Tender For Development Of Shopping Center Including Providing Of Tree Guard, Bench And Dustbins Sector-2 Bahadurgarh With 03 Years Defect Liability Period. A/C Rs.20.45 Lacs E/M Rs.40900/- T/Limit : 06 Months, Bahadurgarh-Haryana
TDR : 55021050
Tender Notice
BOQ
6 Days Left
Bahadurgarh
Haryana
Tender For Development Of Shopping Center Including Providing Of Tree Guard, Bench And Dustbins Sector-2 Bahadurgarh With 03 Years Defect Liability Period. A/C Rs.20.45 Lacs E/M Rs.40900/- T/Limit : 06 Months
Name of Work:- Development of Shopping Center including providing of tree guard, bench and dustbins Sector-2 Bahadurgarh with 03 years defect liability period. A/c Rs.20.45 Lacs E/m Rs.40900/- T/Limit : 06 Months
Sl. No.
Item Description
1
26.58.1 Supply and installation of garden bench.1 Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm.Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly andinstallation. All materials required to be as per BIS specifications.
2
26.62 PCC tree-guard with appropriate reinforcement with MS bars of 8mm, 6mm and 4mm, having four panels of equal size and specification, consisting of overall height of 1800 mm and overall width of 620 mm including all carriage. All materials required tobe as per BIS specifications..
3
26.76 Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wetwaste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete
4
Job Work Providing and fixing chain swing of size 10’long x 9’high (above ground) frame is made of M.S pipe 2” B class which stay with M.S. pipe 1”B Class frame is connected with M.S. road 25mm dia shaft having fabricated ball bearing NO.3204 shaft, further having 2 Nos. seating belt type seat welded with 8mm thick M.S. complete with painting and fixed in cement concrete block of size 12”x 12” x 15”into 4 legs in mixing of ratio 1:2:4 complete in all respect of entire satisfaction of Engineer-in-Charge.
5
Job Work Providing and fixing of slide 12’long x 16”wide x 5”high (above ground) slide is made of S.S. sheet 18 SWG mounted on M.S. angle 40 x 40 x 4 mm slide 2 Nos. vertical support of M.S. pipe 1”B Class ladder having climbing steps of pipe 1/2” B Class complete with painting and to be fixed in CC blocks 12”x 12” x 15” into 4 legs of mix in ratio 1:2:4.
6
Job Work Providing and fixing of setter sea-saw frame made of 2” dia MS pipe 5” long and 1’-6’ height of ground level with 4 Nos. of Sea-Saw plunks with 1 ½” MS pipe, 8’long sheet made with 16 gauge painted with 1st quality paint and fixing with concrete block 1:2:4 ratio..
7
Job Work Providing and fixing of parallel bar made of 2\\" B class pipe 4' height (Above the ground level) and long 7' 1.5\\" pipe B class.
8
Job Work Providing and fixing of bridge ladder of size 16' long x 2' wide and 6\\" height (above ground level) pipe 2\\" B class and climbing steps. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
