CERA, Parryware, Hindware, Sanitaryware) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 105 | Providing and fixing 110mm(one hundred ten millimeter) dia. high pressure Poly Vinyl Chloride spigot and socket, waste and ventilating pipes ISI (Indian standard Institute) marked including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 106 | Providing and fixing 75mm(seventy five millimeter) dia high pressure Poly Vinyl Chloride spigot and socket, waste and ventilating pipes ISI (Indian standard Institute) marked including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 107 | Providing and fixing 110mm(one hundred ten millimeter) dia Poly Vinyl Chloride Clamps ISI (Indian standard Institute) marked of adhesive design with steel screws and rawl plugs etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 108 | Providing and fixing 75mm(seventy five millimeter) dia Poly Vinyl Chloride Clamps ISI (Indian standard Institute) marked of adhesive design with steel screws and rawl plugs etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 109 | Providing and fixing 110mm(one hundred ten millimeter) dia PVC(Polyvinyl chloride) single equal branch with oval access door, ISI(Indian Standards Institute) marked insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 110 | Providing and fixing 75mm(seventy five millimeter) dia PVC(Polyvinyl chloride) single equal branch with oval access door, ISI(Indian Standards Institute) marked insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 111 | Providing and fixing 110mm(one hundred ten millimeter) dia. PVC(Polyvinyl chloride) double equal branch plain , ISI(Indian Standards Institute) marked insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 112 | 75mm(seventy five millimeter) dia. Providing and fixing 75mm(seventy five millimeter) dia PVC(Polyvinyl chloride) double equal branch plain , ISI(Indian Standards Institute) marked insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 113 | Providing and fixing 110mm(one hundred ten millimeter) dia. PVC (Polyvinyl chloride)(Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(tree millimeter) thick bolts and nuts ISI(Indian Standards Institute)(Indian Standards Institute) marked complete including fixing with aprooved adhesive etc. . complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 114 | Providing and fixing 75mm(seventy five millimeter) dia PVC (Polyvinyl chloride)(Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(tree millimeter) thick bolts and nuts ISI(Indian Standards Institute)(Indian Standards Institute) marked complete including fixing with aprooved adhesive etc. . complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 115 | Providng and fixing 110mm(one hundred ten millimeter) dia. PVC (Polyvinyl chloride) collar ISI(Indian Standards Institute.) marked including fixing with approved adhesive etc. complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 116 | Providng and fixing 75mm(seventy five millimeter) dia PVC (Polyvinyl chloride) collar ISI(Indian Standards Institute.) marked including fixing with approved adhesive etc. complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 117 | Providing and fixing110mm (one hundred ten millimeter)x 75mm(seventy five milimeter) PVC (Polyvinyl chloride)(Polyvinyl chloride) floor trap or self cleaning design including fixed with apprssev adhesive cost of cutting and marking good the walk and floor etctera complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 118 | Providing and fixing 600 mm (six hundred millimeter) long towel rail with total length of 645 mm,(six hundred fourty five millimeter) width 78 mm(seventy eight millimeter) and effective height of 88 mm,(eighty eigth millimeter) weighing not less than 190 gms.(one hundred ninty grams) PTMT (Poly tertra MethyleneTerephthalate ) towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. including necessary plaster and pointing in cement mortar 1:4 (one cement : four coarse sand) : including cost of cutting and making good the walls and floors : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 119 | Providing and fixing 1216 (16mm OD ) pipe(one thousand two hundred sixteen) (sixteen millimeter outer diameter.) Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 120 | Providing and fixing 1620 (20 mm OD ) pipe(one thousand six hundred twenty) (twenty millimeter outer diameter.) Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 121 | Providing and fixing 15mm(fifteen millimeter) dia. nominal bore G.I. (Galvanized Iron ) pipes complete with G.I. (Galvanized Iron ) fitting including trenchand refilling etc.External Work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 122 | Providing and fixing 20 mm(twenty millimeter) nominal bore nominal bore G.I. (Galvanized Iron ) pipes complete with G.I. (Galvanized Iron ) fitting including trenchand refilling etc.External Work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 123 | Making connection of G.I(Galvanized Iron ) distribution branch with G.I. (Galvanized Iron ) main 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes etc cera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 124 | Fixing water meter and stop cock 200 mm(two hundred millimeter) nominal bore in G.I. (Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etc. complete ( cost of water meter and stop stop cock to be paid seprately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 125 | Providing and fixing 20 mm nominal bore (twenty millimetre) nominal bore size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal /Tata make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 126 | Providing and fixing 25mm (twentyfive millimetre) nominal bore size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal /Tata make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 127 | Providing and fixing uplasticised PVC (Polyvinyl chloride) connection pipe with brass unions 45cm ( forty five centimetre ) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / hindware Make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 128 | Construction of chamber 300mm x300mmx500mm (three hundred millimeter into three hundred millimeter into five hundred millimeter) inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (one hundred millimeter into hundred millimeter into seventy five millimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two sand four graded stone aggregate 20mm (twnety millimeter) nominal size) 75mm (seventy five millimeter) thick foundation concrete 1:5:10 (one cement : five sand : ten grades stone aggregate 40 mm (fourty millimeter) nominal size) and inside plastering with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement including curing complete with 100mm (one hundred millimeter) thick wall of brick masonry in cement mortor 1:5 (one cement: five sand) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 129 | Providing and fixing 15 mm (fifteen millimeter) nominal boreG.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 130 | Providing and fixing 20 mm (twenty millimeter) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 131 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701(indian standard:Twelve thousand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 132 | Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chrome plated) brass bib cock of approved quality conforming to IS : 8931 (Indian standred : eight thousand nine hundred thirty one ) :15mm (fifteen millimeter) nominal bore complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 133 | Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chrome plated) brass bib long body bib cock of approved quality (Jaguar) conforming to IS (indian standard)standards and weighing not less than 810 gms (eight hundred ten grams)complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 134 | Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chrome plated) brass stop cock of approved quality (jaguar) conforming to IS : 8931.15 (Indian standred : eight thousand nine hundred thirty one point fifteen ) :15mm (fifteen millimeter) nominal bore complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 135 | Providing and fixing PTMT soap Dish Holder (Jaguar)having length of 138mm,(one hunndred thirty eight millimeter) breadth 102mm,(one hundred two millimeter) height of 75mm(seventy five millimeter) with concealed fitting arrangements, weighing not less than 106 gms. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 136 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate) 40 mm(forty millimeter) cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm nominal size(twenty)finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm (ninty into eighty centimeter) and 45 cm(fourty five centimeter) deep including C.I. (cast iron) cover with frame (light duty) 455x610mm (four hundred fiftyfive into six hundred ten millimeter) internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg(fifty eight killogram) and weight of frame 38 kg(thirty eight killogram) (weight of cover 23kg (twenty three kilogram) and weight of gram 15kg (fifteen kilogram)) : With Sewer bricks conforming to IS : 4885(indian standard:four thousand eight hundred eighty five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
