Tender For Construction Of Office Building Of District Ayurvedic Medical Officer Bhawanipatna Dist. Kalahandi.., Kalahandi-Odisha

TDR : 55029953

Tender Notice
BOQ

5 Days Left

Kalahandi , Odisha

Tender Brief : Tender For Construction Of Office Building Of District Ayurvedic Medical Officer Bhawanipatna Dist. Kalahandi..

Document Fees
₹ 10000 /-

EMD
₹ 190000.0 /-

Tender Value
₹ 1.89 Crore /-

Submission Date
24-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.
2	All kinds of Soil (1.50m to 3.0m)
3	Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. `
4	Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc, all complete as per the specification and direction of Engineer-in-charge.
5	Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
6	Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 40mm nominal size) as levelling course in floor and plinth including tempering, curring, shuttering etc. complete all depth and height.
7	Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in foundation and plinthGF
8	Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.GFa) Foundation :-
9	b) Column up to Plinth
10	c) Column above plinth :- g)Roof Beam :-
11	d) Plinth Beam :-
12	e) Lintel :-
13	f) Chajja and fins
14	h) Slab :-
15	i) Stair case :-
16	FFa) Column c) Roof Beam :-
17	a) Lintel :-
18	b) Chajja and Fins
19	d) Slab :-
20	e) Stair case :-
21	TFa) Column c) Roof Beam :-
22	a) Lintel :-
23	b) Chajja and Fins
24	d) Slab :-
25	Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding ( Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-In-Charge.Cold Twisted bars, Thermo-Mechanically-treated bars.GF
26	12mm cement plaster on External RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.GF
27	16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.GF
28	6mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.GF
29	Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.(Data for 10 Sqm )GF
30	Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge GF
31	Providing, fitting and fixing Vitrified tile in floor of size 600x600 mm of approved make conforming to IS: 13755 laid on 20 mm thick cement mortar 1:4 (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-In-Charge (for New work only)GF
32	Supplying, fitting & fixing of Vitrified floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 13755 of size 60cm x 60cm coloured/printed series in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.GF
33	Supplying, fitting & fixing of Chequered tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with epoxy gouut of of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge GF
34	Providing and fixing seasoned sal wood work in frames at any locations including doors, windows, cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mmx6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing/specification, at all floors and all heights. GF FF TF
35	Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete (As per SoR 2022)GF FF TF
36	Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.GF FF TF
37	Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. GF FF TF
38	Providing & applying priming coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.GF
39	Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete.GF
40	Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.GF
41	Wall Painting two coats with approved Plastic Emulsion Paint in Ground FloorGF
42	Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour completeGF
43	Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.GF FF
44	Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2'0\\" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'0\\"x2'0\\" with Gypsum board suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-chargeGF FF
45	Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor at all floors and all heights.FF
46	Supplying & laying of precast interlocking concrete block of 80 mm thick of approved design and filling the joint with sand on the prepared surface including cost of all charges etc. complete .
47	Construction of embankment with approved materials obtained from borrow pits with all lifts and leads transportating to site within a lead of 5km and spreading grading
48	Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 F.R.L.S PVC insulated single core multi strand copper conductor of ISI marked with 50mm dia Non metallic with 20mm dia non metalic PVC flexible conduit with 5/6 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FRLS pvc insuleted S/C multistand copper conductor as earth wire Including all accessories and connection.as per direction of ingineer-in-charge. (Make of wire Finolex/Anchore/ Havels/HPL/L&T/ V.Guard.a)Group-A
49	b) Group-B
50	c) Group-C
51	Recessed modular wiring to 5/6A socket outlet with 2x1mm2 PVC Insulatted S.C FRLS multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with modular type switch.a) Group-A
52	b) on existing board
53	Wiring to Circuit/ Sub-main along with earth wire with following size of FRLS PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard.1x1.5mm2 Sub-Main Wiring for Invertor connectiom.
54	a) (1.8.1) 2X1.5mm2 + 1x1.5mm2
55	b) (1.8.2) 2X2.5mm2 + 1x1.5mm2
56	c) (1.8.3) 2X4mm2 + 1x1.5mm2
57	d) (1.8.4) 2X6mm2 + 1x2.5mm2
58	Recessed modular wiring to power plug point consisting of 16A modular shuttered socket and 16A indicator type switch with 2x4mm2 PVC Insulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x1.5mm2 FRLS PVC insulated S.C C.U. wire for loop earthing as required of Havels make.
59	S/F of computer Board consisting of 3 Nos of Modular plug and switch all accessories including recessed wiring,Cutting of wall & connection as per requirement.
60	S/F of 5 step type Antibacterial electronic fan regulator of panasonic/havells/legrand/ L&T equivalent make
61	S/f of 5star rated Ceilling fan per direction of engineer in charge make: Havells/CG/Bajaj/eq.
62	S/F of 18wt LED T.L fitting of Phillips/ Bajaj/Havels make
63	S/F of Modular Angle Holder.
64	S/F of 10wt LED Bulb of Phillips/ Bajaj/Havels make
65	S/F of 12watt Surface mounted LED down light complete of Havells/Bajaj/HPL make.
66	S/F of 12wt LED ceilling down light complete with lamp of Havels/HPL/Bajaj make.
67	S/F of 25A/32Amp AC starter switch of Havells/legrand /or equivalent make.
68	S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard .
69	S/F of 90wt LED Street light fittings complete with lamp of Havels/HPL/Bajaj make.
70	Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc
71	S/F of 1650 VA UPS( Microtake/Luminous) with 2nos 150 AH Sine Wave inverter battery ( make Exide/Amaron/Luminous or equivalent)
72	S/F of Ultra modern surface mounted Decorative oval Bulk head edge LED Luminaire complete with 10watt LED lamp. (Make Hvells/Endura Rugby model)
73	S/F of Call bell/ Buzzer and Bell push and flexible cord.
74	S/F. of 12Way double door D.Box with 40A DP MCB + 12x6A.SP MCB of Havels make.
75	S/F of (4+12) way double door TPN distribution Box for single phase out going incoming- 63Amp TPN MCB of havells make, outgoing- 12 x (6-32)A SP MCB as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T) Light DB
76	S/F of (4+12) way double door TPN distribution Box for single phase out going incoming- 63Amp TPN MCB of havells make, outgoing- 6 x 32A DP MCB as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T)
77	S/F 4 x 16 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)
78	S/F 3 1/2 x 25 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)
79	Cost for supply and fixing of Cable tray of required size to be installed at corridor& junction points as per direction of engineer in charge
80	Fabrication of 250A panel board of size 1050mmx 1260mm x 330mm with powder coat made out of 18 SWG CR sheet with Incoming: 250Amp MCCB four pole 36KA breaking capacity -1No,400A, 25mm x 12mm copper Busbar-1no, Outgoing: 100Amp MCCB four pole 25KA Breaking capacity - 02 Nos, 63Amp MCCB four pole 16KA breaking capacity -4No, 40Amp DP MCB -4No ,250Amp four pole Onload Change over -1No,Volt meter,Ammeter CT coil,RYB indicator,Transporation and fixing charges etc. (Main Incomer Panel Board) Protecective device(MCCB,Changeover switch) should have make of (L&T/Hager/Schnider/legrand)
81	S/F 3 1/2 core x 70 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels).
82	S/F of Standard Earthing with G.I. earth pipe of 3mtr.Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
83	S/F of Special Earthing complete with provision of 600x600x3.15mm thick copper plate along with 25x5mm copper strip in 40mm dia GI pipe including soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
84	S/F of 2kg ABC Dry powder (S/P) Type Fire Extinguisher pressurized with dry Nitrozen gas at 15 bar.as per IS 15683 with fire rating 2A,21B,at 35 bar,operating temperature-30C to + 55C supplied with standard accessories.as per Gem rate.of any ISI marked.
85	Provision of lightning arrester with 85mm dia 3mm thick copper base pate and copper tape 20x3mmthick including all accessories.
86	Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.
87	Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate.
88	Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.
89	Supply and handing over 11KV Tested Rubber hand gloves to be used on LT supply with Test certificate.
90	Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.
91	Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 F.R.L.S PVC insulated single core multi strand copper conductor of ISI marked with 50mm dia Non metallic with 20mm dia non metalic PVC flexible conduit with 5/6 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FRLS pvc insuleted S/C multistand copper conductor as earth wire Including all accessories and connection.as per direction of ingineer-in-charge. (Make of wire Finolex/Anchore/ Havels/HPL/L&T/ V.Guard.a)Group-A
92	b) Group-B
93	c) Group-C
94	Recessed modular wiring to 5/6A socket outlet with 2x1mm2 PVC Insulatted S.C FRLS multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with modular type switch.a) Group-A
95	b) on existing board
96	Wiring to Circuit/ Sub-main along with earth wire with following size of FRLS PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard.1x1.5mm2 Sub-Main Wiring for Invertor connectiom.
97	a) (1.8.1) 2X1.5mm2 + 1x1.5mm2
98	b) (1.8.2) 2X2.5mm2 + 1x1.5mm2
99	c) (1.8.3) 2X4mm2 + 1x1.5mm2
100	Recessed modular wiring to power plug point consisting of 16A modular shuttered socket and 16A indicator type switch with 2x4mm2 PVC Insulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x1.5mm2 FRLS PVC insulated S.C C.U. wire for loop earthing as required of Havels make.
101	S/F of computer Board consisting of 3 Nos of Modular plug and switch all accessories including recessed wiring,Cutting of wall & connection as per requirement.
102	S/F of 5 step type Antibacterial electronic fan regulator of panasonic/havells/legrand/ L&T equivalent make
103	S/f of 5star rated Ceilling fan per direction of engineer in charge make: Havells/CG/Bajaj/eq.
104	S/F of Call bell/ Buzzer and Bell push and flexible cord.
105	S/F of 18wt LED T.L fitting of Phillips/ Bajaj/Havels make
106	S/F of Modular Angle Holder.
107	S/F of 10wt LED Bulb of Phillips/ Bajaj/Havels make
108	S/F of 12watt Surface mounted LED down light complete of Havells/Bajaj/HPL make.
109	S/F of 12wt LED ceilling down light complete with lamp of Havels/HPL/Bajaj make.
110	S/F of 25A/32Amp AC starter switch of Havells/legrand /or equivalent make.
111	S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard .
112	S/F of 1650 VA UPS( Microtake/Luminous) with 2nos 150 AH Sine Wave inverter battery ( make Exide/Amaron/Luminous or equivalent)
113	S/F of Ultra modern surface mounted Decorative oval Bulk head edge LED Luminaire complete with 10watt LED lamp. (Make Hvells/Endura Rugby model)
114	S/F of (4+12) way double door TPN distribution Box for single phase out going incoming- 63Amp TPN MCB of havells make, outgoing- 12 x (6-32)A SP MCB as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T) Light DB
115	S/F of (4+12) way double door TPN distribution Box for single phase out going incoming- 63Amp TPN MCB of havells make, outgoing- 6 x 32A DP MCB as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T)
116	S/F 4 x 16 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)
117	S/F 3 1/2 x 25 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)
118	Cost for supply and fixing of Cable tray of required size to be installed at corridor& junction points as per direction of engineer in charge
119	S/F of 2kg ABC Dry powder (S/P) Type Fire Extinguisher pressurized with dry Nitrozen gas at 15 bar.as per IS 15683 with fire rating 2A,21B,at 35 bar,operating temperature-30C to + 55C supplied with standard accessories.as per Gem rate.of any ISI marked.
120	ACS/F of Copper 5 Star Rated 1.5 Ton Split type AC.Machine make of Carrier/Voltas/LG/Bluestar etc of ISI make.
121	Installation charges of 1.5 ton AC.machine.
122	S/F of 4KVA Voltage stabiliser having digital display ,intial time delay system i.e certified with ISO 9001:2008 with working range of (90-300)V of make V.guard/Autotake
123	S/F of Extra long copper pipe for indoor unit to out door unit.( As per Outdoor Unit Location)
124	55mm2 AAAC conductor
125	11 KV V- Cross Arm (MS) (10.2 Kg each)
126	Pressure Channel 100 x 50x 6mm 2.8mtr long 2nos(9.2kg/mtr)
127	Transformer mounting channel 100 x 50x 6mm 2.8mtr long 2nos(9.2kg/mtr)
128	A/B switch and HG Fuse mounting Channel 75 x40x6mm 2.8mtr long 4nos(6.8kg/mtr)
129	Cantilever Channel for Supporting A/B switch and HG Fuse arm 75 x40x6mm 1.5mtr long 4nos(6.8kg/mtr)
130	Angle for Cantilever Arrangement forA/B switch and HG Fuse arm 50 x50x6mm 1.5mtr Each 4nos(4.5kg/mtr)
131	Transformer belting 50x50x6mm angle 2.8 mtr long 2 nos (4.5kg/mtr) with side angle (total 7mtrs)
132	Angle for mounting LTDB arm 50 x50x6mm 2.5mtr long 2nos (4.5kg/mtr)
133	75x40x6mm channel 1.5mtr long 1no (6.8kg/mtr)for supporting of AB switch handle,Guarding &cut points
134	11KV disc insulator(T&C)
135	11KV H/W Fitting (T&C Type)
136	11KV A/B switch 3 pole
137	11KV H/G Fuse 3 pole
138	11KV Lightning arrestor
139	H.T stay set complete
140	H.T stay insulator
141	HT stay clamp
142	7/10 SWG stay wire
143	GI Pipe earthing 40mm dia medium gauge 2.5mtr long
144	no.6 GI wire for earthing
145	concrete materials for stay anchor plate
146	Padding & Concreting for material for support
147	material for masonary work for earth pit
148	charcoal,salt etc for earthing
149	clamp,connector &jumpering material
150	GI bolts,nuts &washers
151	sundries(aluminium binding tap,insulating tap,fencing metal spreading ,anti climbing device,paint,danger board etc)
152	11kv pin insulator
153	11kv GI pin
154	Outdoor LT DB with 100A MCCB and 25 x 5 Cu flat Busbar
155	socket & other cable accessories
156	LT 31/2 core PVC cable as per wesco norms
157	Back Clamp for 'V' Cross Arm (1.7kg)
158	11 KV F Clamp 2.9 Kg. each
159	Eye Hook
160	8 SWG GI wire
161	Clamp for bracing Channel
162	Back Clamp for Channel
163	Arial bunch conductor(ABC) with 3 x 50mmsq(for phase) + 1 x 25mmsq catenary (neutral) + 1 x 16 sqmm (street light Phase) for 3 phase 5 wire for overhead line
164	Cost of 25KVA,11/0.4KV S/S
165	supports PSC Pole 9 mtr long
166	Fencing of barbed wire & metal gate as per WESCO norms
167	Metal spreading to level ground area of S/S as per WESCO norms
168	Emergency Inspection fees for line ,S/S & Building
169	Supervision & security Charges
170	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia PVC ASTM pipe (sch-80)Ground Floor
171	First floor
172	25mm dia PVC ASTM pipe (sch-80)Ground Floor
173	First floor
174	32mm dia PVC ASTM pipe (sch-80)
175	40mm dia PVC ASTM pipe (sch-80)
176	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
177	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
178	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
179	20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
180	25mm dia brass full way valve (Shakti make)
181	32mm dia brass full way valve (Shakti make)
182	40mm dia brass full way valve (Shakti make)
183	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
184	WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR)
185	15mm CP Extension piece
186	125mm CP grating
187	15mm size C.P. flange
188	25mm size brass ball cock with ball
189	Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank
190	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.First Floor
191	Second Floor
192	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-chargeGround Floor
193	First floor
194	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground Floor
195	First floor
196	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ashirvad/Supreme Make)
197	110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
198	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
199	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
200	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
201	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
202	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
203	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
204	110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
205	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
206	Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
207	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
208	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeOne piece commod(Hindware)ELEMENT Cat No.92084.
209	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-chargeHalfpedestal basin(560x450)Hindware No.91049+91115
210	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail
211	Towel ring
212	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf with CP/NP guard rails.
213	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type)
214	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder
215	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½” x 5” CP Shower (Plaza Deluxe Make)
216	Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
217	Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
218	Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover
219	Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
220	Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
221	Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 48.89 x 0.10
222	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround Floor
223	First floor
224	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cmGround Floor
225	First floor
226	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.Ground Floor
227	First floor
228	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cmGround Floor
229	First floor
230	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. of make Rajshri Plastiwood/ Alstone/Aramstrong or euivalant as per direction of Engineer-in-charge. 71 x 0.76 x 2.13
231	Factory made Solid WPC door frame of size 90mmx45mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification. of make Rajshri Plastiwood/ Alstone/ Aramstrong or euivalant as per direction of Engineer-in-charge. 71 x 5.02
232	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in chargeAqua guard pure Chill 120 PSS UV
233	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge100mm dia P.V.C. pipe
234	150mm dia P.V.C. pipe
235	Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
236	Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
237	1 no 50 users RCC septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
238	Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
239	Supply all material labour T&P and providing shoring and shuttering foundation trenches pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge
240	Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
241	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
242	Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
243	Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
244	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
245	R.C.C beams,columns,girder and bressmer etc.
246	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
247	Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
248	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
249	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
250	Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
251	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
252	Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
253	14,000ltr R.C.C. Sump (2.80mx2.0m)Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
254	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1stextra lift of 1.50 m over initial laft.
255	Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all completeas per direction of EIC.
256	Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete asper direction of Engineer-in-charge
257	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specificationand direction of Engineer-in-charge
258	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of theEngineer in charge.
259	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
260	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction ofthe Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height
261	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of theEngineer-in-charge.
262	Rain Water Harvesting SystemSupplying all materials, labour, T&P and fitting and fixing U-PVC, SWR soil waste ventilating pipes and fitting of the following outside diameter conforming to 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including with supply of approved rubber lubricant by non-heat application method as per manufactures specification testing earth work in excavation in all kinds of soil and refilling of trenches all complete as per specification and direction of the Engineer in charge.110mm U-PVC SWR Pipe (Supreme/ashirvad)
263	110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make)
264	110mm U-PVC Socket (Ori Plast/Finolex/Supreme Make)
265	125mm CP grating
266	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge160mm dia P.V.C.
267	Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
268	Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover
269	Construction of 1 Nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessoriesLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyDrilling of 200mm dia bore00 mtr to 30mtr
270	30 mtr to 45mtr
271	Drilling of 150mm dia bore45 mtr to 215.00mtr
272	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 200mm dia P.V.C casing pipes00 mtr to 30 mtrs
273	30 mtr to 50mtr
274	Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80) pipe
275	Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
276	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in chargeBy DTH Rig
277	Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:Rocky terrain with boulder formation for 300m depth
278	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm
279	DOL Control panel
280	40mm dia steel short piece
281	Well cap
282	50mm size CI bracket
283	2.50sqmm flat cable
284	20mm dia rigid UPVC pipes
285	Steel rope with cover
286	Labour charges for lowering including transportation
287	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Office Building Of District Ayurvedic Medical Officer Bhawanipatna Dist. Kalahandi.., Kalahandi-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Office Building Of District Ayurvedic Medical Officer Bhawanipatna Dist. Kalahandi.., Kalahandi-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us