Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SUPPLY OF FITTINGS BLOCK FORGED-CARBON STEEL FOR AG & UG PIPING (LOT-4) FOR MSB, PFCC, GDS, FF FOR NREP PROJECT incuding TPI charges as specified in Material Requisition. |
| 2 | ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 3 | ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 4 | ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 5 | ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 6 | ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 7 | ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 8 | ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 9 | ELB 90 DEG CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 10 | ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 11 | ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 12 | ELB 90 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 13 | ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 14 | ELB 90 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 15 | ELB 90 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 16 | ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 17 | ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 18 | ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 19 | ELB 90 DEG CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 20 | ELB 45 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 21 | ELB 45 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 22 | ELB 45 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 23 | ELB 45 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 24 | ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 25 | ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 26 | ELB 45 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 27 | ELB 45 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 28 | ELB 45 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 29 | ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 30 | ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 31 | ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 32 | ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 33 | ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 34 | FCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 35 | FCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 36 | RCPL CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 37 | RCPL CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 38 | RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 39 | RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 40 | RCPL CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 41 | RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 42 | RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 43 | RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 44 | RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 45 | RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 46 | RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 47 | RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 48 | CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 49 | CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 50 | CROSS CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 51 | CROSS LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 52 | CROSS LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 53 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 54 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 55 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 56 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 57 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 58 | TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 59 | TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 60 | TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 61 | TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 62 | TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 63 | TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 64 | TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 65 | TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 66 | TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 67 | TEE LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 68 | TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 69 | TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 70 | TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 71 | TEE LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 72 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 73 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 74 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 75 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 76 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 77 | TEE CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 78 | TEE CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 79 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 80 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 81 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 82 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 83 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 84 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 85 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 86 | HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 87 | HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 88 | HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 89 | HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 90 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 91 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 92 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 93 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 94 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 95 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 96 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 97 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 98 | HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 99 | HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 100 | HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 101 | HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 102 | HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 103 | HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 104 | HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 105 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 106 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 107 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 108 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 109 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 110 | HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 111 | HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 112 | NIPPLE CS (CAUSTIC), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 113 | NIPPLE CS (NACE), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 114 | NIPPLE CS, B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 115 | NIPPLE CS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 116 | NIPPLE LTCS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 117 | NIPPLE LTCS (NACE), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 118 | NIPPLE CS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIA, REQUIRED IF MOC IS OF PIPE ELSE, FORM IIIC FOR FORGED MOC |
| 119 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 120 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 121 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 122 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 123 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 124 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 125 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 126 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 127 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 128 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 129 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 130 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 131 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 132 | HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015 |
| 133 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 134 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 135 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 136 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 137 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 138 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 139 | ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 140 | ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 141 | ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 142 | ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 143 | ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 144 | ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 145 | ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015 |
| 146 | ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015 |
| 147 | FCPL LTCS (NACE), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 148 | RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 149 | RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 150 | RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 151 | RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 152 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 153 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 154 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 155 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 156 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 157 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 158 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 159 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 160 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 161 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 162 | TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 163 | SUPPLY OF FITTINGS BLOCK FORGED-CARBON STEEL FOR AG & UG PIPING (LOT-4) FOR MSB, PFCC, GDS, FF FOR NREP PROJECT incuding TPI charges as specified in Material Requisition. |
| 164 | ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 165 | ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 166 | ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 167 | ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 168 | ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 169 | ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 170 | ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 171 | ELB 90 DEG CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 172 | ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 173 | ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 174 | ELB 90 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 175 | ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 176 | ELB 90 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 177 | ELB 90 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 178 | ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 179 | ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 180 | ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 181 | ELB 90 DEG CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 182 | ELB 45 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 183 | ELB 45 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 184 | ELB 45 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 185 | ELB 45 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 186 | ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 187 | ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 188 | ELB 45 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 189 | ELB 45 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 190 | ELB 45 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 191 | ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 192 | ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 193 | ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 194 | ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 195 | ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 196 | FCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 197 | FCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 198 | RCPL CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 199 | RCPL CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 200 | RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 201 | RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 202 | RCPL CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 203 | RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 204 | RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 205 | RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 206 | RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 207 | RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 208 | RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 209 | RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 210 | CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 211 | CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 212 | CROSS CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 213 | CROSS LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 214 | CROSS LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, OPPOSITE ENDS SHALL BE OF SAME SIZE |
| 215 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 216 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 217 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 218 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 219 | TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 220 | TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 221 | TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 222 | TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 223 | TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 224 | TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 225 | TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 226 | TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 227 | TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 228 | TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 229 | TEE LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 230 | TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 231 | TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 232 | TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 233 | TEE LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 234 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 235 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 236 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 237 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 238 | TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 239 | TEE CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 240 | TEE CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 241 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 242 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 243 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 244 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 245 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 246 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 247 | HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 248 | HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 249 | HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 250 | HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 251 | HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 252 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 253 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 254 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 255 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 256 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 257 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 258 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 259 | HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 260 | HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 261 | HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 262 | HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 263 | HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 264 | HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 265 | HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 266 | HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 267 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 268 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 269 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 270 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 271 | HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 272 | HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 273 | HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED. |
| 274 | NIPPLE CS (CAUSTIC), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 275 | NIPPLE CS (NACE), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 276 | NIPPLE CS, B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 277 | NIPPLE CS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 278 | NIPPLE LTCS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 279 | NIPPLE LTCS (NACE), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 280 | NIPPLE CS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIA, REQUIRED IF MOC IS OF PIPE ELSE, FORM IIIC FOR FORGED MOC |
| 281 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 282 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 283 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 284 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 285 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 286 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 287 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 288 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 289 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 290 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 291 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 292 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 293 | HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 294 | HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015 |
| 295 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 296 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 297 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 298 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 299 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 300 | ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 301 | ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 302 | ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 303 | ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 304 | ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 305 | ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 306 | ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 307 | ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015 |
| 308 | ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015 |
| 309 | FCPL LTCS (NACE), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043 |
| 310 | RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 311 | RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 312 | RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 313 | RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 314 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 315 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 316 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 317 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 318 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 319 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 320 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 321 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 322 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 323 | TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 |
| 324 | TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE <=1 1/2\\" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2\\" TO 6\\",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042 Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
