Tender For Construction Of A.E. Office Cum Residence & J.E. Office Cum Residence At Mashobra Distt.Shimla Hp. (Sh: - Building Portion, Ws & Si. , Rain Water Harvesting Tank ,Septic Tank & Site Development Etc.), Shimla-Himachal Pradesh

TDR : 55031813

Tender Notice
BOQ

7 Days Left

Shimla , Himachal Pradesh

Tender Brief : Tender For Construction of A.E. Office Cum Residence & J.E. Office Cum Residence At Mashobra Distt.Shimla Hp. (Sh: - Building Portion, Ws & Si. , Rain Water Harvesting Tank ,Septic Tank & Site Development Etc.)

Document Fees
₹ 7000 /-

EMD
₹ 489000.0 /-

Tender Value
Refer document

Submission Date
18-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Cutting and disposal of earth work in by mechanical in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ).All the surplus excavated earth to be dumped at dumping site(dumping sites will be arranged by the contractor on his own cost). Any loss to the public and private propriety, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
2	Earth work in excavation for structure in all depths as per drawing and technical specification for rural roads August 2004 clause 305.1 including setting out, construction of shoring abd bracing, removal of stumps and other deleterious materials and disposal in all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and wedging out rock (where balsting is prohibited) all earth work in cutting/ excavation including rock excavation shall be carried out true to lines grades, side slopes, width , camber super elevation and level as shown on the drawings or as directed by the Engineer-in-charge hauling and stacking of materials useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified dimension or as directed by the Engineer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other causes it shall be remove by suitable diversion bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. All the surplus excavated earth to be dumped at dumping site(dumping sites will be arranged by the contractor on his own cost).Any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be dully compensated by him at his on cost in all cases. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
3	Supply and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
4	Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
5	Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
6	Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
7	Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts Circular upto all floor levels complete ncluding carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
8	Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers upto all floor levels complete ncluding carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
9	Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral stair cases upto all floor levels complete ncluding carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
10	Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
11	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:6:12 (1 Cement : 6 coarse sand) : 12 graded stone aggregate 40mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
12	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.(i)1:4:8 (One cement : four coarse sand): eight graded stone aggregate 40 mm(forty milimetre) nominal Size The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
13	Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to all level :In retaining wall etc.1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 20 mm nominal size) upto all all levels complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
14	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
15	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth level upto all floor level The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
16	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto upto all floor levels .Mild steel and Medium Tensile steel bars complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
17	Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg. of cement per sq.metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete.carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
18	Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (1 cement : 3 sand) carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
19	Providing and laying water proofing treatment with Dr. Fixit- FASTFLEX or equivalent with two components polymer modified cementititions coating consisting of cementitious powder and polymer liquid in two coats for first coat :- clean and saturatw surface and than applying a coat of Dr. Fixit-FASTFLEX by maintaining a coverage of 6-7 sft.per Kg. to achive 1.00 mm thickness and the same process shall tended 300 mm. vertically . The second coat shall be applied in opposite direction after four six hours of application of first coat than sprinkle sand on top of surface of applied Dr. FIXIT-FASTFLEX while still tacky over the second coat. Than apply cement mortar 1:4 (1 cement:4 Sand ) admioxed with 200 ml. of pidiproof LW @ 200 ml. per 50 Kg bag of cement over the floor with the suitable grediant towards drain pipe ,while the second coat of Dr. Fixit is still tacky complete up to all floor levels including carriage of materials in all leads and lifts. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
20	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth l in all shapes and sizes in : in Cement mortar 1:6 (1 cement : 6 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
21	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floors level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST..
22	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
23	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure in : Cement mortar 1:4 (1 cement : 4 coarse sand) upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
24	Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
25	Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. completencluding carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
26	Stone filling behind retaining walls complete including carriage of material in all leads and lifts as per direction of the Engineer- in -Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
27	Supplying and filling brocken/crushed stone aggregate chipping of hard stone of 40 mm size including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
28	Providing weep holes in brick masonry/stone masonry/plain concrete/reinfoced concrete, abutment, wing walls with 100 mm dia PVC pipe extending through the full length with of the structure with the slope of I (V) : 20 (H) towards drawing face complete as per drawing and technical specifications complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
29	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length.Second class Deodar wood. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
30	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class Deodar wood 40 mm thick shutters. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
31	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (i) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
32	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (ii) Float glass panes 4 mm thick glass pane The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
33	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including all leads and lifts and as directed by theEngineer-in-Charge. : 40 mm thick shutters 2nd class deodar wood.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
34	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. complete including carriage of material in all leads and lifts:- 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
35	Providing and fixing built up UPVC casement double tractor windows profile specifications :- Outer frame - 12601 (110mm x 60mm), Sash-12617 (80mm x 60mm) Z Mullion - 3086 beading 22mm X 18mm, Coupling - 12358 ( 70mm ) including shutters with chember thickness 2.60 mm and GI frame thickness 1.20mm to 2.00mm and 6mm + 12mm +6mm DGU toughned double glass gap filled with argon gas fixed with thermoplastic elastomer (TPE) gasket including fly mesh Zinc alloy casement handle, Friction Stay / 2D hinges/ butt hinges, espag multipoint locking system, locking strickers as per approved colour complete as per approved Architectural drawing in all leads and lifts including carriage of materials and as per the direction of the Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll texes imposed by the Government but excluding GST.
36	Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
37	Providing and fixing 20 mm Stain less steel curtain rods of wall thickness 1.25 mm with two SS brackets & feenal fixed with brass screws and wooden plugs etc. wherever necessary complete.including carriage of material in all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
38	Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
39	Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
40	Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
41	Providing and fixing 1.00 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
42	Providing and fixing square edged cover fillets (beading) 19 x 6 mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
43	Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as directed by theEngineer-in-Charge. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
44	Providing and fixing sliding arrangement in racks /cupboards /cabinets shutter by with stainless rolers to run inside C or E aluminium channel section ( The payment of C or E channel shall be paid separately) complete as directed by the Engineer-in-Charge. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
45	Providing and fixing 75 mm x 65 mm rounded hand rails in straight length complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. in. 1st class Deodar wood. The rate is including octroi, royality Malkana, toll texes imposed by the Government but excluding GST.
46	Providing and fixing aluminium sliding door bolts (Barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:-300 X 16 mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
47	Providing and fixing aluminium sliding door bolts (Barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge 250 X 16 mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
48	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. : 250mm x 10mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
49	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. : 200 X 10 mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
50	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. : 150 X 10 mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
51	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :125 mm.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
52	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :100 mm.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
53	Providing and fixing bright finished brass hanging type floor door stopper ISI marked, anodised (anodic coating not less than grade AC 10 as per IS 1868) (anodiwith necessary screws, etc. complete including carriage of materials in all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
54	Providing and fixing Stainless steel extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.The rate is including octroi, royality, nMalkana, toll texes imposed by the Government but excluding GST.
55	Providing and fixing special quality chromium plated brass cupboard locks with six levers Size 65 mm of approved quality including necessary screws etc. complete. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
56	Providing and fixing 50 mm bright finished brass cup board or ward robe Knob of approved quality with necessary screws, etc. complete including carriage of materials in all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
57	Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
58	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of leaver handles of approved quality with necessary screws etc. complete. including carriage of materials in all leads and lifts .The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
59	Providing & fixing 115 mm M.S bright finished brass hasps and stapples (safety type)with necessary screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
60	Providing and fixing ISI marked Stainless steel 304 grade single acting spring hinges with necessary screws etc. complete. ccomplete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-.150 mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
61	Providing and fixing ISI marked Stainless steel 304 grade Double acting spring hinges with necessary screws etc. complete. ccomplete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-.150 mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
62	Providing and fixing PGI Sheet 0.63mm thick lining with butt jointing and nails with necessary scwews complete as per Architectural drawing including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
63	Providing and fixing 6 mm thick Fiber board ceiling of Everest or its equivalent with angle iron 25x25 mm and T-section 25x25 mm complete as per Arch.Drg. and specification . including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality Malkana, toll texes imposed by the Government but excluding GST.
64	Providing and fixing 6 mm thick Everest board in ceiling of size (595X595mm) of approved shade and pattern mounted on powder coated G.I. frame work fixed/ hanging with wall or ceiling etc. with specified clamp and G.I. wire and rawl plugs etc. complete.including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
65	Providing and laying Full body Charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 1200mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
66	Providing and laying Full Body Charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600mm x 1200mm.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
67	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate including carriage of material within all leads and lifts as per direction of Engineer-in-charge. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
68	Cement plaster skirting up 18 mm thick upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
69	Providing and laying Double Charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 1200mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
70	Providing and laying Double Charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600mm x 1200mm.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
71	Providing and laying Ceramic glazed floor tiles of size 300x300 mm of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
72	Providing and fixing 1st quality ceramic glazed floor tiles sise 30x45 cm/ 30x60 cm. conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
73	Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 19 mm thick.including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
74	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
75	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels white marble/ Udaipur green marble/ Zebra black marble/ Baroda green Marble.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
76	Providing and laying HDF flooring AC5 tiles of size175x1200 mm (thickness to be specified by the manufacturer), of approved shade of ARMSTRONG make, in colours, shades,as approved by the Arch. laid on polythene and EPE foam 20 to 30 mm thick sub base, complete with all accessories like skirting,corner etc. including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
77	Providing edge moulding to 18 mm thick marble/Kotah stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
78	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge:- 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
79	Providing and fixing glass strips in joints of terrazzo/cement concrete floors.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
80	Providing and fixing 0.60mm thick TATA Durashine prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
81	Providing and fixing ridges or hips 60 cm overall with 0.60mm thick TATA Durashine prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. Ridges plain (500 - 600mm) The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
82	Providing and fixing valley 60 cm overall 0.60mm thick TATA Durashine prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. ,North light curves The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
83	Providing and fixing Flashing 60 cm overall 0.60mm thick TATA Durashine prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.:-Flashings/ Aprons.(Upto 600 mm) The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
84	Providing and fixing Gutter 60 cm overall 0.60mm thick TATA Durashine prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. :-Gutter (600 mm over all girth) The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
85	Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- 150 mm diameter metre . The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
86	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:- PVC bend 87.5° 150 mm bend. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
87	roviding and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:-PVC Door bend 150 mm bend The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
88	roviding and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:-PVC plain shoe 150 mm The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
89	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- 150 mm. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
90	Providing and fixing MS BP sheet 2.00 mm thick in eves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( base members of steel work shall be measured and paid seperately ).The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
91	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
92	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
93	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
94	Providing and fixing mild steel round holding down bolts with nuts and washer plates complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
95	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- M.S. tube. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
96	Providing and fixing angle iron door, windows clerestory windows frames manufactured from M.S. angle iron angle section of size 40mm X 40mm X 6mm thickness including hinges jambs lock jamb,beed and if required angle threshold of mild steel angle 50mm x 25mm welded or rigidly fixed by mechanical means lug with split end tails to each jamb including steel butt hinges 2.5mm thick with provision for locking arrangment and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface including carriage of material within all leads and lifts as per direction of Engineer-in-charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
97	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
98	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
99	6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) up to all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
100	15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) up to all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
101	15 mm cement plaster on the fair side in single coat as shown in eveletion as per pattern on wall and corner as per Arch. Drg. of mix : 1:6 (1 cement: 6 fine sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
102	15 mm cement plaster on the fair side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) up to all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
103	Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
104	Distempering with Premium Synthetic /Acrylic washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
105	Distempering with Acrylic washable distemper of approved brand and manufacture to give an even shade in ceiling and slopy roof :New work (two or more coats) over and including water thinnable priming coat with cement primer complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
106	Finishing walls with Apex weather proof exterior emulsion paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
107	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
108	Providing and fixing 20mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. External work The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
109	Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. External work The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
110	Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
111	Providing and fixing 20 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of material in all leads and lifts as per direction of the Engineer in Charge. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
112	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :25 to 40 mm nominal bore The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
113	Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (cost of water meter and stop cock to be paid separately).The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
114	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.1000 lt. capacity The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
115	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC. cover with frame (light duty) 300mm x 300 mm internal dimensions, , R.C.C. top slab with M25 mix ( stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: - Inside dimensions 300mm x 300mm and 500 mm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
116	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.INTERNAL WORK - EXPOSED ON WALL 1216 (16 mm OD) pipe The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
117	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.INTERNAL WORK - EXPOSED ON WALL 1620 (20 mm OD) pipe The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
118	Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.16mm Dia ( 16 mm OD) pipe The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
119	Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.20 mm Dia ( 20 mm OD) pipe The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
120	Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work 1216 (16 mm OD) pipe The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
121	Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work 1620 (20 mm OD) pipe The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
122	Providing and fixing high pressure PVC Finolex Type-B spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
123	Providing and fixing high pressure PVC Finolex Type-B spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
124	Providing and fixing PVC Finolex single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
125	Providing and fixing PVC Finolex single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
126	Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
127	Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
128	Providing and fixing PVC (Finolex)single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
129	Providing and fixing PVC (Finolex)single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
130	Providing and fixing PVC Finolex collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
131	Providing and fixing PVC Finolex collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
132	Providing and fixing PVC Finolex plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
133	Providing and fixing PVC Finolex plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
134	Providing and fixing MS clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- 150 mm dia The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
135	Providing and fixing MS clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- 110 mm dia The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
136	Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts:-110 mm x 90 mm The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
137	Providing and fixing PVC Finolex cowl including carriage of materials within all leads and lifts :-150 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
138	Providing and fixing PVC Finolex cowl including carriage of materials within all leads and lifts :-110 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
139	Providing and fixing PVC (Finolex) Double equal branchwith ovel acces door, insertion rubber washer3 mm thick ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
140	Providing and fixing PVC (Finolex) Double equal branchwith ovel acces door, insertion rubber washer3 mm thick ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
141	Providing and fixing PVC (Finolex) Plain Double equal branch ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
142	Providing and fixing PVC (Finolex) Plain Double equal branch ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
143	Providing and fixing PVC Reduser ISI marked including jointing with approved adhesive etc. complete i/c carriage of materials within all leads and lifts :-150 mmx110 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
144	Providing and fixing PVC Reduser ISI marked including jointing with approved adhesive etc. complete i/c carriage of materials within all leads and lifts :-110 mmx 90 mm dia. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
145	Providing and fixing JAQUAR or its equivalent floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white PVC cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
146	Providing and fixing Henry Brass Health Foucet with with Braided 1 metre Flexible hose( 304 Grade) of JAQUAR, including carriage of material in all leads and lifts as per direction of the Engineer in Charge The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
147	Providing and fixing White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with C.I. brackets, of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
148	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 200 mm The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
149	Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm No.60002 with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
150	Providing and fixing white vitreous china divison plate of IS No. 5011 for Urinal including making all connections including cost of fittings : Size 600x300 mm including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
151	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
152	Providing and fixing C.P. brass 32 mm dia waste for wash basin or sink including carriage of materials within all leads and lifts :-The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
153	Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut including carrage of material within all leads and lifts:-The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
154	Providing & fixing 110mm dia C.P. grating for floor or nahani / gully / floor trap including carriage of material within all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
155	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
156	Providing and fixing 600mm X 20mm size C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
157	Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete,including carriage of materials within all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
158	Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
159	Providing and fixing 15mm dia CP brass bib tap of (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
160	Providing and fixing 15mm dia CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
161	Providing and fixing 15mm dia C.P.brass angle valve of jaquar with flange (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
162	Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:-15 mm nominal bore with 45cm length. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
163	Providing and fixing JAQUAR or its equuivalant Stainless steel Sink mixer with regular swinging spout (wall mounted), including carriage of material in all leads and lifts as per direction of the Engineer in Charge The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
164	Providing and fixing JAQUAR or its equuivalan Fusion wall /Bath mixer with connector for Hand shower arrengement connecting Legs FUSCHR 29267, including carriage of material in all leads and lifts as per direction of the Engineer in Charge The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
165	Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
166	Providing and fixing 15 mm nominal bore C.P.brass stop cocks including carriage of materials within all leads and lifts :- The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
167	Providing and fixing PTMT bib cock of approved quality and colour including carriage of materials within all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
168	Providing and fixing PTMT Push cock of approved quality and colour 15 mm nominal bore ,80 mm long weighting not less than 46 gms. including carriage of materials within all leads and lifts. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
169	Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts :-15 mm nominal bore :- The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
170	Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts :-20 mm nominal bore :- The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
171	Providing and fixing 15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
172	Providing and laying 150mm dia (to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150mm dia in trenches including carriage of materials within all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
173	Providing and laying cement concrete 1:4:8 (1 Cement : 4 Sand : 8 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the following internal diameters, necessary form work and curing complete including carriage of materials within all leads and lifts:- 150mm.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
174	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including RCC cover with frame 455x610 mm internal dimensions, : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
175	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120cm x 90cm and 90cm deep including RCC cover with frame (medium duty) 500mm internal diameter, : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
176	Providing and instalation Electric Pump 2HP Complete including carriage of meterials in all leads and lifts.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
177	Cutting holes up to 30cm x 30cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
178	Cutting holes up to 15cm x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
179	Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.
180	Providing and fixing precast reinforced cement concrete chamber cover with frame complete for man hole of internal dimension 300mm x300mm i/c carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.( M-25 Grade ) Design Mix).
181	Providing and fixing precast reinforced cement concrete chamber cover with frame complete for man hole of internal dimension 610mm x 455mm i/c carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality,Malkana, toll texes imposed by the Government but excluding GST.( M-25 Grade ) Design Mix). Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of A.E. Office Cum Residence & J.E. Office Cum Residence At Mashobra Distt.Shimla Hp. (Sh: - Building Portion, Ws & Si. , Rain Water Harvesting Tank ,Septic Tank & Site Development Etc.), Shimla-Himachal Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of A.E. Office Cum Residence & J.E. Office Cum Residence At Mashobra Distt.Shimla Hp. (Sh: - Building Portion, Ws & Si. , Rain Water Harvesting Tank ,Septic Tank & Site Development Etc.), Shimla-Himachal Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us