|
| 1 | S & Fixing Jursey barrier suitable for medians, central verge of overall dimension 3045 mm Length X 840 mm Height X 610 mm Bottom Width and having strength of concrete 350 kg / cm2 including reinforced with 16 mm dia. Tor steel at 150mm centre to centre both ways fixed in position and gradient as directed by Engineer-in-Charge. Each Jursey barrier shall have two number hooks at top for handling purpose. |
| 2 | Supplying & fixing of RCC delineators of dia 150 mm and height 950 mm including preparation of concrete surface and painting with synthetic enamel paint of colours as directed by Engineer-in-charge and also providing two strips of reflective tape/reflective paint all round in the grooves over it. |
| 3 | Providing and fixing modular rubber speed breaker made of high-strength recycled rubber/plastic composite, of approved make, design, and colour (black and yellow), having moulded anti-skid surface with embedded reflectors/cat-eyes for night visibility, suitable for heavy vehicular traffic.The speed breaker shall consist of interlocking modular sections, each of approximate size 500 mm (length) × 350 mm (width) × 50 mm (height), including end caps to provide a smooth finish at edges. The modules shall be UV-resistant, weatherproof, and capable of withstanding heavy axle loads. The modules shall be fixed on existing road surface using heavy-duty anchor bolts of minimum 10–12 mm diameter with washers, nuts, and epoxy adhesive, including drilling holes in the pavement, proper alignment, leveling, and ensuring firm fixing without displacement under traffic conditions. |
| 4 | Flexible Spring Post Providing and fixing of Flexible spring post wherein post and base shall be made from Poly urethane. The post shall be semi flat and semi circular in construction. The flat surface of the post shall be used for displaying department name/ logo. The product shall be flexible which help in returning the post to its original position without damaging the product or vehicle. The retro reflective tape applied on the post shall be as per ASTM D 4956 and shall be tested as per clause S2 of ASTM 4956 for flexibility, adhesion and impact resistance of rebound able sheeting. The message area for printing retro reflective area shall be 100 X 400 mm. The height of the post shall be 750 mm, the width of the post shall be 120 mm. The flexible spring post shall be applied in gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc. or as desired by site engineer. |
| 5 | Supplying, fixing Plastic Link Chain made out of special grade engineering Plastic with UV stabilized Colours. Red / White and Yellow/ Black Combination as directed by Engineer-in-Charge. Reflective tape is fixed on the chain to give maximum visibility during night time. |
| 6 | Supply, fixing and installation of road rumble strips made out of ABS (Astronitrilite Butadiene Styrene material) length 500mm, width 125mm and height 25mm. Colour Yellow or Block as directed by Engineer-in-Charge. Rumble stripto be fixed to road surface with special nails and epoxy as per manufacturer specifications. Approved makes: Kohinoor, Dark eye, Safe zone or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 7 | Supply of stanchion post made of stainless steel (grade 202), height 950mm (minimum), Base dia 300 mm, Pole dia 50mm, provided with belt of length 1.5 mtr, weight 7 kgs with suitable fixing arrangements for belt on the posts. The belt shall have printed matter \\"Delhi Cantonment Board\\". |
| 8 | Supplying, Fixing, Installation of Solar Stud Waterproof, energy-saving and Eco-friendly Solar Road Stud made out of solid aluminum-alloy shell powered by solar cells and panels. Ideal signal product for highways, parking lots, roads and similar isolated or stand-alone traffic applications :Technical Specifications: 1.Aluminum-alloy shell2.Solar panel 0.3 Watt 45x65mm3. Ni-Mh 1.2V/600mAh rechargeable battery.:4. Six Super bright LEDs with 10,000 to 18,000 mcd (Millicandela).5. Color: yellow, red, blue,green and white . 6. Working time 24 hours successively after the battery is fully charged.7. Charging time: five to six hours/day.8. Solar energy-based power source. 9. . High visibility LED's for safe night driving. 10.. Size: 125 X 120 x 22mm with Shank of 65 mm. Approved makes: Kohinoor, Avery Dennison, 3M, Dark eye or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 9 | Road Delineators Providing and fixing of standard Metal Delineator as per IRC 79:2019 consisting of retro reflective area in white colour using Microprismatic retro reflective sheeting on each side conforming with IRC 67-2012 and meeting the coefficient of retro reflection values as per Class C table specification. The delineator shall be painted with only black colour powder coat of minimum 40 microns thickness, on top of retro reflective sheeting only in white colour shall be pasted on both sides. The structure shall have height not less than 800 mm above ground, width not less than 100 mm and shall extend not more than 300 mm below ground while being installed. The delineator shall have grooves across the length to make the reflective sheet vandal proof. The delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc or as desired by site engineer. The product shall be provided with 3 year outdoor warranty report tested in India condition as per IRC 67: 2012 requirement.In case of soft ground, a proper foundation may be provided as per approved design. In case foundation is required to be provided, the items of excavation and foundation concrete are required to be measured and paid separately |
| 10 | Supplying, fixing, installation of road delineator, Dual directional road side delineator 600mm long made out of 16 gauge ,MS Rectangular Pipe 24x65mm stove enameled and baked at 120degree C powder coated. Head made out of CP plastic, rectangular mount, with flat face provided with High Intensity prismatic reflective yellow colour sheeting of size 60x100mm 2nos each side and with two additional reflective strips of 25mm wide (Type IV). Fixed to ground as per manufacturer instructions including providing cement concrete for fixing grade(1:1.5:3) (1 cement : 1.5 coarse sand : 3 coarse aggregate) Makes :Kohinoor, Dark eye or equivalent. confirming to IRC specifications as approved by the Engineer-in-charge (Company certificate for reflectivity of retro reflective tape & grade be provided). |
| 11 | Supplying, Fixing, Installation of Convex mirror, Dia 800 mm , Polycarbonate mirror and ABS body, fixed on pole 75mm outer dia. Height of pole 1.95 mtr., , fixing firmly to the ground with cement concrete of grade of 1:1.5:3 complete as directed by Engineer-in-charge. Makes :Kohinoor, Dark eye or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 12 | Supplying, Fixing, Installation of Convex Mirror, Dia 1000 mm, Polycarbonate mirror and ABS body, fixed on pole 75 mm outer dia. Height of pole 1.95 mtr., fixing firmly to the ground with cement concrete of grade of 1:1.5:3 complete as directed by Engineer-in-charge. Makes : Makes :Kohinoor, Dark eye. or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 13 | Supplying and fixing of reflective road studs/ raised pavement markers (RPM) with twin shank. Raised pavement markers made out of ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and fixed to the road surface using the adhesive. The reflective raised pavement markers shall also confirm to the MORTH circular No.RW/NH.33023/10/97-DO.III and the length, height and width of the body shall not be less than 95 mm, 15 mm and 85 mm. Lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The slope or retro-reflectory surface shall be 35+5 degree to base. Two cylindrival Polymer Shanks of not less than 15 mm diameter and not less than 25 mm length should be there in the RPM body. Fixed to ground as per manufacturer instructions including using epoxy material. Make : Makes :Kohinoor, Avery Dennison, 3M or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 14 | Supplying of retro reflective sheeting roll, 1 inch wide and 150 ft. in length, Type - XI, micropresmatic reflective sheeting as per IRC-67 of any colour white, red, yellow as directed by Engineer-in-charge, Make : 3M or Avery Dennison. or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 15 | Supplying of retro reflective sheeting roll, 2 inch wide and 150 ft. in length, Type - XI, micropresmatic reflective sheeting as per IRC-67 of any colour white, red, yellow as directed by Engineer-in-charge, Make : 3M or Avery Dennison or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 16 | Supplying of retro reflective sheeting roll, 3 inch wide and 150 ft. in length, Type - XI, micropresmatic reflective sheeting as per IRC-67 of any colour white, red, yellow as directed by Engineer-in-charge, Make : 3M or Avery Dennison or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 17 | Supplying of retro reflective sheeting roll, 4 inch wide and 150 ft. in length, Type - XI, micropresmatic reflective sheeting as per IRC-67 of any colour white, red, yellow as directed by Engineer-in-charge, Make : 3M or Avery Dennison or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 18 | Supplying , fixing and installation of median marker made of tough, impact resistant, black colour, plastic material and manufactured using injection moulding process. The body shall be a rigid isosceles trapezoidal structure of height not less than 100 mm and shall rest on rectangular base of length & breadth not less than 15 cm and 10 cm respectively. The median marker shall have rectangular shape yellow coloured retro reflective sheeting confirming to IRC-67 micro prismatic sheeting on both side of surfaces. Makes: Kohinoor, Avery Dennison, 3M or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 19 | Providing and fixing retro-reflectorised chevron sign boards of size 450 mm x 600 mm made of micro prismatic reflective sheeting as per IRC, Type- XI , fixed over aluminium panel sheeting of 3 mm thickness, fixed over a back support frame of 25x25x3 mm thick MS angel fixed at deginated locations as directed by Engineer-in-charge. Makes :Kohinoor, Avery Dennison, 3M or equivalent confirming to IRC specifications as approved by the Engineer-in-charge |
| 20 | Flexible Median Marker Providing and Fixing of Flexible Median Markers as per IRC 79:2019 which shall be made of combination of tough, high impact resistant molded thermoplastic body along with floroscent yellow colour retro-reflective Class C sheeting with minimum exposed reflective area 285 square mm and with rebound property. The reflective sheeting should confirm to Class C Yellow sheeting as per IRC 67-2012. The flexible median marker shall have overall height of minimum 180 mm, width of minimum 120 mm, body thickness of minimum 2.0 mm and shank depth of minimum 30mm. The retro-reflective sheeting shall be on both sides of the Flexible Median Marker and shall be edge protected with no exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc. The edge of sheeting should not come out easily by putting nails, sharp objects etc. The logo of the manufacturer shall be embossed on either side of the body. The product design has to with stand all natural impacts and should not get damaged if any pedestrian stamp on top of it intentionally or unintentionally. The product should bend up to 90 degree on both sides without breakage or damage. The Flexible Median Marker shall be tested from Government Lab for reboundability and tensile test as per IRC 79 :2019. |
| 21 | Supplying , fixing of vertical post (road delinators) Delineator consisting of minimum retro reflective exposed area of 125 sqcm white colour on top & 45 sqcm red colour in rectangular portion at the bottom each side with micro prismatic retro reflective sheeting conforming with IRC 67: 2012 and coefficient of retro reflection values as per IRC Type XI. The reflective portion should have the shapes of circle, square and rectangle. Model number and the name of the manufacturer should be clearly visible on the delineator. The Vertical Guide Post Core shell shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body of flourescent orange colour & the inner core shall be of primer coated MS hollow section with steel thickness minimum 1.0mm on which retro reflective sheeting is pasted on both sides. MS Hollow section shall be of overall height not less than 1200mm in which the height of post shall be 800 mm above the ground and bottom 400mm portion to be grouted below ground level and fixed formly in the ground with rich cement concrete 1:1½:3 Delineator should be as per drawing enclosed. , Makes :Kohinoor, Avery Dennison, 3M or equivalent confirming to IRC specifications as approved by the Engineer-in-charge (Company certificate for reflectivity of retro reflective tap & grade be provided) |
| 22 | Traffic Cone Traffic Cone- Provision of red fluorescent with white reflective sleeve of Class B retro reflective sheeting as per IRC-67-2012 traffic cone made of low density polyethylene (LDPE) material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 3.4 kg in weight, placed at 1.5 m interval, all as per BS 873 Please Enable Macros to View BoQ information |
