|
| 1 | Dismantling Plain or Corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern Roof covering. Complete all as specified and as directed. |
| 2 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws.Complete all as specified and as directed. |
| 3 | Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil.Complete all as specified and as directed. |
| 4 | Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 5 | Returning filling in including spreading leveling, watering and well ramming in layers not exc 25cm in Hard/dense soil all as specified and directed |
| 6 | Removing excavated material n .Exc. 50m and depositing where directed at a level n.exc 1.50m above the sarting point in soils.(this soil will be filled under floor area). |
| 7 | M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed |
| 8 | M&L for treating thebottom and sides of excavation surface at the rate of 5 ltr of emulsion per squre metre of surface.Complete all as specified and as directed. |
| 9 | M&L for treating the top surface of filled earth at the rate of 5 ltr of emulsion per squre metre of surface.Complete all as specified and as directed. |
| 10 | M&L for treating the soil under plinth prorection at the rate of 5 ltr of emulsion per squre metre of surface.Complete all as specified and as directed. |
| 11 | M&L Damp proof course 50 micron thick polythene over coat of blown bitumen 85/25 grade @ 1.50 Kg per Sqm over 40mm thick PCC 1:2:4 type B-0 with WPC in proportions to horizontal or vertical surfaces including necessary formwork as specified and directed. |
| 12 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified. |
| 13 | M&L for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified. |
| 14 | M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified. |
| 15 | M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter all as specified & all as directed. |
| 16 | M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape all as specified & as directed. |
| 17 | M&L flat form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc all as specified and directed. |
| 18 | M&L,flat rough finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc all as specified & all as directed |
| 19 | M&F formwork to rough finished surfaces of concrete of chullah hoods, chajjas, troughs and similar items including edges as specified and directed. |
| 20 | M&F Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete ailings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide as specified and directed. |
| 21 | M&L for RCC M-25 (Design mix) (20mm graded stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, all as specified and directed. |
| 22 | M&L for RCC M-25 (Design mix) (20mm graded aggregate) for columns, pillars, pierrs, posts & struts etc all as specified and directed. |
| 23 | M&L for RCC Design Mix M-25 (20mm graded aggregate) for beams cantilevers bressumers, lintels over 1.5m span etc all as specified and directed. |
| 24 | M&L for RCC design mix M-25 (20mm graded aggregate) as in chajjas all as specified and directed. |
| 25 | M&L for RCC Design mix M-25 (20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc all as specified and directed. |
| 26 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed. |
| 27 | M&L brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in CM 1:6.Complete all as specified and as directed. |
| 28 | M&L for brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 29 | M&L rendering 15 mm thick 1:6 on surfaces other than fair faces of brick work or concrete surface surface finsihed even and smooth without using extra cement. Complete all as specified and directed. |
| 30 | M&L for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge. Note :- WPC measured and paid separetely. |
| 31 | M&L rendering 5 mm thick in CM 1:3 on ceiling surface, surface finsihed even and smooth without using extra cement.Complete all as specified and as directed. |
| 32 | Supply only integral water proofing compound.Complete all as specified and as directed. |
| 33 | Taking down cement or cement lime plaster any description, on brick or stone walls including chhajja of any floor and roof projection etc including raking out joints, hacking for key, scrubbing down with water etc.Complete all as specified and as directed. |
| 34 | Material and Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of equired shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm.Complete all as specified and as directed. |
| 35 | Material and labour for preparation of new plastered surfaces applying 1.5 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic exterior grade oil base emulsion paint over a coat of wall primer on walls complete all as specified and as directed. |
| 36 | Complete removal of existing treatment and preparation of surface of wall ,washing,rubbing down and stopping of distempered and painted surface and applying two Coats of acrylic oil base emulsion paint (anti fungal) over a coat of wall primer on Walls surface. complete all as specified and as directed.:- |
| 37 | Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free, from dust, loose paint etc by skilled labour. complete all as specified and directed. |
| 38 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of equired shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior wall primer applied @ 0.90 litre/ 10 sqm.Complete all as specified and as directed. |
| 39 | M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specifed and as directed. . |
| 40 | M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 41 | M&L preparation of old plaster surfaces of ceiling and applying one coat of oil emulsion paint complete all as specified and directed. |
| 42 | M&L preparation of old plaster surfaces of ceiling and applying two coat of white wash all as directed by Engr-in-Charge . |
| 43 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) all as specified and directed. |
| 44 | Cutting opening in cement concrete reinforcement is cut through slabs (any descript-ion) for ,beam,staircass landing, chajjas and similar work reinforcement cutting slab size 200mm specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed. |
| 45 | M&L Cutting holes in brick/block walls in for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick n.exc one brick complete as specified. |
| 46 | M&L Cutting openings, through brick walls with cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixingand removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core,etc.. to store and rubbish not exc 50m complete as specified. |
| 47 | M&L for C:M 1.4 Making good under cills or over arches, lintels and bressummers including allpinning when necessary complete as specified. |
| 48 | S&F 12 mm thick Toughned glass as in hinged ,handle & latches doors, partitions automatic doors and similar work including floor spring cutting to shape, drilling holes required complete all as specified and directed.. |
| 49 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles . |
| 50 | M&L for Virified Ceramic tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.Complete all as specified and as directed. |
| 51 | All as per Item No 50.00 above but on vertical surfaces such as skirting incl including 8 to 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 52 | M&L PGVT Vitrified tiles dark shade 8 to 10 mm thick quare/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 53 | All as per Item No 52.00 above but on vertical surfaces such as skirting incl including 8 to 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 54 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.Complete all as specified and as directed. |
| 55 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300x 450x 7 mm /300X 600X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 56 | M&L for 300 x 300 x 9 to10mm thick heavy duty endure parking floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 57 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.Complete all as specified and as directed. |
| 58 | S&F Factory made 30 mm thick solid pannel prelaminated pvc moulded door shutter 30 mm thick (style) solid core consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading,4.5mm thick prelam pvc sheet on one side &4.5 mm thick plain pvc sheet on other side and joined to-gether with solvent cement as per specification.Complete all as specified and as directed. |
| 59 | S&F aluminium anodised barrel tower bolts of extruded section150mm long all as specified and as directed |
| 60 | S&F mild steel sliding door bolts 300mm size plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolts and two on staple plate in wooden shutters and welded /diveresed in steel shutters. |
| 61 | S&F125mm size, butt hinges, medium weight, cold rolled mild steel.Complete all as specified and as directed. |
| 62 | S&F aluminum extruded aluminium alloy handles (fabricated type) anodised of 150mm .Complete all as specified and as directed. |
| 63 | S&F Powdercoated anodised aluminium door window and ventilator shutters shutters, Sliding type with all fittings like lock strike plate rollers,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. Aluminium frame shall be mesured and paid separatly complete all as specified |
| 64 | S&F of Powder coated aluminum three track sliding shutters two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces.(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5 mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat per shutter -01 No.(vii) Two nos sliding rollers per shutter.(viii) Rubber shock absorber 03 No per shutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall – 06 No per window. |
| 65 | S&F 6.4mm thick decorative flat glass with wire mesh embedded in the glass by a special mesh unwinding systerm during glass forming. wired figured glass fixing with metal frame in exc 1.50 Sqmtr each pane complete all as specified and directed by .Make Modi guard,saint gobain |
| 66 | M&L powder coated anodised aluminium section of Jindal/Hind/Hindalco for frame and shutters for doors, including necessary joining cleats, glazing clips, rubber neoprene packing, handle, hinges, anodised aluminium snap beading, screws, etc complete all as specified and directed. |
| 67 | M&L for providing WPC Decorative louvered WALL PANELLING of 25mm thick consisting of panel of desired size stuck on inner frame work of 50 mm wide strips of 5 mm thick prelaminated PVC sheet . The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company . The strips should have in their centre a gove of 6mm widht and 1 mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips .The WPVC strips shall be fixed to the wall using 65 mm long MS screws through the groove in the strip by using WPVC fasteners the distance between two screws shall not be more than 200 mm . A groove of 2mm may be left at the joint of two panels for aesthetic looks . The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5 mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement . |
| 68 | S&F door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed,complete all as specified and as directed. |
| 69 | S&F in repairs factory made PVC shelf/partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. |
| 70 | S&F in repairs factory made PVC shelf/partition of required size consisting of panel of 12 mm thick required size consisting of panel of 12 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. |
| 71 | S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed |
| 72 | S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed . |
| 73 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required. |
| 74 | M&L for conceealed gride translated stretch flase ceiling 0.5 mm thick translated stretch ceiling with a hidden frame work often made of pvc of acrylic designed for diffused lighting effects. The material is a fixible membrance that is stretched across a concealed perimeter track. Thickness 0.5mm in product listings. Which is a common thickness for the membrane ie self. Film coated matte glossy,statin or printed finishes are available. Available in various colors translucent white is common for lighting integration. Custom prints and 3D patterns are also possible.Highly compatible with LED systems . especially the translucent types which allow light diffusion ) up o 75% light transmission). |
| 75 | S&F Glass block 190x190x80mm thick suitable for wall partition selected quality glass colour or design approved by Engr-In -Charge all as specified and directed |
| 76 | M&L single piece quartz stonecountertop wash basin 18 to 20mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement complete all as specified and diredctd. |
| 77 | M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing withwhite cement (1:2) using marble dust with admixture of pigment to match with shade of granite.Complete all as specified and as directed. |
| 78 | M&L Granular texture paint 3D designer stone finish diy application and granite luxury finished interior exterior wall paint 2.5kg stone with 500 ml liquid application including preparation of old wall suaface as per manufacturer instruction copmpete removal of existing .complete all as specified and diredctd. |
| 79 | S&F double action floor spring hydrualically regulated made up of minimum 12.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed. Complete all as specified and as directed. |
| 80 | M&L for Moorum filling,Spreading ,levelling in layers n exc. 25 cm thick and well ramming incl watering as required complete as specified and as directed. |
| 81 | M&L for PCC 100 mm thick 1:4:8 type B2 using 40mm graded stone aggregate as insub base finishing the surface rough to receive tilies.Complete all as specified and as directed. |
| 82 | M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick with broken stone or boulder, watered and rammed to a true surface.Complete all as specified and as directed. |
| 83 | M&L 75 mm thick PCC 1:3:6 type C2(using 40 mm graded agg) as in sub floor/sub base/ plinth protection etc.Complete all as specified and as directed. |
| 84 | M&L for 40 mm thick cement concrete type B1 1:2:4 (20mm stone aggregate) as in floor, sub bases, floors and pavings etc complete all as specified. |
| 85 | S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 86 | S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 87 | M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth.Complete all as specified and as directed. |
| 88 | S&Fixed Vitreous china single piece EWC with PP soft close seatcover, Hinges, Dule flushing cistern, Fixing Accessories Set and Cistern fittings , Size : 360 x 640 x 685 mm , P Trap 180mm . Make : Jaquar Cat Part No SLS-WHT-6851P |
| 89 | S&F Vitreous China Thin Rim Table Top Basin . Shape -Round , Size - 495 x 395x 150 mm including cupling fixing arrangement . Make : Jaquar Cat Part No PO-JAQ-JDS-WHT-25909 |
| 90 | S&F Health Faucet ABS with Rubbit Cleaning System , 1.00mtr Long PVC Flexible Tube & ABS Wall Hook . Make : Make Jaquar Cat Part No KALD-CHR-573GA |
| 91 | S&F piller tap Fusion series tall body . Make : Jaquar Cat Part No ARI-39021 |
| 92 | S&F Angular Stop Cock with Wall Flange . Make : Jaquar Cat Part No KUP-CHR-35053PM |
| 93 | S&F Two way Bib Cock with wall flange . Make : Jaquar Cat Part No KUP-CHR-35041 PM |
| 94 | S&F Towel Ring Round with Round Flange 20L x 20 Wx20H . Make : Jaquar Cat Part No CAN-CHR-1121BN |
| 95 | S&F Soap Dish Holder . Make : Jaquar Cat Part No ACN-CHR1-1131N |
| 96 | S&F Soap Dispenser with Glass Bottle . Make : Jaquar Cat Part No ACN-CHR-1135N |
| 97 | S&F Toilet paper l Holder . Make : Jaquar Cat Part No ACN-1151N or t . |
| 98 | S&F Bottom trap 32 mm size with 300 mm & 190 mm Long Wall connection Pipes & wall Flange . Make Jaquar Cat Part No ALD-769L300x190 |
| 99 | S&F rectangle Bungalow mercer LED Mirror for bath room touch dimmable,defogger controlled with round touch button for 3 colour light and brightness adjustable (100x76) cm mirror size white selected quality glass fitted to wall complete all as specified and directed |
| 100 | S&F 1000 litres Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position all as specified. |
| 101 | S&F PVC ball valve 20mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe all as specified. |
| 102 | S&F grating doom 125mm dia with waste hole of Chromium plated minimum weight 40 Gms complete all as specified and as directed. |
| 103 | S&F PVC (SWR) vent cowl 100mm dia.Complete all as specified and as directed. |
| 104 | S&F in Gun metal, PVCglobe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe.Complete all as specified and as directed. |
| 105 | M&L Cement concrete Type C1, 1:3:6 using 40 mm graded graded graded aggregate as in sub floor/sub base etc.Complete all as specified and as directed. |
| 106 | S&F PVC (SWR) pipes75mm single socketed, in any length with rubber ring joints, laid in trenches or in floors, wall include all fittingscomplete all as sfd and directed |
| 107 | S&F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches or in floors, wall include all fittings wall complete all as sfd and directed |
| 108 | Taking down existing roof felt including plaster of any description carefully from existing roof /parapet without disturbing wall surface and removing the same at a distance exc 1.5 Km complete all as specified and as directed. |
| 109 | M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding concrete to maintain slope complete all as specified and as directed. |
| 110 | M&L for rendering 15mm thick on fair faces on roof slab of concrete surface in CM 1:4 mixed with WPC at the rate of 2% by weight of cement as per manufacturers instruction finished the surface even and smooth without using extra cement (WPC shall be measured separately). |
| 111 | M&L for preparation of roof surface and applying a coat of hot bitumenous primer @ 1.5 Kg/sqm andsupplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less than 3kg/sqm) 3mm thick consisting 100 micron HMHDPE film membrane and torch application of membrane with 100mm overlaps at side and end lap where required and finally finished with and including a coat of aluminium paint @ 0.20 ltr/sqm as per manufacture instruction complete all as specified and directed. |
| 112 | Dismantling of wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness including cover fillets of any description including all snap grids and hanging arrangements complete all as specified. |
| 113 | Dismantling wrought iron or mild steel work of any description etc.Complete all as specified and as directed. |
| 114 | S&F rolled sections as in posts, main and cross beam, hip and jack rafters,purlins,where connected to common rafters (beam,tee,angle ,channel pipes , tubes, plates and flat sections etc)including distances pieces ,cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410,(gde-E-250) quality all as specified and directed. |
| 115 | M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 116 | M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 117 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 118 | M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat sunk or raised moulding surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) ®.Complete all as specified and as directed. |
| 119 | M&L for pop border of approveddesogn completed all as specified and directed. |
| 120 | Supply and laying sand in trenches for protection of cable, sand cushioning to cable 8 cm thick below cable and 15 cm thick above cable in layers complete all as specified and as directed. |
| 121 | Supply and lay sub class B bricks of size 25cm X 12.5cm X 7.5cm, laid in trenches, perpendicular to UG cable for cable protection complete all as specified and directed |
| 122 | S&F of GI pipe light grade galvanized with all fittings laid in trenches for cable protection of 50 mm bore all as specified and directed |
| 123 | Supply , Laying , testing and commissioning of XLPE insulated and PVC Sheathed, galvanized steel strip or wire armoured, heavy duty electric cable with multi stranded aluminium conductor, 1100 volts grade of size 25 sqmm 4 core complete all as specified & directed . |
| 124 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 125 | M&L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl suitable PVC conduit with accessories having ISI mark, concealed wiring with suitable sunken box for fixing modular switches, sockets, regularors, etc. for one light/fan/bell point controlled by one switch complete all as specified and directed. |
| 126 | All as per item No 125.00 here-in-before but for one multipin socket outlet 5 Amp on the independent board |
| 127 | All as per item No 125.00 here-in-before but for one multipin socket outlet 5 &15 Amp on independent board with copper wire 2.5 sqmm |
| 128 | S&F modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 129 | S&F modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 130 | S&F modular socket outlet multi pin 6 Amp 230 Volt, 2 module complete all as specified and directed. |
| 131 | S&F modular socket outlet multi pin 16 Amp 230 Volt, 2 module complete all as specified and directed. |
| 132 | S&F in replacement of Modular fan regulator, 120W-2 module any type and model suitable for existing one complete all as specified and directed. |
| 133 | M&L Ceiling rose, 3 terminal, PVC isolated body complete all as specified and directed |
| 134 | S&F of modular metal flush box with white cover plate with frame 3 module any type and model complete all as specified and directed |
| 135 | S&F of modular metal flush box with white cover plate with frame 4 module any type and model complete all as specified and directed |
| 136 | S&F of modular metal flush box with white cover plate with frame 6 module any type and model complete all as specified and directed |
| 137 | S&F of ultra bright LED tube rod 18 watt (G-13 lamp holder) 240V, PF greater than 0.9, colour temp 6500K, system luminous efficacy 110 lumen/watt, to be fixed in existing or new batten/patti including changing the witing suitable for T8 LED retrofit lamp in existing tube light fitting complete all as specified and directed |
| 138 | S&F LED light fitting 10W (2 ft), 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, complete all as specified and directed. |
| 139 | S&F of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, having colour temperature daylight (6500K), Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling complete all as specified and directed |
| 140 | S&F BLDC ceiling fans, completed with three blade, down rod, accessories 230V, (28-32 watt), 1200mm sweep with squirrel cage induction motor complete all as specified and directed. |
| 141 | S&F exhaust fan made of strudy engineering plastic complete with louver shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 250mm complete all as specified and directed. |
| 142 | S&F in replacement of sheet metal enclosure for MCB DB, TPN 415 volts, IP-43, 100 amps rated copper bus bar 4 way double door (vertical DB with provn of MCB as incomer) confirming to IS as per IEC 61439-3 including fixing the DB box flush in wall of any type and making good the disturbed surface to match the existing surface complete all as specified and directed. |
| 143 | S&F MCB 6 to 32 amp rating 240V, 10KA 'C' curve, Single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 144 | All as per item No 143.00 here in before but of SPN and capacity 40 Amps |
| 145 | All as per item No 143.00 here in before but of TPN and capacity 63 Amps |
| 146 | M&L in replacement of Earthing complete with galvanised steel earth plate electrode 600×600×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as directed. Please Enable Macros to View BoQ information |
