|
| 1 | Sch 'A' Part-I (Building Work)Note : This schedule is pre-priced by MES and the pre-priced rate indicated are under Col. 5. |
| 2 | Total amount of Sch 'A' Part II (Site clearance, excavation and earth work) |
| 3 | Total amount of Sch 'A' Part III (Lightining Conductor) |
| 4 | Total amount of Sch 'A' Part IV (Road Path and culvert) |
| 5 | Total amount of Sch 'A' Part V (Area Drainage) |
| 6 | Total amount of Sch 'A' Part VI (Sewage Disposal) |
| 7 | Total amount of Sch 'A' Part VII (External Water Supply) |
| 8 | Total amount of Sch 'A' Part VIII (External Electrification) |
| 9 | Sch 'A' Part - X (Miscellaneous Items for B/R & E/M Works)Note - This Schedule is not pre-priced by MES and the pre - priced rate indicated as \\"Rs 0.00 under col.5 siginifies this fact only. |
| 10 | LIGHTINING CONDUCTOREarthing complete with copper earth plate electrode of size 600x600x3.15mm buried directly in ground (earth pit not less than 1.5 mtr below normal ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected to copper earth strip 20x 3 mm by means of bolts, nuts, check nuts of galvanised iron or steel including excavation and earth work in any type of soil, charcoal salt filling 15cm around the earth plate as shown electrical plate No 3. 20mm bore, GI watering pipe medium grade 1.50 mtr long and GI protection pipe light grade 32mm dia from earth pit to main board including making pit with PCC 1:3:6 type C1 and pre cast RCC cover 40mm thick, reinforced with 8mm dia TMT bars @ 100mm c/c both way swith lifting handles and funnel etc including testing complete all as specified and directed. |
| 11 | Supply & fix GI strip 32mm x 6 mm buried in ground complete all as specified and directed . |
| 12 | INTERNAL ELECTRIFICATION FLAME PROOFSupply and fixing LED light fitting 1x8 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed. |
| 13 | Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed. |
| 14 | S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250 V complete |
| 15 | S&F Flame proof swith socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete |
| 16 | FIRE FIGHTINGSupply and Installation of petrol driven push button start high capacity portable fire pump capacity 1100 -1600 LPM with 90 degree twin discharge pots confirming toIS12717/JSS:4320-06-2006 or equivalent specification complete all as specified and directed with the following accessories for commencing operation in emergency till arrival of the fire Brigade.i) Fire delivery hose(IS636) of 63 mm dia having 30 m length - 08 Nosii) Standard Nossle(Branch Pipes) - 02 Nosiii) Suction Hose (2.5 m Long) - 02 Nosiv) Suction wrench-01 Pairv) Metal strainer -01 Novi) Bracket Strainer - 01 No |
| 17 | SUMMER APPLIANCESSupply, installation, commissioning of water cooler partially stainless steel electric driven single phase having approx storage capacity 40 ltr and nominal cooling capacity 40ltr/Hr complete all as specified and directed. |
| 18 | Supply and installation of Dessert cooler electric fan driven (Single phase) having normal air flow capacity of 4000 Cum/ hour complete with exhaust fan motor 450/430 mm sweep RPM 1350 and submerisble water lifting pump of capcity 2.80 m head 230 Volt AC including locally fabricated cabinet with three side panels front top and tank including vertical mention made out of 22 SWG PGI sheet of size not more than 48\\" x 29\\" x 25\\" with front side chequerd mess with manually operated horizontal and vertical fins, including 4 way PVC distributer, PVC pipe 3 to 4 mtr for spray water, wood wool pads, plastic electrical box having two Nos 5 amps piano switch and indicator including suitable size stand for outdoor mounting of dessert cooler complete with electric wiring for fan & pumps controlled separately complete all as specified and directed. |
| 19 | Voltage stabiliser for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 280 V with output viltage stabilized at 230 V with accuracy ± 2.5% and of capacity 1.0 KVA (for water coolers) complete all as specified and directed. |
| 20 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 Volts complete all as specified and directed. |
| 21 | GEYSERSupply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection pipe etc. complete all as specified and directed. |
| 22 | M&L for Point wiring complete for power point controlled by one switch with PVC insualted and unsheathed FRLSH cable 2.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof /wall/ floor slab and ceiling, suitable for modular switch with modular metal flush box with inner and outer cover plate & frame etc of requied colour complete, including 2.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete for one 3 pin socket out let 15 Amps independent, complete all as specified and directed.Note :- In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm bore shall be used without any extra cost. One circuit controlled by max one points only. |
| 23 | S&F Switch piano, flush type single pole, one way 16 Amp complete all as specified and directed. |
| 24 | S&F Socket outlet 2 in 1, 5 pin, 6 and 16 amp flush type complete all as specified and directed. |
| 25 | EXTERNAL WATER SUPPLYSupply & laying Pipe ductile iron S/S including specials class \\"K-7\\" supplied and laid complete 150 mm (6\\") dia including rubber gasket joint complete all as specified and directed. |
| 26 | Supply & laying Pipe ductile iron S/S including specials class \\"K-7\\" supplied and laid complete 100 mm (4\\") dia including rubber gasket joint complete all as specified and directed. |
| 27 | Construction of fly ash brick masonry valve pit chamber of size 1020 mm X 1020 mm X 1020 mm (internal dimensions) including necessary excavation & earth work, 100 mm thick PCC (1:4:8) type D-2 as in foundation, 230 mm thick fly ash brick work in cement mortar (1:4), 12 mm thick rendering in cement mortar (1:4) on internal surface of valve pit and mild steel sheet cover of 6 mm thick and angle iron of size (50 x 50 x 6) mm frame around of valve pit, sheet welded on all four corners, locking arrangement with pad lock of size 50 mm brass, 6 levers and in duplicate key (Make - Godrej or equivalent make as approved by GE complete) including two coat of approved synthetic enamel paint over one coat of red oxide primer on prepared steel surface complete all as specified and directed. |
| 28 | Construction of fly ash brick masonry valve pit chamber of size 900 mm X 950 mm X 950 mm (internal dimensions) including necessary excavation & earth work, 100 mm thick PCC (1:4:8) type D-2 as in foundation, 230 mm thick fly ash brick work in cement mortar (1:4), 12 mm thick rendering in cement mortar (1:4) on internal surface of valve pit and mild steel sheet cover of 6 mm thick and angle iron of size (50 x 50 x 6) mm frame around of valve pit, sheet welded on all four corners, locking arrangement with pad lock of size 50 mm brass, 6 levers and in duplicate key (Make - Godrej or equivalent make as approved by GE complete) including two coat of approved synthetic enamel paint over one coat of red oxide primer on prepared steel surface complete all as specified and directed. |
| 29 | Construction of fly ash brick masonry valve pit chamber of size 450 mm X 450 mm X 450 mm (internal dimensions) including necessary excavation & earth work, 100 mm thick PCC (1:4:8) type D-2 as in foundation, 230 mm thick fly ash brick work in cement mortar (1:4), 12 mm thick rendering in cement mortar (1:4) on internal surface of valve pit and mild steel sheet cover of 6 mm thick and angle iron of size (50 x 50 x 6) mm frame around of valve pit, sheet welded on all four corners, locking arrangement with pad lock of size 50 mm brass, 6 levers and in duplicate key (Make - Godrej or equivalent make as approved by GE complete) including two coat of approved synthetic enamel paint over one coat of red oxide primer on prepared steel surface complete all as specified and directed. |
| 30 | EXTERNAL ELECTRIFICATIONSupply and fix sheet metal enclosure(street light timer panel) factory made with synthetic enamel painting complete and fix to the LT pole with suitable size FI Clamp including time switches Digital type 24 hour 240 V single phase of Max load 6 KW with contactor 32/DP with One MCB 40/SPN rating complete all as specified and directed. |
| 31 | DG SetSilent/containerzed diesel engine driven generating set complete to give an output of 40 KVA AC 415 Volts, 50 Cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM Pads \\"B\\" series) complete in all respect with and including accessories and components as specified below including sound proof integral accoustic enclosure for 40 KVA Gen Sets ECO friendly and as per Ministry of Environment, forests notifaction 17 May 2002 complete including, emergency stop button, illumination inside canopy, Temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722, AMF type with relay panel for automatic starting on mains failure.(a) Diesel Driven Engine (Prime mover):- Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 40 KVA alternator, water cooled conforming to BSS- 649 rated for continuous running diesel engine suitable to FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for any one hour in any 12 hour running, complete with and including following accessories:-i) Fuel filterii) Governor ( Electronic)iii) Complete battery set with lead & lugs as recommended by manufacturer.iv) Lubricant oil coolerv) Lubricant oil pump.vi) Lubricant oil filtervii)Digital oil pressure gaugeviii) Any other parts as prescribed by manufacturer for its good functional performance.ix) Battery charging alternator suitable for charging Batteries.x) Dry type air filter |
| 32 | xi) MS channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads.xii) Coupling guard.xiii) Exhaust pipe fully extended to exhaust gases outside the acoustic enclosure including silencer and necessary insulation lagging all as per manufacturer's recommendations.xiv) Fuel tank of sheet steel and of capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with caliberated scale on outer surface, floor mounted with suitable angle iron supports.xv) Digital type RPM meter with hour meter.xvi)Self starter of suitable sizexvii) Turbo chargerxviii) In line mono blockxix)Fuel pumpxx)Digital type Coolant temp gauge.xxi)Self starter with auto electric start accessoriesxxii) Engine safety low lubricant oil pressure and high coolant temperature.xxii) Test certificate(b) Alternator:- 40 KVA at 0.8 PF self excited self regulated with fast response thyristor type, 3 phase 50 Hz 415 Volts, 1500 RPM 4 wire alternator, screen protected drip proof free from commutation problem, continuous rating confirming to BS-649 complete with automatic voltage regulator output voltage regulated between + 1% of set volts from no load to full load.(c) Manufacturer maintenance & operation manual of Gen Set - 02 Set. |
| 33 | (d) AMF Panel :- AMF control panel 24 volt DC system complete with internal wiring and levelling floor type totally enclosed made of steel metal suitable for the above Generator Set incorporating the following:-i) Voltmeter digital type 0-500 Volts with selector switch - 01 Setii)Ammeter digital type upto 200 Amps with CT's and selector switch - 01 Setiii) Under/ over voltage relay - 01 Noiv) Digital electronic timer - 01 Nov) Frequency meter digital type - 01 Novi) Indicating lamp LED based with toggle switches - 01 Set of threevii)KWH meter three phase digital type - 01 Noviii) PF meter three phase digital type - 01 Noix) Safety alarm against high water temperature and low oil pressure.x) Bypass arrangement with rotary type switch AC-4 Pole, 100 Amps rating to isolate AMF panel at the time of low voltage and from maintenance point of view.xi) Auto change over complete with suitable size power contactor of size upto 100 Amps with tripping relay complete.xii) Engine starting relay.xiii) Frequency stabilizer auto mechanism to maintain the supply.xiv) Battery charger suitable to charge the battery of 12 V/24 Volt DC with buck/ boost system - 01 No(e) Supply & install of Acoustic Enclosure suitable for 40 KVA DG set as underi) Fabricated out of CRCA sheet of suitable thickness as per manufacture design. Polyster based powder coated internaly and externaly with lockable type door handle. All nuts and handles shall be zinc coated. ii)The doors are gasketed with EPDM gaskets. |
| 34 | iii) Sound proofing with high quality rock wool/ mineral wool confirming to IS 8183 of 50mm thickness and density at 96 Kg/M3 covered with fiber glass cloth and perforated powder coated sheet specialy designed allenuators (Sound controller) at air entry and exit of the container noice level shall be not exceed 75 Db at 1 meter distance as per CPCB/Government of India Norms.iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower.v) Emergency stop push button outside the container.vi) Provn of light inside the canopy i.e. providing LED light fitting 1 x20 Watt with wiring and control switch.(f) MOUNTING ARRANGEMENT- Prime mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in sheet metal providing common bed for engine and alternator directly coupled together the base frame has provision for grouting on foundation bolt as well as fixing on vibration mounts provision is made in base frame for tilting arrangement of DG set as recommended by manufacturer. The base frame shall have provision of lifting hook for convenient lifting of complete set ie along the canopy engine and alternator. |
| 35 | M&L for earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm thick by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4), type B1 using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 3 mm thick duly painted with two coats of synthetic enamel paint with two coats of synthetic enamel paint overone coat of red oxide zinc chrome primer hinged with and including 6 mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering, 15 mm dia light grade GI pipe for lead protection in and including alternate layer of charcoal dust and common salt complete all as shown in electrical palte No. 3 connected to earthing test point all as specified and indicated including testing on completion including retrieving of old GI earth plate, CI Cover, GI pipes, angle iron frame existing earthing, complete all as specified and directed. |
| 36 | DEMOLITIONDemolition of Reinforced cement concrete any description and in any position complete all as specified and directed. |
| 37 | Demolition of brick/ Stone work built in cement mortar complete all as specified and directed. |
| 38 | Dismantiling mild steel work of any description complete all as specified and directed. |
| 39 | Separating, scraping and cleaning of reinforcement complete all as specified and directed. |
| 40 | Demolition of cement concrete in ground floor n.exc 15 cm thick, complete all as specified and directed. |
| 41 | Dismantling of old barbed wire from existing fencing, complete all as specified and directed. |
| 42 | Dismantling posts or struts RCC any section including taking out embedded portion from concrete and making good disturbed portion, complete all as specified and directed. |
| 43 | Dismantling posts or struts RCC any section including taking out embedded portion from natural ground and making good disturbed portion, complete all as specified and directed. |
| 44 | Dismantling fencing wire mesh any type, complete all as specified and directed. Please Enable Macros to View BoQ information |
