|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) |
| 3 | First class brick work in foundation and plinth including cost of all materials as required complete:- |
| 4 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framedand fixed in position : |
| 6 | Local Teak Wood |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 8 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : |
| 9 | 20 mm dia |
| 10 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete : |
| 11 | 250 x 10 mm |
| 12 | Providing and fixing bright finished brass handles with screws etc. complete : |
| 13 | 125 mm |
| 14 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 15 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. |
| 16 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 17 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: |
| 18 | 125 mm |
| 19 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 20 | 300x16 mm |
| 21 | Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. |
| 22 | Steel work welded in built up section/framed workincluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:- |
| 23 | In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 24 | Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge. |
| 25 | Double charged Stainfree vitrified tiles - Size of tile 1200 mm x 600 mm |
| 26 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc. complete as per direction of Engineer-in-charge : |
| 27 | Single socketed pipe - 110 mm OD |
| 28 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete as per direction of Engineer-in-charge. |
| 29 | 110mm |
| 30 | 15 mm cement plaster on the rough side of single or halfbrick wall of mix: |
| 31 | Cement mortar 1:4 (1 cement : 4 fine sand) |
| 32 | Neat cement punning |
| 33 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:- |
| 34 | With cement mortar 1:3 ( 1 cement : 3 fine sand ) |
| 35 | Distempering with 1st quality washable acrylic distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
| 36 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge |
| 37 | Painting with synthetic enamel paint ( one or more coats ) of required colour of approved brand and anufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. |
| 38 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: |
| 39 | Single socketed pipe - 110 mm OD |
| 40 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: |
| 41 | Bend 87.5° - 110mm |
| 42 | Single equal tee with door - 110x110x110mm |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. - Internal work - Exposed on wall |
| 44 | 20 mm nominal outer dia .Pipes |
| 45 | 40 mm nominal outer dia .Pipes |
| 46 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in -charge. - Internal work - Exposed on wall. |
| 47 | 20 mm dia. nominal bore |
| 48 | 50 mm dia. nominal bore |
| 49 | Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floatscomplete : |
| 50 | 20 mm nominal bore |
| 51 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 52 | 50 mm nominal bore |
| 53 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 54 | 45 cm length - 20 mm nominal bore |
| 55 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 56 | 15 mm nominal bore |
| 57 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved makeconforming to IS:8931. |
| 58 | 15 mm nominal bore |
| 59 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved qualityconforming to IS:8931 |
| 60 | 15 mm nominal bore |
| 61 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 62 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :- |
| 63 | For fixed portion of approved quality: - Powder coated aluminium ( minimum thickness of powder coating of 50 micron ) |
| 64 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- - Powder coated aluminium ( minimum thickness of powder coating of 50 micron ). |
| 65 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- |
| 66 | With float glass panes of 5.5 mm thickness ( weight not less than 13.75 kg / sqm ) |
| 67 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 68 | 10 litre capacity-White |
| 69 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 70 | Providing and fixing Precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning etc. all complete as per direction of Engineer-in-charge.In dark shade using ordinary cement Please Enable Macros to View BoQ information |
