|
| 1 | CIVIL PORTION OF WORK:-Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(A) Internal Paver Road |
| 2 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not Exceeding 23 cm .in depth with all lead and lift including cost, Conveyance, Loading, unloading, Royalties and taxes of all materials, cost of all labour. labour cess, sundries, T&P required for work etc .complete in all respect as per direction by the Engineer in charge.(A) Internal Paver Road |
| 3 | Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site laying in uniform layers with Paver in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(A) Internal Paver Road |
| 4 | Plain Cement concrete of proportion (1:2:4) using 12mm (1/2 \\") size hard granite crusher broken chips of approved quality from approved quarry and including lowering laying concrete watering and curing etc. complete to the required levels laid in layers not exceeding 15cm. thick including cost and conveyance, royalities and taxes of all materials and cost of all labour with T&P required for the work complete.(A) Internal Paver Road |
| 5 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018.(A) Approach Road |
| 6 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.(A) Labour Room |
| 7 | Supplying, fitting and fixing of openable UPVC door with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.(A) Labour Room |
| 8 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete(A) Labour Room |
| 9 | Finishing wall surface of wall with Cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scoffolding staging charges with cost of all materials, taxes, labour, T&P etc. complete.(A) Labour Room |
| 10 | Primering one coat with any approved shade of primer of approved make over the plastered surface of walls including cost, conveyance and taxes of all labour with T&P required for the work etc. complete as directed by the Engineer-in-charge. (A) Labour Room |
| 11 | Wall painting two coats with plastic emulsion paints of approved shade on new work by means of brush including watering and curing etc. complete including cost of paint with taxes and cost of all labour with T & P required for the work etc. complete.(A) Labour Room |
| 12 | Fixing of granite tiles of size in floor laid on 12mm thick bed of cement mortar in (1:3) cm. jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing, polishing etc. complete including cost of all materials carriage, conveyance, royality other taxes, labour with T & P etc. complete in all respect.(A) Labour Room |
| 13 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the work etc. complete and as per direction of Engineer-in-charge.(A) Labour Room |
| 14 | Providing fitting and fixing up partition walling aluminium anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL Section 4660 as tapered clip and jointing angle no. 1855 etc . excluding cost of 12mm thick perlaminated board (ISI) as per direction of engineer in charge.(A) Labour Room |
| 15 | Supplying, cutting, straightening of steel HYSD (Fe- 415) conforming to (IS- 1786) with bending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for providing fan hooks hosting lowering & laying steels including cost conveyance, taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges (payment will be made on weight of MS rod or tor steel only basing on the co- efficient of MS rod or tor steel bars approved by SAIL / TATA / competent authority and (No separate payment will be made towards the cost of binding wires over lapping, wastage, coupling, welded, joints , spacer bars, chairs stays, hangers and annealed steel wires or other methods for binding and placing etc.).(A) Labour Room |
| 16 | Providing lifting, hoisting and laying R.C.C. of M-20 Grade with 20mm and down grade C.B. chips to base of columns and footing / Plle cap / Precast slab or in places as shown in the drawing for all floors with 20mm and down graded size black hard crusher broken ships of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth (if required providing plaster with cement mortar (1:4) wherever necessary without any extra cost) including rigid smooth centering and shuttering, scafolding, watering (excluding reinforcement bars) and curing for required period including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge.(A) Labour Room |
| 17 | PH PORTION OF WORK:-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.(A) 20mm dia C - PVC pipe |
| 18 | (B) 25mm dia C - PVC pipe |
| 19 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) 15mm dia CP angle stop cock (Con - CHR - 053KN Jaquar make) |
| 20 | (ii) Elbow |
| 21 | (iii) 15mm dia CP two in one bib cock (Con - CHR - 041KN Jaquar make) |
| 22 | (iv) 15mm dia CP Bib cock(Jaquar-Medi series)FLR-CHR-5043N |
| 23 | (v) 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 24 | (vi) 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 25 | (vii) 25mm dia brass full way valve (Shakti make) |
| 26 | (viii) 15mm CP Extension piece |
| 27 | (ix) 125mm CP grating |
| 28 | (x) 15mm size C.P. flange |
| 29 | Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701 / 1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. length x 0.25 mtr width KB brick work in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60m X 1.60m and 0.10m thick, RCC beam of 0.25m x 0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering, watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing, P.H. specification and direction of Engineer-in-charge.(i) 2000 liters capacity PVC water storage tank |
| 30 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earth work in excavation in all kinds of soil and refilling of trenches, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) 110mm U-PVC SWR Pipe (Supreme / ahirvad) |
| 31 | (ii) 110mm U-PVC ‘P’ Trap (Ori Plast / Finolex / Supreme Make) |
| 32 | (iii) 110mm U-PVC door bend (Ori Plast / Finolex / Supreme Make) |
| 33 | (iv) 110mm U-PVC Plain bend (Ori Plast / Finolex / Supreme Make) |
| 34 | (v) 110mm U-PVC offset without ear (Ori Plast / Finolex / Supreme Make) |
| 35 | (vi) 110mm U-PVC Cowl (Ori Plast / Finolex / Supreme Make) |
| 36 | (vii) 110mm U-PVC Socket (Ori Plast / Finolex / Supreme Make) |
| 37 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI P or S trap (with / without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) 580mm size Orissa pan (Hindware / Parryware / Neycer make) |
| 38 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) with integral P or S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) European water closet with P trap plain(Hindware / Parryware / Neycer make) |
| 39 | Supplying all materials, labour, T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend (Slimline - white - Parryware make) |
| 40 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.(i) 550mm x 400mm W.H.basin (Hindware / Parryware / Neycer make) with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 41 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.(i) 25mm x 600mm long CP towel rail |
| 42 | (ii) Towel ring |
| 43 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.(i) 600mm x 125mm plate glass shelf with CP/NP guard rails. |
| 44 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.(i) 600mm x 450mm size B.E mirror (swivelled type) |
| 45 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.(i) CP soap holder |
| 46 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24 inch x 18 inch x 10 inch sink |
| 47 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No.1855 Including all Cost of Labour. T&P, hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 48 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC (1:3) inside and outside inside fill with dry brick khoa size 38mm, CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mm thick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 49 | Supplying all materials, labour, T&P and constructing Inspection Chamber of inside size 760mm x 760mm x 460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed, KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing, P.H specification and direction of Engineer-in-charge.(i) Inside size 76cm x 76cm x 46cm with 18” dia RCC MH cover |
| 50 | EI PORTION OF WORK:Supply, Installation. Testing & Commissioning of 25 KVA 3 phase Silent Type DG set (Make Kirloskar/Jakson/ any equivalent ) with liquid cooled engine with AMF control panel, Turbo charged engine, Acostic Enclousere & Base frame (IP +A) as per CPCB IV+ norms.( Direct Injection fuel system) completed including all required accessories to complete installation process as per standard specification with IS guidelines as per direction of engineer in charge.(The Manufacturing of DG set shall not in any case be more than six months old from the date of award of work) |
| 51 | FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure . *It also includes 4 nos copper plate earthing for neutral, , civil foundation work. |
| 52 | Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge. (i) 3.5 core x35 sq mm |
| 53 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 54 | Supplying and making end termination with double brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. (i) 3.5 core x35 sq mm Please Enable Macros to View BoQ information |
