|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 3 | Dismantling of brickwork built in cement mortar of any description complete all as specified and directed. |
| 4 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 5 | M & L Cement Concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cmdeep and getting out in soft/loose soil complete all as specified and directed. |
| 7 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 8 | M & L for 50 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed. |
| 9 | M&L for 100mm thick Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate finished surface even & smooth without using extra cement complete all as specified and directed. |
| 10 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 11 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 12 | M & L for providing reinforced cement concrete M-25 (Design Mix), as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed. |
| 13 | M & L for providing reinforced cement concrete M-25 (Design Mix), as in columns, pillars, piers, posts, struts and the like complete all as specified and directed. |
| 14 | M & L for providing reinforced cement concrete M-25 (Design Mix), as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed. |
| 15 | M & L for providing reinforced cement concrete M-25 (Design Mix), as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed. |
| 16 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 17 | All as per item No 16 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 18 | M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed. |
| 19 | M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed. |
| 20 | M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. |
| 21 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed. |
| 22 | Material and labour for brick work with fly ash brick, straight or curved on plan exc. 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 23 | S&F Factory Made24mm thick 100% Solid WPC ( Wood polymer Composite ) JALI of required size comprising of virgin PVC resin of K Value 58-60 ( Suspension Grade), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made frorn Extrusion procdss WPC foam sheet Single Extruded ( Inner ) with having minimum densiff not less than 650 kglcbm, having good screw holding capacity (Screw With drawal strength of 2000N(Face) & 1100N (Edge),Minimum Compissive of 50Nlmm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC Jali to be fixed with stainless Steel butt hinges ( if required ) of required size with necessary full body threaded star headed counter sunk SS Screws. complete all as specified and directed.Note : Material test certificate and authentication shall be provided by the manufacturer. |
| 24 | M&L for rendering 15 mm thick in cement mortar 1:4 (10mm thick rendering in first layer and 5 mm thick rendering in second layer)on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed.Note : - Supply only water proofing compound shall be measured and paid for separately. |
| 25 | M&L for rendering 10mm thick in cement mortar 1:6 on fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 26 | Supply only integral water proofing compound, ISI Marked complete all as specified and directed. |
| 27 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified and directed. |
| 28 | M&L for complete removal of existing treatment of internal wall & external including filling depression of scraped surface complete all as specified and directed. |
| 29 | M&L for complete removal of existing treatment on old ceiling surface including filling depression of scraped surface complete all as specified and directed. |
| 30 | M&L for prepration of New plastered Internal wall surface complete applying the following :-(a) Applying two coat (1.5mm thick in each coat) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified(b) Applying one coat of internal Wall Primer by using Roller over complete all as specified(c) Applying two coat of interior Premium Emulsion by using Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 31 | M&L for prepration of New plastered External wall surface complete applying the following :-(a) Applying two coat (1.5mm thick in each coat) on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified(b) Applying one coat of Exterior Wall Primer by using Roller over complete all as specified(c) Applying two coat of Advcanced Dust Proof Emulsion using Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 32 | M&L for prepration of New plastered ceiling surface complete applying the following :-(a) M&L two coat (1.5mm thick in each coat) on ceiling surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified.(b) M&L two coat of interior acrylic emulsion over a coat of chalk whitening priming by using Airless spray / Roller over complete all as specified . |
| 33 | M& L for providing and fixing stainless steel (Grade 304) railing made of Square hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) & Providing baluster and necessary fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 34 | M&L for vitrified Double charged/Ultracharged ceremic tiles (square / rectangular) area of each tile (size 1200 X 600mm) exceeding 0.42sqm but not exceeding 1.0 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair complete all as specified and directed. |
| 35 | All as per Srl item No. 34 here in before but on vertical surfaces/skirting dados etc over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed. |
| 36 | Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 37 | S&F CPVC ISI SDR 11 pipes 20 mm dia with all fitting, including all Brass Fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed. |
| 38 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. In brick walls complete all as specified and directed. |
| 39 | Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 40 | S&F CPVC ISI SDR 11 pipes 25 mm dia with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and directed. |
| 41 | S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed. |
| 42 | S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed. |
| 43 | S&F hat pegs and hooks (cloth hanger with six peg set each) complete all as specified and directed. |
| 44 | S & F 1.50mtr x 600 mm size bevelled edge looking mirror of selected quality glass and fixed with chromium plated brass studs/screws and cup washers complete all as specified and directed. |
| 45 | S&F vitreous china premium/1st quality wash basin , white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed. |
| 46 | S&F white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device, brass chromium plated Jet shower with one meter long flexible pipe including all connection complete all as specified and directed. |
| 47 | S&F brass chromium plated jet spray fitting with chrome plated 1.5 mtr long extendable, flexible tube, fixed to EWC complete all as specified and directed. |
| 48 | S&F Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 49 | S & F PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed. |
| 50 | S & F stainless steel tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed. |
| 51 | S & F in stainless steel toiler paper holder fixed with screw/ necessary fittiings complete all as specified and directed. |
| 52 | S&F corner glass self 300mm ( withBrass Brackets) fixed with chromium plated screws etc complete all as specified and directed. |
| 53 | S&F 15 mm dia bore long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed. |
| 54 | S & F 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 55 | S&F CP two way bib tap for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed. |
| 56 | S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed. |
| 57 | S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm dia CPBrass waste fitting amd waste pipe overall size of SS sink 495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed. |
| 58 | S&F fancy 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure,fixed complete all as specified and directed. |
| 59 | Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 60 | M&L for 18 to 20 mm thick Granite (of any type) slab of approved shade as in kitchen platform,steps,jambs,pillars,window cills,cooking plateforms etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) over & including 25mm thick screed bed (bedding layer) in CM 1:4, complete all as specified and directed. |
| 61 | Dismantling water tanks of any description exc 500 and n.exc 1000 ltrs capacityand removal from site complete all as specified and directed. |
| 62 | S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed. |
| 63 | S&F 25 mm bore cpvc gate valve with handle, screwed both ends for inlet & outlet pipe and fixed complete all as specified and directed. |
| 64 | M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 65 | M&L for anti-skid ceramic joint free premium quality coloured tiles n.ex 0.16 Sqm 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 66 | M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed. |
| 67 | M&L for Writing letters or figures with fluorecent paint ( Block. Roman, Italic or Indian) n exc. 30 cm high etc complete all as specified and directed. |
| 68 | Dismentling wall paneling (fibre, pulp, insulation ,etc.) or insulation boards/panels/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 69 | S & F hollow laminated with coloured PVC Wall paneling/Lining con-sisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.(Note : Colour of paneling as approved by GE /Engr-in-charge) |
| 70 | S & F 5mm thick laminated with coloured PVC sheet fillet of width 35mm for wall paneling frame work inclusive of fixing on to wall to make PVC Frame as per specification and draw-ing complete all as specified and directed.. Note : - Colour of panneling as approved by GE/ Engr-in-charge. |
| 71 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed. Please Enable Macros to View BoQ information |
| 72 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed. Please Enable Macros to View BoQ information |
