|
| 1 | Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 2 | Material and labour, non-skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc, set jointed in neat grey cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:4), complete all as specified and as directed |
| 3 | M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over and including 15mm thick rendering in CM 1:4, complete all as specified and as directed. |
| 4 | M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc, complete all as specified and as directed. |
| 5 | Dismantling of CI or reinforced concrete/PVC/ drain pipe internal dia 100/75mm , jointed in cement mortar and taking out of trenches if required, complete all as specified and as directed. |
| 6 | S & F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor, complete all as specified and as directed. |
| 7 | S & F PVC (SWR) pipe 75 mm bore single in any type with rubber ring joint laid in wall/trenches /floor, complete all as specified and as directed. |
| 8 | S & F PVC (SWR) bend any radius 110mm bore , complete all as specified and as directed. |
| 9 | S & F PVC (SWR) bend any radius 75mm bore , complete all as specified and as directed. |
| 10 | S & F PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs, complete all as specified and as directed. |
| 11 | S & F PVC(SWR) reducers 75/110mm bore, complete all as specified and as directed. |
| 12 | S & F PVC (SWR) 110mm Junction single (single T) equal or unequal, complete all as specified and as directed. |
| 13 | S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms), complete all as specified and as directed. |
| 14 | S & F of 32 mm Waste fittings, brass, chromium plated for glazed ware sinks,basins,etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed. |
| 15 | S&F in repair 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed, complete all as specified and as directed. |
| 16 | S&F in repair Vitreous china squatting pane, Orissa pattern size 580 x 440mm plate with integral foot rest ( excluding flushing cistern and flush pipe) including 'S' or 'P' trap and cement concrete bedding, complete all as specified and as directed. |
| 17 | S&F in repairs 10 Ltr PVC valve less symphonic action type flushing cistern low level white/coloured with inlet ball valve float , handle, PVC pipe to WC and incl PVC connection 600mm long complete fixed, complete all as specified and as directed. |
| 18 | S&F for Chromium Plated bib taps, cast copper alloy, fancy type with capstan head, crutch or butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15/20 mm dia bore, fixed as in repair, complete all as specified and as directed. |
| 19 | S&F for angular/ stop valves , cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, fixed as in repairs, complete all as specified and directed. |
| 20 | Supply & fix, PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, complete all as specified and as directed. |
| 21 | Supply and fix, grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all as specified and as directed. |
| 22 | Taking up or down steel tubing and connections, size 15 mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and as directed. |
| 23 | Taking up or down steel tubing and connections, size 20mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and directed. |
| 24 | Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and as directed. |
| 25 | Material and labour, galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and as directed. |
| 26 | Taking down cement plaster on brick wall including racking out joints,soffits of slabs/chajja/sunshaded hacking for keys, scrubbing down with water etc, complete all as specified and as directed. |
| 27 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and as directed. |
| 28 | M&L Rendering 15 mm thick on stone walling/brick wall surfaces finished even and smooth without using extra cement in cement mortar 1:6, complete all as specified and as directed. |
| 29 | Perparation of old wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint), complete all as specified and as directed. |
| 30 | Preparation of old painted steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and as directed. |
| 31 | M&L for preparation of new plastered surface and applying three coats of white wash on wall, complete all as specified and as directed. |
| 32 | M&L for preparation of new plastered surface and applying two coats of cement base paint, complete all as specified and as directed. |
| 33 | M&L for preparing old plastered or unplasterd surfaces of walls and applying two coats of cement based paint and removal of rubbish off the premises upto a distance not exceeding 50metres, complete all as specified and as directed. . |
| 34 | Supply and fixing 600x450mm bevelled edge mirror of selected quality mounted on 6mm thick Ac bldg board or commercial pilwood and fixed to wooden plugs with CP brass screws and cup washer etc complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply and fix, towel rail 600 mm long (between flanges), 20mm dia, ‘D’ type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, complete all as specified and as directed. |
| 36 | S&F in repair Soap dish, vitreous China white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screw, complete all as specified and as directed. |
| 37 | Perparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and as directed. |
| 38 | Demolition of brick work or stone / boulder masonry built in CM including all quoins arches, pillars, complete all as specified and as directed. |
| 39 | M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed. |
| 40 | M&L for Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 , complete all as specified and as directed. |
| 41 | M&L Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4, complete all as specified and as directed. |
| 42 | Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level, complete all as specified and as directed. |
| 43 | Material and labour for 100 mm thick cement concrete type B-2 1:2:4( using 40 mm graded aggregate) as in path/pavings/ floor/plinth protection etc laid in bays incl finishing the concrete surface even and smooth without using extra cement, complete all as specified and as directed. |
| 44 | Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and as directed. |
| 45 | S&F 2nd class hard wood plain soild, straight chowkats and frame wrought, framed rebated on soild, rounded or chamfered, put together with pinned at joints, complete all as specified and as directed. |
| 46 | S&F 35 mm thick ,plain,framed,pannelled shutters(any number of pannel),with pannel of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and as directed. |
| 47 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 48 | S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick, complete all as specified and as directed. |
| 49 | Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work, complete all as specified and as directed. |
| 50 | M&L for second class soft wood (Kail) clean swan timber fixed in scantling, complete all as specified and as directed. |
| 51 | Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering, complete all as specified and as directed. |
| 52 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 53 | M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 54 | M & L for Plain Cement concrete 1:3:6 type C2 (40mm graded aggreagate) in foundations, filling and mass concrete, complete all as specified and as directed. |
| 55 | S&F Roof trusses/post (framed ,trussed,purlins,crane gantries,rails and fastening and heavy bracket framing (beam,tee,angles, channel or flat sections) induction distance pieces cleats etc.Fe 410-W (Gde-E-250) quality- A, complete all as specified and as directed. |
| 56 | S & F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and as directed. |
| 57 | S & F 12mm Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and as directed. |
| 58 | Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded aggregate) as in plinth protection/path laid in bays incl finishing the concrete surface even and smooth without using extra cement, complete all as specified and as directed. |
| 59 | M & L for Precast cement concrete hollow block type 1:3:6 using 16 mm graded aggregate as per IS 383 complete masonry exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed. |
| 60 | M&L Rendering 15 mm thick on stone walling ,brick/concrete surfaces finished even and smooth with using extra cement in cement mortar 1:4, complete all as specified and as directed. |
| 61 | M&L Preparation of new or previously untreated Surfaces of any description, over 10cm in width or girth,not otherwise described, priming with red oxide, zinc chrome and aplying two coats of synthetic enamel paint, complete all as specified and as directed. |
| 62 | Dismantling of boarding any description fixed in any position with nails, complete all as specified and as directed. |
| 63 | M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps, complete all as specified and as directed. |
| 64 | Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc, complete all as specified and as directed. |
| 65 | M&L 6mm thick veneered decorative, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed to timber frame work of soft wood 75 mm x 50 mm on ceiling and 50 mm x 50 mm on wall @ 600 mm c/c both side,complete all as specified. Note :-The rate quoted shall be included timber frame work etc as per site requirement required. |
| 66 | S&F in repairs MS decorative curtain rod 20 mm dia covered with coloured PVC layer with decorative ends incl PVC Knobs and MS Bracket both ends, complete all as specified and as directed. |
| 67 | Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for fdn,shafts,pier hole n. exc. 10 sqm on plan and getting out soft/loose soil, complete all as specified and as directed. |
| 68 | M&L for PCC 1:4:8 type D2 using (40mm graded crushed aggregate) as in subbase and in foundation concrete, complete all as specified and as directed. |
| 69 | Formwork to sides of fdn, footing, plinth band, etc, complete all as specified and as directed. |
| 70 | Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed. |
| 71 | Formwork to sides of columns, complete all as specified and as directed. |
| 72 | M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in footing, plinth band , complete all as specified and as directed. |
| 73 | M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in , columns, complete all as specified and as directed. |
| 74 | M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in , beams & lintels, complete all as specified and as directed. |
| 75 | Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealaed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-0 or Fe-410-0 all as specified and directed incl drilling to cement conc surface for fixing of reinforcement in position, complete all as specified and as directed. |
| 76 | All as per above item No. 75 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as spd and directed. |
| 77 | M&L for 40 mm thick damp proof course in PCC 1:2:4 type B-0 Using 12.5 mm graded stone aggregate ,to horizontal or vertical surfaces including necessary formwork, complete all as specified and as directed. |
| 78 | Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed. |
| 79 | M&L for PCC 75mm thick type C-2 1:3:6 (40mm graded aggregate) as in sub base, complete all as specified and as directed. |
| 80 | M&L for Providing, cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, copings, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 81 | M&L for hard core of broken stone or boulders of gauge n.exc.63mm deposited,spread,levelled in layers n.exc.15cm thickness,watered and rammed to a true surface. |
| 82 | M & L Vitrified tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, Incl screed bed 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 83 | M&L for coloured vitrified tiles 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 as in skirting, complete all as specified and as directed. |
| 84 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 20mm thick in cement mortar 1:4, complete all as specified and as directed. |
| 85 | M&L for chequerd cement concrete tiles 20cmx20cm x22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors over and including screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 86 | M&L for preparation of new plastered surface and applying two coats of OBD ,white or tinted ,over a coat of chalk whitening over 2mm th wall putty complete all as specified and directed |
| 87 | Supply only water proofing compound, complete all as specified and as directed. |
| 88 | S & F partition wall of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section, 1.2mtr to 1.8 mtr height of wall having top rails ,bottom rails and middle rail of size 63.50 mm x38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type )with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass incl eaching approved designed with aluminium stiprs/beadings with rubber gasket as per existing or as provided compelte all as specified and directed. |
| 89 | M&L for anodised aluminium snap grid frame work for false ceiling, complete all as specified and as directed. |
| 90 | M&L for non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified and as directed. |
| 91 | S&F 35 mm thick ,plain,framed,pannelled shutters(any number of pannel),with pannel of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and as directed. |
| 92 | S&F 2nd class hard wood 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats, complete all as specified and as directed. |
| 93 | S&F 30mm thick 2nd class soft wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gange etc( without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(b), complete all as specified and as directed. |
| 94 | S&F for 150 mm long Anodised aluminium tower bolt, complete all as specified and as directed. |
| 95 | S&F for 100 mm long Anodised aluminium tower bolt, complete all as specified and as directed. |
| 96 | S&F Aluminium alloy,anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple. Plate300mm long, complete all as specified and as directed. |
| 97 | S&F butt hinges medium weight cold rolled mild steel 100mm, complete all as specified and as directed. |
| 98 | S&F butt hinges medium weight cold rolled mild steel 75mm, complete all as specified and as directed. |
| 99 | S&F aluminium handle cast type anodiised 150mm., complete all as specified and as directed. |
| 100 | S&F aluminium handle cast type anodiised 100mm, complete all as specified and as directed. |
| 101 | S&F brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed. |
| 102 | S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.8mm and fixed with tinned tacks or glavanised wire staples , complete all as specified and as directed. |
| 103 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in Hard/dense soil, complete all as specified and as directed. |
| 104 | Removal of excavated material (soil) exc 250 m but n.exc 500 m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and as directed. |
| 105 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed. |
| 106 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed. |
| 107 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. |
| 108 | Excavation in post holes each n exc 0.5 cum getting out, returning, filing in and removing earth or brocken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m in soft/loose soil and making good surface as per existing surface complete all as specified and as directed. |
| 109 | M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity all as specified in SSR Part I, complete all as specified and as directed. |
| 110 | S & F for Soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and as directed. |
| 111 | S&F, vitreous China ware wash hand basin white of size 550 x 400mm incl CP waste coupling and PVC waste pipe and MS steel brackets, complete all as specified and as directed. |
| 112 | S & F 20mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 113 | S&F 110mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed. |
| 114 | S&F PVC (SWR) gully trap 150 mm, setting and jointing with solvent cement including grating, complete all as specified and as directed. |
| 115 | S&F 75 mm dia PVC (SWR) vent cowl, complete all as specified and as directed. |
| 116 | M&L for Brick work sub class 'B'' bricks (old size) strainght or curved on plan exc 6 m mean radius built in cm (1:4) as in manholes etc, complete all as specified and as directed. |
| 117 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface chanels and drains of manholes etc, complete all as specified and as directed. |
| 118 | M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate in bed plates bends coping benching etc including slighting mouled or chamferred edges complete all as specified |
| 119 | Extra for forming fair finished to drain or channels up to 30 cm inner girth in cement concrete using extra cement including necessary forms/moulds etc, complete all as specified and as directed. |
| 120 | M&L for 15 mm thick cement plaster in CM 1:4 on brick or concrete surfaces mixed with water proofing compound as per manutrs instructions surfaces finished even and smooth without using extra, complete all as specified and as directed.Note : WPC shall be measured and paid separately). |
| 121 | M&L Pre cast RCC 1:2:4 tpe B-1 using 20 mm graded stone aggregate as in manholes cover set in CM 1:6 including necessary form work complete all as specified and shown on drawings (Reinforcement and MS handle shall be measured paid for separately) , complete all as specified and as directed. |
| 122 | Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. |
| 123 | M&L for point wiring for using 1.5 Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 1.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified as directed by engineer in charge. |
| 124 | (a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way |
| 125 | (c) One 3 pin 5 Amp switch socket outlet on independent board |
| 126 | (d) One 3 pin 5 Amp switch socket outlet on same board with accessories |
| 127 | M&L for point wiring for using 2.5 Sqm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc box with suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 2.5 Sqmm nominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches, complete all as specified and as directed |
| 128 | S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed |
| 129 | S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed. |
| 130 | S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box all as specified and as directed |
| 131 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed. |
| 132 | S&F ceiling rose surface bakelite 65x50mm with three terminals, complete all as specified and as directed. |
| 133 | S&F in repairs Distribution Board, SPN 4 Way, Double door complete all as specified and as directed |
| 134 | S&F in repairs Distribution Board, SPN 8 Way, Double door complete all as specified and as directed |
| 135 | S&F in repairs Distribution Board, SPN 12 Way, Double door complete all as specified and as directed |
| 136 | S & F in repairs MCB,DP 40 Amps with breaking capacity 10 KA 240 Volts B curve, complete all as specified and as directed |
| 137 | S & F MCB Single pole 6-32A Amps with breaking capacity 10 KA 240 Volts B Curve, complete all as specified and as directed |
| 138 | Supply and fixing PVC body fresh air fan with PVC blades, ISI marked, 225 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan complete in all respect all as specified and directed. |
| 139 | S& F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 140 | M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 4 sqmm cable and one run of casing capping shall be measured as one RM. |
| 141 | M&L for Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in sevice connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire, with two single core cables flat or circular 16 sqmm 2 core, complete all as specified and as directed. |
| 142 | Supply and fixing 1x20 watt baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting, complete all as specified and as directed. |
| 143 | S&F LED Lamp 9 W 'T' type, complete all as specified and as directed. |
| 144 | S&F LED Lamp 9 W INVERTER type, complete all as specified and as directed. |
| 145 | Supply and fixing angular holder, PVC body complete with wiring etc, complete all as specified and as directed. |
| 146 | M&L for Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in sevice connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire, with two single core cables flat or circular 35 sqmm 2 core, complete all as specified and as directed. |
| 147 | M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including earth work, concrete all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and as directed. |
| 148 | S&F electric water heater, storage Horizontal type outer body Engineering Thermoplastic plastic with puf injected type insulation , Steel tank with glass lined coating inner tank and heating element (copper tube) upto 2 KW capacity 25 litre, 230 volts AC single phase BEE 5 Star rated complete with all accessories such as FR Grade 3 core PVC Cord ,multifunctional safety valve, thermostate, connection piece etc, complete all as specified and as directed. |
| 149 | Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 150 | S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. |
| 151 | S&F in repair Lamp holder/angle batten, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and as directed. |
| 152 | Supplying and fix PVC flat twin core cable PVC insulated aluminium conductor size 10 sqmm 2 core, complete all as specified and as directed. |
| 153 | Supply and fixing in repair Non-metalic Ventilating Exhaust fan 250 mm sweep 230 volts, 50Hz,1200 rpm AC connecting up including provision of cable from ceiling rose/ connector to fan complete all as specified and as directed. |
| 154 | Supply, laying and testing cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium Conductor of size 50 sq mm 3.5 core, complete all as specified and as directed. |
| 155 | Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth for foundation of poles stays,laying of cables up to proper level, complete all as specified and as directed. |
| 156 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed. |
| 157 | Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point, complete all as specified and as directed. |
| 158 | Supply and spread river sand to required width at bottom and top for cable cushioning all as specified in clause 19.75 of SSR part – I (Note :- thickness of sand will be measured after punning) |
| 159 | Supply and lay common burnt bricks of sub class B old size laid at right angle on the cable complete in trenches for cable protection, complete all as specified and as directed. |
| 160 | S & F GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down existing GI/CI pipe for the following sizes complete all as specified and directed by Engr-in-Charge:- . |
| 161 | (a) 20 mm bore size |
| 162 | S&F Gun metal gate valve 20 mm bore with iron hand wheel head ,screwed both ends for iron pipes and fixed complete including dismantling old and unsv, complete all as specified and as directed. |
| 163 | Note:- Schedule of credit 24,242.98 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
