|
| 1 | B/R WORKS: Dismantling Plain or corrugated Asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed. |
| 2 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 5 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed |
| 6 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 7 | M&L for 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulatedjointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed. |
| 8 | M&L for two coats of oil bound distemper (white or tinted as directed) on seamless ceiling over and including 1.5 mm thick wall care putty to make surface even and smooth including preparation of surface of ceiling complete all as specified and directed. |
| 9 | M&L for Anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling complete all as specified and directed. |
| 10 | M&L for 6 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed |
| 11 | S&F 5mm thick printed colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed. |
| 12 | S&F Anodised aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 13 | S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) complete all as specified and directed. |
| 14 | S&F 5.5 mm thick sheet glass ordinary quality and glazed with oil putty or fixed with beads in square exc 0.5 Sqm in each pane complete all as specified and directed. |
| 15 | S&F Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples size of mess 12 mm complete all as specified and directed. |
| 16 | S&F Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and directed |
| 17 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 complete all as specified and as directed |
| 18 | S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed |
| 19 | S&F Aluminium Handle 100 mm long cast type, anodised extruded fabricated type complete all as specified and directed. |
| 20 | S&F Aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed. |
| 21 | Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed |
| 22 | Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frames) complete all as specified and directed |
| 23 | S&F Aluminium (Extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 24 | M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 25 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed |
| 26 | M&L for light shade vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles exc 0.42 sqm but n exc 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed in CM 1:4 complete all as specified and directed. |
| 27 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick back coat of cement mortar in 1:4 complete all as specified and directed |
| 28 | M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 300X 7 mm thick over and including 10 mm thick back coat of cement mortar in 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and directed. |
| 29 | M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.38 sqm, in floor/wall etc laid over and including 15 mm thick screed bed or bedding layer of cement mortar in 1:4 set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed. |
| 30 | M&L for 20 mm thick Granite (of any type) work (table rubbled and polished) in steps, Jambs, Pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm screed in CM (1:3) complete all as specified and directed |
| 31 | Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed |
| 32 | S&F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good to match existing surface complete all as specified and directed |
| 33 | Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed |
| 34 | S&F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed. |
| 35 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 36 | M&L cement concrete 75mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling in proportion of Bitumen and sand (1:2) including necessary form work complete all as specified and directed. |
| 37 | M&L for preparing old decorated surfaces of walls by complete removal of existing treatment and applying two coats of distemper-oil-emulsion over a coat of primer over and including 1.5mm thick wall care putty to make the surface even and smooth complete all as specified and directed. |
| 38 | M&L for complete removal of existing treatment from walls by scrapping with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistant as per IS-15489:2004 alkali and fungal resistant exterior paint of required shed (company depot tinted) with silicon additives 1.43 litrs/ 10 Sqm over and including primer coat of exterior primer applied 0.90 litre/10 Sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories complete all as specified and directed. |
| 39 | Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 40 | M&L for Brickwork with subclass ‘B’ bricks well burnt, straight or curved on plan exc 6m mean radius built in cement mortar in 1:4 complete all as specified and directed |
| 41 | M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed. |
| 42 | M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 43 | Supply only Liquid water proofing compound complete all as specified and directed |
| 44 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 45 | M&L for Rolled sections of Fe-410- W(Gde- E-250) quality- B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed |
| 46 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (gde-E-250) quality -A complete all as specified and directed. |
| 47 | S&F Joist, channel, angle, or tee sections of Fe 290 (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed. |
| 48 | S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 49 | M&L for painting new steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over coat of red oxide primer including preparation of surface complete all as specified and directed |
| 50 | Demolition of PCC/RCC as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed |
| 51 | M&L for plain cement concrete type B-1 (1:2:4) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 52 | Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and directed |
| 53 | Supply, hoisting and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and directed. |
| 54 | S&F 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 55 | S&F for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 56 | S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 57 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed |
| 58 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 59 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed |
| 60 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed |
| 61 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed |
| 62 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed |
| 63 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed |
| 64 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for incl cutting of reinforcement to facilitate demolition complete all as specified and directed |
| 65 | M&L for RCC (nominal mix ) type B1 1:2:4 (20 mm graded aggregate) as in slab supported on wall beam and coloumn in floor roof landing balconies canopies deck slab and in shelves, etc complete all as specified and directed. |
| 66 | M&L for form work flats sides to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work ; exc 200 mm thick complete all as specified and directed. |
| 67 | M&L for Mild steel TMT bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 68 | M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 69 | Demolition of unreinforced cement concrete in any description and any position complete all as specified and directed |
| 70 | M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 71 | S&F for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 72 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 73 | S&F in repairs 15mm stop valves (concealed type), cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 74 | S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and directed. |
| 75 | S&F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 76 | M&L for Block Boards 18/19 mm thickness, grade 2 quality, interior grade, commercial type, with decorative face veneers on both faces; fixed with 7.5 cm long screws. |
| 77 | S & F Continuous (piano) of flaps 30 mm hinges, mild steel, bright finish or electro galvanised |
| 78 | Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed |
| 79 | M&L for Providing precast cement concrete louvres and jallies, type B0 1:2:4 (12.5 mm graded aggregate) as in 40mm thick (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid complete all as specified and directed. |
| 80 | M&L for preparing newly plastered/ concrete surfaces of walls, etc and applying three coats of white wash complete all as specified and directed. |
| 81 | S&F Counter top WHB vitreous china oval type overall size 560X400X205 mm coloured with brackets fitted on granite counter top complete all as specified and directed. Make : Cera Cat Part No S2030103 or equivalent make as specified in PS. |
| 82 | S&F health faucet hose and hook all complete all as specified and directed.Make : Parryware Cat Part No T-9937A1 or equivalent make as specified in PS. |
| 83 | S&F Parryware 15mm dia Two way Bib cock complete all as specified and directed.Make : Parryware Cat Part No G3034A1 or equivalent make as specified in PS. |
| 84 | S&F 15mm dia Angle Stop Cock with wall flange complete all as specified and directed. Make : Parryware Cat Part No G3034A1 or equivalent make as specified in PS |
| 85 | S&F Parryware Towel Ring complet all as specified and directed. Make : Parryware Cat Part No T6402A1 or equivalent make as specified in PS |
| 86 | S&F Corner self complete all as specified and directed.Make : Parryware Cat Part No T6010A1 or equivalent make as specified in PS |
| 87 | S&F Parryware Single piece white colour EWC Size 620x350x725mm complete all as specified and directed .Make : Parryware Cat Part No C8852 or equivalent make as specified in PS |
| 88 | S&F Parryware standard towel rack complete all as specified and directed.Make : Parryware Cat part No -T6008A1 or equivalent make as specified in PS. |
| 89 | S&F in repairs Basin Mixer without pop up all complete all as specified and directed. Make : Parryware Cat Part No G01114A1) or equivalent make as specified in PS. |
| 90 | S&F anodised aluminium door shutter frame work fabricated by using medium grade, Jindal Make box sections as per drgs. Door/partition panels shall be 8 mm thick plain select quality glass panes inserts, fixed with aluminium anodises glazings clips and rubber beading including all standard accessories. etc complete all as specified and directed.Note:- TD drawing CESZ/2015/TD-005 |
| 91 | M&L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed. |
| 92 | M&L for preparation of new plastered surface of walls etc and applying two coats of cement base paint over one coat alkali resistant priming paint complete all as specified and directed |
| 93 | E/M WORKS :Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed. |
| 94 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
| 95 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
