|
| 1 | Nirman karya |
| 2 | All kinds of soil Earth work in excavation by mechanical means (Hydraulic excavator)/manual mcans over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated eart lead upto 50m DSR 2.6.1 |
| 3 | 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) DSR 6.1.2 |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost ofcentering, shuttering finishing and reinforcement with 1:1.5:3 (1cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).DSR 5.3 |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth, consolidating each deposited iayer by ramming andwatering, lead up to 50 and for all lift.DSR-2.25A |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar1:6 (1 cement: 6 coarse sand) DSR-6.42 |
| 8 | steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and Above plinth Thermo-Mechanically Treated bars of grade Fe-500D or more DSR 5.22.6 |
| 9 | 6 mm cement plaster of mix 1:6 (1 cement: 3 fine sand) DSR 13.16.1 |
| 10 | Neat cement punning DSR 13.18 |
| 11 | centering and strutting, propping etc. and removal of form for Lintels, beame cams, plimth beams, girders, bressumers and cantilevers.DSR-5.9.5 |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.DSR-5.9.3 |
| 13 | 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) DSR 13.4.2 |
| 14 | 15 mm cement plaster on rough side of single or half brick wall of mix (1 cement: 6 coarse sand) DSR 13.52 |
| 15 | Providing and applying white cement based putty of average thickness 11 mm, of approved sand and manufacturer,over the plastered wall surface to prepare the surface even andsmooth complete DSR-13.80 |
| 16 | Fimishing with Deluxe Multi surfasce paint system for interiors and exteriors using Primer asmanufacturers specifications Two oror more m coat cts applied on walls @1.255 ltr/10 l/1 sqm over including one coat of Special primer applied @ 0.75 ltr/10 sqm .DSR-13.48.1 |
| 17 | 1:4:8 (1 Cement: 4 coarse sand (zone-II) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)DSR 4.1.8 |
| 18 | Providing and laying Polished Granite stone flooring in required design and patterns, in linearas well as curvilincar portions of the building all complete as per the architectural drawings with 18 mm thickstone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent.11.56.1 |
| 19 | Structurol work rivcted, holted or welded in built up sections, trusse and framed work including catting, hoisting, fising in position and applying a prpiming coat of approved steel 17 primer all compicte.DSR 10.2 |
| 20 | Painting with synibetis enamel paint of approved brand and manufacture of required colout togive an even shade Iwo or more coats on new work over an under coat of suilable shade with ordinary paint of approved brand and manufacture.DSR-13.62.1 |
| 21 | Providing and fixing 151 marked flush door shutters conforming to 1S: 2202 (Part 1) nondecorative type, core of block board construction with frame of tst class hard wood and well matched commercial 3 ply vencering with vertical grains or cross bands and face veneers onboth faces of shutters 30 mm thick including ISI ISI markedarked Sta Stinless Steel butt hinges with necessary ecrews DSR 9.21.2 |
| 22 | Supply and fixingof LED Tube Lightwith batten suitablefor up to 1 X 22 watt LED tube light complete includingtube ete on surface conplete in all respect. (PSI No. 1413-A-саbАA) |
| 23 | S/Wiring of submain with I No. 2.5 Sq.mm. PVC Multi Standerd copper cunductor cable in20 mm dia PVC conduit complete. PSI No.1304-C |
| 24 | Wiring for light point/ fan point exhaust fan point/ call bell point with 1.5 sq.mrm FRLS PVCInsulated copper conductor single core cable in surface / recessed medium clans PVC conduit with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 4.mm. FRLS PVC insulated copper conductor single core cable ete as required.DSR-1.10.3 |
| 25 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker sultable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Single pole.DSR-2.10.1 |
| 26 | Providing and fixing Stainless Steel A 1S1 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x510 mmbowl depth 200 mm 17.10.2.1 |
| 27 | Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Angle back wash basin size 600 x 480mm with single 15mm C.P. brass pillar tap.DSR-17.7.5 |
| 28 | providing and fixing uplasticised PVC connection pipe with brss unions: 45cm length 15mm nominal bore as per DSR no. 18.21.2.1 |
| 29 | Providing standards and fixing C.P. brass long body bih cock of approved quality conforming to 1S weighing not less than 690 gms long 15mm nominal bore DSR no.18.51.1 |
| 30 | Providing stability for and hot fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm dia, having thermal fixing the pipe with & cold water supply, including all CPVC plain & brass threaded fittings, i/c one step CPVC solvent clamps at 1.00 m spacing.This Inciudes jointing of pipes & fittingswith including testing cement and the cost of cutting chases and making good the same including cuting of chases joint and complete as per direction of Engineer in Charge DSR 18.8.1 |
| 31 | Providing stability for and hot fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm dia, having thermal & cold water supply,including all CPVC plain & brass threaded fittings, Ve fixingone step the CPVC pipewith solvent clamps cement at 1.00 and m spacing. This includes jointing of pipes & fittings with the cost of cutting chases and making good the same including including testing ofjoints complete as per direction of Engincer In Charge Concealed work, cutting chases and making good the walls ete.DSR-18.8.2 |
| 32 | Providing and fixing on wall face unplasticised Rigid PVC rain v rain water pipes conforming to I1S: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving DSR 12.41.2 |
| 33 | ADD GST 18% Please Enable Macros to View BoQ information |
