|
| 1 | Earthwork in excavation by manual means in trenches for foundation,drains, pipes,cables etc(Not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like Not exceeding 10Sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils . |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm Nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm Nominal size) crushed |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers Not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 6 | Brick work with common burnt clay F.P.S (Non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means) |
| 7 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 8 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and laying in position cement concrete of specofied grade of reinforced cement concrete, excluding the cost of centering and shuttering, M-20(1:1.5:3) grade, with 20mm Nominal size of crushed stone aggregates. |
| 10 | Reinforcement of R.C.C work in slab, beams, lintel band, sunshades including cutting, bending,placing in position and binding and complete. |
| 11 | Centring and Shuttering including strutting, propping etc and removal of foRmt work for :- |
| 12 | Foundation , footings , basis of columns etc. for mass concrete. |
| 13 | Suspended floors, roofs , landings , balconies and access platfoRmt. |
| 14 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 15 | Columns, pillars, piers, abutments, posts and struts. |
| 16 | Edges of Slabs and Break in floors and walls under 20 cm wide |
| 17 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb |
| 18 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 19 | 6mm thick plaster in 1:3, Mix. Ceiling |
| 20 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) |
| 21 | 15mm thick Cement plaster in 1:6 (1 cement : 6 fine sand), . |
| 22 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm) |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confoRmting to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm ) |
| 24 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second kail wood |
| 25 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood |
| 27 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood |
| 28 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm |
| 29 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : tower bolts 150x10mm |
| 30 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm |
| 31 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 32 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm |
| 33 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper |
| 34 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 35 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 36 | Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. New Work |
| 37 | Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 Kg/10Sqm |
| 38 | Making plinth protection 50mm thick with cement conc. (1:3:6), 20mm Nominal size of stone aggregates over 75mm bed of dry brick ballast, 40mm Nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth andcuring complete. |
| 39 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confoRmting to IS : 13592 Type A including jointing with seal ring confoRmting to IS : 5382 leaving 10 mm gap for theRmtal expansion 110mm dia |
| 40 | Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings Size 600x450x200 mm. |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing |
| 42 | 15mm nominal outer dia pipes. |
| 43 | 25mm nominal outer dia pipes. |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 45 | Providing and laying 75mm thick compacted bed of dry brick aggregate 40mm thick nominal size including spreading, well rammed, consolidated and grouted with fine sand including finishing smooth etc. complete as per direction of Engineer-in-charge |
| 46 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 47 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore |
| 48 | Providing and Fixing Waster Pipe for Sink 32 mm dia. |
| 49 | Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25mm waste hole |
| 50 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend |
| 51 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. |
| 52 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thic |
| 53 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia |
| 54 | Providing and Fixing Electric Points Complete in all respect as per necessary as site. |
| 55 | Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete |
| 56 | Providing and Laying in Position PVC drainage pipe 4\\" dia including all fittings, complete job (LMR) |
| 57 | Enagement of Painter for writing name of school and making logo etc. |
| 58 | Providing and Fixing Ceilin Fans of approved Brand like Crompton, Usha, Havells & Bajaj all complete job. (LMR). |
| 59 | Carriage of materials by mechanical transport inculding loading / unloading and stacking complete. |
| 60 | Sand lead up to 10.00 Kms. |
| 61 | Stone aggregate below 40 mm lead up to 10 Kms. |
| 62 | Bricks lead up to 30.00 Kms Please Enable Macros to View BoQ information |
