|
| 1 | Annual maintenance of internal electrical installations as per inventory terms & conditions attached. |
| 2 | Rewinding of ceiling fan of size 1200 / 1400mm sweep i/c removing from ceiling dismantling rewinding varnishing greasing oiling reassembling re-installation connections & testing complete as required. |
| 3 | Rewinding of exhaust fan of size 300mm sweep i/c removing from Installation, dismantling rewinding, varnishing greasing oiling reassembling reinstallation connection & testing complete as required. |
| 4 | Supply of 300mm sweep ( 12\\") heavy duty exhaust fan suitable for working on 230 volt 50 Hz. AC supply + 10% 1350 RPM on the existing wall opening, connection, testing etc. as reqd. |
| 5 | Supplying & Replacement of following items ( ISI marked) suitable to operate on 240 volts A.C. supply, testing etc. as reqd. |
| 6 | 5/6Amp. Switch (Piano type) |
| 7 | 15/16Amp. Switch (Piano type) |
| 8 | 5/6Amp. Bell push (Piano type) |
| 9 | 3 pin 5/6Amp. socket outlet |
| 10 | 6 Pin 15/16 Amp. Socket outlet |
| 11 | Call bell / buzzer |
| 12 | PVC batten holder |
| 13 | Electronic fan regulator |
| 14 | 5 Amp. To 32 Amp. S.P. MCB (C) Curve – 10 KA |
| 15 | 40 Amp Isolator. |
| 16 | 2.5 mfd. Capacitor |
| 17 | Powder coated die cast /Extruded aluminum Body (Thickness ≥ 1.20 mm) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver& electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineerin-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). etc complete as req along with dismantaling of existing including buyback.a) 18-22W (4feet long) |
| 18 | Supply of 1.5 sq.mm copper conductor single core cable PVC insulated 1.1 KV grade i/c connection, inter connection, testing etc. complete as reqd. |
| 19 | Supply of 4 sq.mm copper conductor cable single core cable PVC insulated 1.1 KV grade i/c connection, testing etc. Complete as required. Please Enable Macros to View BoQ information |
