|
| 1 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. |
| 2 | M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces in two layers as 10mm thick in cement mortar 1:6 followed by 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instructions and finish the surface even and smooth without using extra cement, complete all as specified and as directed. Note: Supply of WPC will be measured and paid separately. |
| 3 | M&L for Rendering 5mm thick in CM 1:3 as in ceiling surfaces, finished even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. |
| 4 | Supply only Integral Water Proofing Compound. Make: Pidilite Industries Ltd Taloja / FOSROC / Dr Fixit / Asian paints |
| 5 | M&L for Preparation of new surfaces of ceiling and applying two coats of oil bound distemper (Acrylic distemper washable), any colour over a coat of primer, complete all as specified and as directed. |
| 6 | M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer on walls over with and including applying 1mm thick wall care putty for obtaining smooth surface, complete all as specified and as directed. |
| 7 | M&L for applying two coats of cement based paint on walls including preparation of newly plastered wall surfaces, complete all as specified and as directed. |
| 8 | M&L for preparation of old decorated surfaces of wall, pillasters, cornices, etc., by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of oil emulsion distemper paint, complete all as specified and as directed. |
| 9 | M&L for preparation of old decorated surfaces of ceiling by brooming down with steel wire brush ,scrapping down ,smoke soot ,mould ,moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of oil emulsion distemper paint, complete all as specified and as directed. |
| 10 | M&L for preparation of old surfaces of wood or wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed. |
| 11 | M&L for complete removal of old treatment of wood or wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying a coat of wood filler liquid trans present over a coat of oil staining and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 12 | All as per item No 11 above but not exceeding 10cm width or girth, complete all as specified. |
| 13 | M&L for preparation of old treated surfaces of steel or steel based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 14 | All as per item No. 13 above but not exceeding 10cm width or girth, complete all as specified. |
| 15 | M&L for complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss and efflorescent salts, oils & greasy spots etc., filling holes & cracks with wall care putty and applying two coats of oil bound distemper over a coat of primer on walls over with and including applying 1mm thick wall care putty for obtaining smooth surface, including preparation of old decorated surfaces of wall, complete all as specified and as directed. |
| 16 | M&L for Preparation of old decorated surfaces of wall, and applying one coat of cement based paint, complete all as specified and as directed. |
| 17 | M&L for complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss nad efforescent salts, oils & greasy spots etc., and applying one coat of exterior emulsion weather proof paint with anti fungal properties, including preparation of old wall surfaces, all as per manufacturer's instructions, complete all as specified and as directed. |
| 18 | M&L for complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss nad efforescent salts, oils & greasy spots etc., and applying two coats of exterior emulsion weather proof paint with anti fungal properties over a coat of primer, including preparation of old wall surfaces, all as per manufacturer's instructions, complete all as specified and as directed. |
| 19 | M&L for Repair of disturbed / brocken brick work in CM 1:6, including filling of narrow interstices with PCC 1:2:4 type B-0 (using 12.5mm aggregates) after and including removal/ root out of trees, plants, trunk, grasses and creeps etc., from roof or wall, finished with 15mm plaster in CM1:6, complete all as specified and directed. |
| 20 | S&F IN REPAIR Sheet glass 3mm thick, ordinary quality and glazing with and including oil putty or wooden bead in squares not exceeding 0.5 Sq.m in each pane, including hacking out old glass, complete all as specified. |
| 21 | S&F IN REPAIR Sheet glass 4mm thick, ordinary quality and glazing with and including oil putty or wooden bead in squares not exceeding 0.5 Sq.m in each pane, including hacking out old glass, complete all as specified. |
| 22 | S&F IN REPAIR 150mm bore PVC (SWR) eaves gutter trapezoidal profile pipe with fittings, fixed with PVC holder bats, bolts, nuts etc., complete all as specified and as directed. |
| 23 | S&F IN REPAIR Galvanised mild steel wire cloth, 0.36mm dia of wire and average width of aperture 1.40mm and fixed with galvanised steel wire staples, and including 2nd class hard wood beads straight (any size) for glazed or gauged joinery, renewed including mitrted etc and painting exposed surfaces of beads with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified. |
| 24 | M&L for Joint free Coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc. 0.06 Sq.m. but n. exc. 0.11 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 25 | Ml & L for Premium quality Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles over screed bed as bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4, with and including demolition of existing floor tiles of any type with bedding mortar,completeall as specified and as directed. |
| 26 | M&L for Light Shade Coloured Vitrified Ceramic tiles 08mm to 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in floors & skirting etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 27 | M&L for Joint free Ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exc 0.18Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified. |
| 28 | M&L for machine cut Granite stone, 18-20mm thick, premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab over 15mm thick screed bed in cement mortar 1:4 with and including rubbing and polishing including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 29 | M&L for machine cut Granite stone, 18-20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing complete including 10mm thick backing coat in CM 1:4 including dismantling stone slabs and tiles of any description or thickness in floors, aprons, laid or laid dry and pointed etc all as specified and directed. |
| 30 | S&F in repair 18mm thick decorative pre-laminated particle board, interior grade, pre-laminated on one side with white lamination on other side, as in cupboard shutters etc., fixed with and including 18mmx 6mm thick external teak wood lipping around edges finished with French polish complete all as specified and as directed. |
| 31 | S&F IN REPAIR Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed. |
| 32 | S&F IN REPAIR Chromium plated 15mm bore stop valves, fancy type, cast copper alloy, with long shank and cup (concealed), screwed down high pressure quarten turn screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer in charge. |
| 33 | S&F IN REPAIR Vitreous china Wash down water closet pan EWC (Pedestal pattern), white with 'P'or 'S' trap étc, (excluding flushing cistern) including plastic water closet seat cover closed pattern with flat bottom cover, flush pipe,mild steel chromium plated or aluminised hinging device, fixing bolts, etc, complete all as specified and as directed. |
| 34 | S&F IN REPAIR PVC valveless, syphonic action type low level flushing cistern, 10 ltrs capacity, white with inlet ball valve, float and handle soft touch type including brackets, PVC flush pipe etc complete fixed with CP brass screws complete all as specified and as directed. |
| 35 | S&F IN REPAIR Brass CP Mixer for mixing hot and cold water screwed down for iron pipe of 15mm bore dia and fixed complete all as specified and as directed. |
| 36 | S&F IN REPAIR Brass shower rose of 15mm inlet and 100mm outlet, chromium plated with swivel joint, CP shower arm and CP flange of approved make and quality, fixed to 15mm bore dia pipe, complete all as specified and as directed. |
| 37 | S&F IN REPAIR Corner glass shelf, 5mm thick, 9\\" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs complete all as specified and as directed. |
| 38 | S&F IN REPAIR Vitreous china wash hand basin, white, flat back, size 550x400mm, waste coupling and porcelain stopper including brackets including cutting for and pinning in ends of brackets, 40mm dia CP brass waste fittings, complete all as specified and as directed. |
| 39 | S&F IN REPAIR 15mm bore chromium plated pillar taps, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 40 | S&F IN REPAIR Brass chromium plated toilet paper holder fixed to wall with chromium plated brass screws, complete all as specified and as directed . |
| 41 | S&F IN REPAIR Vitreous china Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed. |
| 42 | S&F IN REPAIR Chromium plated health faucet with angular stop cock and 1.25m length pipe, screwed for iron pipe of 15mm bore, complete all as specified and as directed. |
| 43 | S&F IN REPAIR Tubular towel rack 600 mm, brass chromium plated, fixed to walls with plugs and chromium plated brass screws, complete all as specified and as directed. |
| 44 | S&F IN REPAIR Bib tap, 2 Way Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed. |
| 45 | S&F IN REPAIR Mirror cabinet of selected quality of size 350mm x 450mm x 5. 50 mm thick fixed on wall with suitable MS screws, completeall as specified and as directed. |
| 46 | S&F IN REPAIR 600mm x 450mm bevelled edge mirror 8 mm thick of selected quality glass mounted on 6mm thick commercial plywood / AC building board and fixed to wooden plugs with CP brass screws and cup washers and provision of wooden beading around the mirror, complete all as specified and as directed. |
| 47 | S&F IN REPAIR Stainless steel sink of overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, made of 1.0mm thick Stainless steel sheet 304 grade for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, with and including PVC waste pipe and coupling, complete all as specified and directed. |
| 48 | S&F IN REPAIR PVC connection (high density) 15mm dia 600mm with PTMT nuts both ends with rubber washer, complete all as specified and directed. |
| 49 | S&F IN REPAIR 3 Way mixer tap for hot & cold water, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia pipe, complete all as specified and as directed. |
| 50 | S&F IN REPAIR Seat cover for EWC closed pattern with flat bottom and mild steel chromium plated hinging device, complete all as specified and as directed. |
| 51 | S&F IN REPAIR Stainless steel wall mounted plate rack of size 900x1200x300 mm and thickness of sheet 1mm with provision for keeping plates and other crockery, fixed with screw and rawal plug etc on wall complete all as specified and directed. Please Enable Macros to View BoQ information |
| 52 | S&F IN REPAIR Stainless steel wall mounted plate rack of size 900x1200x300 mm and thickness of sheet 1mm with provision for keeping plates and other crockery, fixed with screw and rawal plug etc on wall complete all as specified and directed. Please Enable Macros to View BoQ information |
