|
| 1 | EW-AS-NC-IR) Earth work excavation for foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting (including refilling)EW-AS-NC-IR-2ma) 0 to 2 mt. |
| 2 | EW-AS-OC-ER) Earth work excavation for Open Foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting (Excluding Refilling).EW-AS-OC-ER-2ma) 0 to 2 mt. |
| 3 | ST-FB&S-PC-AT) Providing pre-constructional Antitermite treatment |
| 4 | FL-FB-SCS) Supplying and filling in foundation and basement with filling crushed stone sand |
| 5 | FL-FB-EA) Filling in foundation and basement and other similar works with Excavated earth |
| 6 | FL-FB-GR) Supplying and filling in foundation and basement with gravel (including Tax collected by Govt. per Cum) |
| 7 | FL-FB-SD) Supplying and filling in foundation and basement with Stone dust |
| 8 | RW-PB-F-HBSJ) Supplying of 3 to 10mm size HBSJ including conveyance and cost of materials |
| 9 | RW-PB-D-RMH) Supplying and fixing of Rubber Moulded Hydraulic Pressed Paver BlockRW-PB-D-RMH - 83 a) 83mm thick |
| 10 | CN-FB-PCC-1:5:10) Plain cement concrete 1:5:10 including Mortar Plasticizer (Liquid) at 200ml per bag for foundation and basement using 40 mm gauge hard broken stone jelly |
| 11 | CN-FB-PCC-1:8:16) Plain cement concrete 1:8:16 including Mortar Plasticizer (Liquid) at 200ml per bag for foundation and other similar works using 20mm gauge broken Brick Jelly |
| 12 | CN-F&S-PCS-M30-20) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M30 for the following FloorsCN-SS-PCS-M30-20) I. 20mm thickCN-SS-PCS-M30-20-(GF) a) In Ground Floor |
| 13 | CN-SS-PCS-M30-20-(1F)b) In First Floor |
| 14 | CN-SS-PCS-M30-20-(2F)c) In Second Floor |
| 15 | CN-SS-PCS-M30-20-(3F)d) In Third Floor |
| 16 | CN-SS-PCS-M30-20-(4F)e) In Fourth Floor |
| 17 | CN-SS-PCS-M30-20-(5F)f) In Fifth Floor |
| 18 | CN-SS-PCS-M30-20-(6F)g) In Sixth Floor |
| 19 | CN-SS-PCS-M30-20-(7F)h) In Seventh Floor |
| 20 | CN-F&S-PCS-M30-40) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M30 for the following thicknessCN-F&S-PCS-M30-40) II. 40mm thickCN-FB-PCS-M30-40a) In Foundation and basement |
| 21 | CN-F&S-RCC-M30) Providing and laying in position, Standardised Concrete Mix M-30 GradeCN-FB-RCC-M30a) In Foundation and basement |
| 22 | CN-SS-RCC-M30-(GF)b) In Ground Floor |
| 23 | CN-SS-RCC-M30-(1F)c) In First Floor |
| 24 | CN-SS-RCC-M30-(2F)d) In Second Floor |
| 25 | CN-SS-RCC-M30-(3F)e) In Third Floor |
| 26 | CN-SS-RCC-M30-(4F)f) In Fourth Floor |
| 27 | CN-SS-RCC-M30-(5F)g) In Fifth Floor |
| 28 | CN-SS-RCC-M30-(6F)h) In Sixth Floor |
| 29 | CN-SS-RCC-M30-(7F)i) In Seventh Floor |
| 30 | CN-SS-RCC-M30-(8F)j) In Eighth Floor |
| 31 | CN-RWH-P/AG-M30) Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depthCN-RWH-P-M30a) Providing pit |
| 32 | CN-RWH-AG-M30b) Augering 30cm dia |
| 33 | CN-FPS-1:3:6-50mm) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement, three of crushed stone sand and six of 20mm HBSJ including Mortar Plasticizer (Liquid) at 200ml per bag) |
| 34 | BW-FB-FLB-CM 1:5) Brick work in cement mortar 1:5 (one of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement including dewatering wherever necessary proper setting, curing etc., |
| 35 | BW-MW-FLB-CM 1:6) Brick work in Cement Mortar 1:6 (one of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floorsBW-SS-FLB-CM 1:6-(GF)b) In Ground Floor |
| 36 | BW-SS-FLB-CM 1:6-(1F)c) In First Floor |
| 37 | BW-SS-FLB-CM 1:6-(2F)d) In Second Floor |
| 38 | BW-SS-FLB-CM 1:6-(3F)e) In Third Floor |
| 39 | BW-SS-FLB-CM 1:6-(4F)f) In Fourth Floor |
| 40 | BW-SS-FLB-CM 1:6-(5F)g) In Fifth Floor |
| 41 | BW-SS-FLB-CM 1:6-(6F)h) In Sixth Floor |
| 42 | BW-SS-FLB-CM 1:6-(7F)i) In Seventh Floor |
| 43 | BW-SS-FLB-CM 1:6-(8F)j) In Eighth Floor |
| 44 | BW-PW 110mm-FLB-CM 1:4) Brick partition wall in Cement Mortar 1:4 (one of sand and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM²BW-PW 110mm FB-FLB-CM 1:4a) In Foundation and basement |
| 45 | BW-PW 110mm SS-FLB-CM 1:4-(GF)b) In Ground Floor |
| 46 | BW-PW 110mm SS-FLB-CM 1:4-(1F)c) In First Floor |
| 47 | BW-PW 110mm SS-FLB-CM 1:4-(2F)d) In Second Floor |
| 48 | BW-PW 110mm SS-FLB-CM 1:4-(3F)e) In Third Floor |
| 49 | BW-PW 110mm SS-FLB-CM 1:4-(4F)f) In Fourth Floor |
| 50 | BW-PW 110mm SS-FLB-CM 1:4-(5F)g) In Fifth Floor |
| 51 | BW-PW 110mm SS-FLB-CM 1:4-(6F)h) In Sixth Floor |
| 52 | BW-PW 110mm SS-FLB-CM 1:4-(7F)i) In Seventh Floor |
| 53 | BW-PW 70mm-FLB-CM 1:4) Brick partition wall in Cement Mortar 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floorsBW-PW 70mm SS-FLB-CM 1:4-(GF)b) In Ground Floor |
| 54 | BW-PW 70mm SS-FLB-CM 1:4-(1F)c) In First Floor |
| 55 | BW-PW 70mm SS-FLB-CM 1:4-(2F)d) In Second Floor |
| 56 | BW-PW 70mm SS-FLB-CM 1:4-(3F)e) In Third Floor |
| 57 | BW-PW 70mm SS-FLB-CM 1:4-(4F)f) In Fourth Floor |
| 58 | BW-PW 70mm SS-FLB-CM 1:4-(5F)g) In Fifth Floor |
| 59 | BW-PW 70mm SS-FLB-CM 1:4-(6F)h) In Sixth Floor |
| 60 | BW-PW 70mm SS-FLB-CM 1:4-(7F)i) In Seventh Floor |
| 61 | PL-FL-CM 1:4-20mm) Plastering the top of flooring in CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including surface rendered smooth including providing proper slopes, thread lining, curing and 150mm wide skirting alround with the same cement mortar etc. complete in all respects |
| 62 | CN-Ellis-CM 1:3-BGC) Finishing the top of flooring with cement concrete 1:3 (one of cement and three of blue granite chips of size 10mm and below) 20mm thick Ellispattern Flooring (No Sand) and surface rendered smooth including 150mm wide skirting, providing proper slopes, thread lining, curing etc.. complete in all floors |
| 63 | CN-TEC-WC-NS) Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) over RCC Roof Slab with proportion of brick jelly to lime (fat lime) being 32:12½ by volume well beaten with wooden beaters for giving the required slope and thickness |
| 64 | TL-RO-PT-CM 1:3) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (one of cement and three of crushed stone stone sand including mortar plasticizer (liquid) at 200ml per bag) 12mm thick mixed with water proof compound 2% by weight of cement |
| 65 | TL-WL-GZT-CM 1:2) Supplying and fixing of Colour glazed tiles over cement plastering in CM 1:2 (one of cement and two of crushed stone sand) including Mortar Plasticizer (Liquid) at 200ml per bag 10mm thick fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), including curing, finishing etc., |
| 66 | TL-FL-CT-CM 1:3) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works over cement mortor 1:3 (one of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), curing, finishing etc., |
| 67 | TL-FL-NVT-CM 1:3) Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring and other similar works in cement mortar 1:3 (one of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary pointing the joints with grout (Tile joint filler), curing, finishing etc., |
| 68 | TL-FL-CDT-CM 1:3) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (one of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick, including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with White/colour cement, finishing, curing etc |
| 69 | TL-WL-PVC-TRIM) Supplying and fixing of PVC Trims (Beedings) including charges for fixing in position without damaging the existing structure etc., |
| 70 | FW-FW-WOS-RCC) Providing Form work and centering for reinforced cement concrete worksFW-FB-WOS-FBa) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc., |
| 71 | FW-SS-WS-PSb) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works |
| 72 | FW-SS-WS-COc) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxing, fin projection and other similar works. |
| 73 | FW-SS-WS-VW) For vertical walls |
| 74 | PL-OU-CM 1:5-12mm) Plastering with CM 1:5 (one of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement, including providing band cornice, ceiling cornice, curing, scaffolding, etc., |
| 75 | PL-IN-CM 1:4-12mm) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement including providing band cornice, ceiling cornice, curing, scaffolding etc., |
| 76 | PL-CL-CM 1:3-10mm thick) Special ceiling plastering in cement mortar 1:3 (one of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick for bottom of roof, stair, waist, landing and sunshades in all floors finished with neat cement including hacking the areas, providing band cornice, scaffolding, curing etc., |
| 77 | PL-WPC-CM 1:3-12mm) Plastering in CM 1:3 (one of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2% by weight of cement for sump including scaffolding curing, finishing etc., |
| 78 | PL-OU-CM 1:5-Bor) Plastering in CM 1:5 including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors for elevation purposes, scaffolding, curing, finishing etc.,PL-OU-CM 1:5-150mma) 150mm wide border |
| 79 | PL-OU-CM 1:5-75mmb) 75mm wide border |
| 80 | PL-OU-CM 1:5-50mmc) 50mm wide border |
| 81 | PA-CE-WW-SL 3C) White washing three coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc. |
| 82 | PA-IN-WP-2C BPC) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of primer of approved quality and shade |
| 83 | PA-Ex-IW-2C EP) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand over the thorough scrapped surface including scrapping the existing surface |
| 84 | PA-IN-WP-2CP BWP) Supplying and applying of Full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls including cost of putty, brushes, watering, curing, labour charges for applying putty, blade etc., |
| 85 | PA-IN-PEP-2C BPC) Painting the false ceilling / New walls with two coats of 1st class ready mixed Plastic Emulsion Paint of best approved quality colour and shade including a priming coat over cement plastered surface including clean removal of dirt and dust etc. |
| 86 | PA-Ex-EEP-2C BPC) Painting the new walls with two coats of approved best Exterior Emulsion paint of best approved quality color and shade in addition to one coat of approved primer paint over cement plastered wall surfaces including cost of Exterior Emulsion paint, putty, brushes, etc., |
| 87 | PA-IN-MP) Providing wooden (Melamen Door) Polish for new wood by removing by blade scrapping the exisiting dirt from the wooden surface sand paper etc., all complete including cost of all materials and labour |
| 88 | JN-WR-TWF-WRF) Supplying and fixing of Teak Wood wrought and put up for frames of doors, windows, ventilators, cupboard and any other similar joinery works with necessary plugs, rebates for shutters, plaster grooves on all faces etc.,JN-WR-TWF-A 2m F a) Teak wood over 2.00 metre and below 3.00 metre length |
| 89 | JN-WR-TWF-B 2m Fb) Teak wood below 2.00 metre length |
| 90 | JN-D-DC-M) Supply and fixing of best approved superior variety magnetic door catches suitable for doors including cost of door catches, Aluminium/ Stainless steel screws fixing in position, etc., |
| 91 | JN-GP-PHG-Tk) Supplying and fixing of following thick pin headed Glass panels with aluminium anodised ‘U’ shape beeding of size 12x12mm with 107 gram in average weight for 1m length with aluminium bolts and nuts for the shutters of the steel windows already supplied to suit all the sizeJN-GP-PHG-4mmb) 4mm thick |
| 92 | JN-D-MS-HF) Supplying of mild steel hold fasts horizontally twisted of size 230x40x4mm with pair of suitable iron screws |
| 93 | JN-WPC D-SL-D) Supply & Fixing of WPC Decora Door set where the Door shall be extruded as a single core door with Lead-Free compound and the surface shall have Decora Design i.e, Non-porous Smooth Routing and 3D embossed wooden bark grains on one side |
| 94 | JN-V-UPVC-LV) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators |
| 95 | JN-UPVC W-UPVC-OP W) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) |
| 96 | JN-TWPD-DL-ORNAM-BF) Supplying and fixing of best Indian Teak wood Double leaf Panelled Door shutters with Brass fittingsJN-TWPD-DL-ORNAM-BF-2.1x2.1a) 2100 mm x 2100 mm |
| 97 | JN-SC D-SL-FLS-2.1H) Supplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR)JN-SC D-SL-FLS-0.9 x 2.1b) 900mm x 2100mm |
| 98 | JN-SC D-SL-FLS-1 x 2.1c) 1000mm x 2100mm |
| 99 | MW-MS-GR) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate including one coat of primer and labour for fixing in position etc. |
| 100 | MW-HR-SS-SH) Manufacturing, supplying and fixing of stainless steel hand rails for staircase using 304 L grade stainless steel pipe |
| 101 | RE-RTS-Fe-NC) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) |
| 102 | IN-CBD-TW-OSLB) Providing T.W.double leaf shutters for cupboard/ward robes with prelaminated particle board or prelaminated cement bonded particle board for shutters |
| 103 | RW-KS-CC 1:3:6-PC) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (one of cement, three of crushed stone sand and six of HBSJ) using 20mm size HBSJ including Cost of Mortar Plasticizer (Liquid) at 200ml per bag, the cost of Kerb stone moulding, laying, curing, transporting, pointing |
| 104 | WS-EX-RWD-PVC) Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipeWS-EX-RWD-110b) 110mm dia PVC SWR pipe |
| 105 | WS-IN-S-CI) Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each) including cost of material labour charges for fixing etc., |
| 106 | WS-IN-HCP-LBT) Supplying and fixing of 15mm dia half turn C.P Tap (Long body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, |
| 107 | WS-IN-HCP-SBT) Supplying and fixing of 15mm dia half turn C.P Tap (Short body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, |
| 108 | SA-Ex-SFRC-S) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty with 10 Ton capacity including of all cost etc.,SA-Ex-SFRC-600 x 600b) 600mm x 600 mm |
| 109 | WS-EX-ASTM-PVC) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 WS-EX-ASTM-32 PVCa) 32mm dia |
| 110 | WS-EX-ASTM-25 PVCb) 25mm dia |
| 111 | WS-IN-HW-20 FC) Supplying, laying and fixing of the following Pipe of best approved quality for Hot water line fully concealed in walls including cost of pipes and specials, labour charges for laying, jointing, testing and redoing the dismantled portions with neat finish etc.,WS-IN-HW-20 GIa) 20mm dia G.I. pipe |
| 112 | WS-IN-ASTM- PVC) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D - 1785 Fully concealed in wallsWS-IN-ASTM-20 PVCc) 20mm dia |
| 113 | SA-IN-PVC EC-32) Supplying and fixing of 32mm dia PVC Tee with end cap |
| 114 | WS-IN/EX-Spl PVC/UPVC/CPVC/ GI/ CI/ GM/MS/SS-Dia) Supplying and fixing of the following dia of the GI, GM & UPVC specialsWS-IN/EX-GM NRV-50f) 50mm dia GM Non Return valve |
| 115 | WS-IN/EX-GI Un-50f) 50mm dia GI Union |
| 116 | WS-IN/EX-UPVC Un-50f) 50mm dia UPVC Union |
| 117 | WS-IN/EX-UPVC TEE-50f) 50mm dia UPVC Tee |
| 118 | WS-IN/EX-UPVC EL-50f) 50mm dia UPVC Elbow |
| 119 | WS-IN/EX-UPVC HN-50f) 50mm dia UPVC Hex Nipple |
| 120 | WS-IN/EX-UPVC Cu-50f) 50mm dia UPVC Coupler |
| 121 | WS-IN/EX-GI Cu-32d) 32mm dia GI Coupler |
| 122 | WS-IN/EX-GI EL-32d) 32mm dia GI Elbow |
| 123 | WS-IN/EX-GI HN-32d) 32mm dia GI Hex Nipple |
| 124 | WS-IN/EX-GM NRV-32d) 32mm dia GM Non Return valve |
| 125 | WS-IN/EX-UPVC EL-32d) 32mm dia UPVC Elbow |
| 126 | WS-IN/EX-UPVC Un-32d) 32mm dia UPVC Union |
| 127 | WS-IN/EX-UPVC Cu-32d) 32mm dia UPVC Coupler |
| 128 | WS-IN/EX-UPVC MTA-32d) 32mm dia UPVC MTA |
| 129 | WS-IN/EX-UPVC FTA-32d) 32mm dia UPVC FTA |
| 130 | WS-IN/EX-UPVC MTA-50f) 50mm dia UPVC MTA |
| 131 | WS-IN/EX-UPVC FTA-50f) 50mm dia UPVC FTA |
| 132 | WS-IN/EX-UPVC RED TE-50X32s) 50 x 32mm dia UPVC Reducer Tee |
| 133 | WS-IN/EX-GM GV-32d) 32mm dia GM Gate valve |
| 134 | SA-IN-WB-P) Supplying and fixing of following porcelin wash hand basin , superior variety of size 550x400mm with all accessoriesSA-IN-WB-WWOPb) White without pedastal wash hand basin |
| 135 | SA-IN-GT-KB) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete |
| 136 | SA-IN-NT-PVC) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) |
| 137 | SA-IN-IWC-GF) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (In Ground floor) |
| 138 | SA-IN-IWC-OGF) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (Other than ground floor) |
| 139 | SA-IN-EWC-W) Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap |
| 140 | SA-Ex-SWR P-Dia) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil lineSA-Ex-SWR P-110a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 141 | SA-Ex-SWR P-75b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 142 | SA-Ex-SWR P-50) Supplying,laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark conforming to IS 13952:1992- type `B` for waste water line with relevant specials |
| 143 | SA-Ex-SN8-Dia) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003SA-Ex-SN8-110) a) 110 mm UPVC Non Pressure pipe |
| 144 | SA-Ex-SN8-160b) 160 mm UPVC Non Pressure pipe |
| 145 | SA-IN-Spl.-Fit) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings SA-IN-CP-2WBCa) CP Two Way Bib Cock with Health Faucet |
| 146 | IN-FT-RR-M) Supplying and fixing of following rooms fittings including cost of materials with screws, TW plugs and labour charges for fixing in position etc. IN-FT-TR-M II.Towel Rail/RackIN-FT-Alu TR-75cma) 75cm long Aluminium Towel Rail |
| 147 | IN-FT-RR-M) Supplying and fixing of following rooms fittings including cost of materials with screws, TW plugs and labour charges for fixing in position etc. IN-FT-CS-M III.Coat standIN-FT-Alu CS-5Pa) Aluminium plate with five pins for coat stand |
| 148 | IN-FT-RR-M) Supplying and fixing of following rooms fittings including cost of materials with screws, TW plugs and labour charges for fixing in position etc. IN-FT-PH-M IV.Picture HooksIN-FT-IC PH-8 Ga) Iron chromium plated 8 gauge Picture hooks |
| 149 | IN-FT-BM-PVC) Supplying and fixing of Beveled Edge Mirror of approved quality and brandIN-FT-BM-500x400a) 500x400x5.5mm shelf type mounted |
| 150 | LW-TP-TP-T) Supply and planting of avenue trees |
| 151 | LW-TP-TG-Tri S) Supplying and fixing of triangular shape chicken mesh tree guard |
| 152 | EL-IN-EP-LP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earthEL-IN-EP-WCRa) Light point with ceiling rose |
| 153 | EL-IN-EP-WOCRb) Light point with bakelite pattern type holder |
| 154 | EL-IN-EP-CBc) Point wiring for calling bell/ buzzor with push type switch |
| 155 | EL-IN-EP-FP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth for Fan Point |
| 156 | EL-IN-EP-SLP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth for Stair case light point |
| 157 | EL-IN-EP-SBI) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth for Switch Board Itself |
| 158 | EL-IN-EP-CP) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 K.v. grade with continuous earth cable for convenient places |
| 159 | EL-IN-EP-PS) Supplying and fixing 15amps 3 pin plug type socket on a suitable MS box 16g thick concealed and covered with 3 mm thick laminated hylem sheet |
| 160 | EL-IN-EF-ES) Providing Earthing Station using Pipe electrode as per IS 3043 using 2.1 m of 38 mm dia and 0.15 m of 19 mm dia B Class. GI pipe including cost of all materials and labour |
| 161 | EL-IN-EF-FH) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook |
| 162 | EL-IN-EF-AC) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (excluding cost of Fan) |
| 163 | EL-IN-EF-F) Supply and delivery of following Electric Ceiling fan with ISI markEL-IN-EF-48'Fa) 48' Electric fan 1200mm sweep |
| 164 | EL-IN-EF-EF) Supplying and fixing of following dia sweep AC exhaust fan of approved ISI QualityEL-IN-EF-EF225a) 225 mm dia sweep AC exhaust fan |
| 165 | EL-IN-EF-EF450c) 450 mm dia sweep AC exhaust fan |
| 166 | EL-IN-LED.F-LB) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder EL-IN-EF-9Wa) 9 watts LED bulb |
| 167 | EL-IN-EF-12Wb) 12 watts LED bulb |
| 168 | EL-IN-LED.F-TL) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark |
| 169 | EL-IN-LED-ROU-18W) Supply and fixing of 18W LED Round type Recessed fitting with LED (Lower end) |
| 170 | EL-IN-EF-BH) Supplying and fixing of Bulk Head fitting suitable for LED with Guardb) 12 watts LED bulb |
| 171 | EL-EX-EF-SL) Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LEDEL-EX-EF-SL-25W) 25W LED Street Light Fitting with LED |
| 172 | EL-IN-EF-TPN-100A) Supplying and fixing of 100 Amps triple pole main switch |
| 173 | EL-IN-EF-ELCB-TP) Supplying and fixing of Three Phase ELCB |
| 174 | EL-IN-WR-2x2.5m2) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable |
| 175 | EL-IN-WR-2x4m2) Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable |
| 176 | EL-IN-WR-4x6m2) Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable |
| 177 | EL-IN-EF-DP-AC/20A) Supply and fixing of 20A Double pole plug and sockets in sheet steel enclosure with 32 amps DP MCB in flush with wall, with earth connection (for AC Plug) |
| 178 | EL-IN-EF-MCB) Supply, fixing, Testing and Commisioning of MCB sheet steel enclosure with earth connection on surface / recess including interconnetion, painting etc.,EL-IN-EF-SPMCBSingle pole 10 Amps, 10 KA MCB |
| 179 | EL-IN-EF-8 SWG) Supplying and laying of 8SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc. |
| 180 | EL-IN-EF-FU) Supplying and fixing following porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps including cost of all materials etc.,EL-IN-EF-3-100aFUc) 3 nos of 100 amps 500 volts grade porcelain fuse unit |
| 181 | EL-IN-EF-4P-63 COS) Supply and fixing of 63A Three phase 500V 4 Pole change over switch |
| 182 | EL-IN-TEL-TV-S) Supplying, fixing and concealing T.W box of size 8\\"x6\\"x4\\" covered with 3mm thick hylem sheet including Cost of TV line socket / Telephone line Socket etc. |
| 183 | EL-IN-TEL-TV-P20) Supplying, laying and concealing of PVC pipe of 20mm dia with necessary specials and other materials including Run off 1No. Fish wire (G.I.22g) for drawing cable for T.V./Telephone etc., |
| 184 | MW-SNB-MS-N&LO B) Supplying, fabrication and erection in position of M.S. scheme name and layout board |
| 185 | PL-EL-APP-MEM) Supply and fixing of APP Membrane basic cleaning of the surface |
| 186 | EL-IN-EF-FL) Supply and fixing of the following Flood light / Focus light with Fitting and with necessary back lamp with bolts & nutsEL-IN-EF-FL-80Wc. 80 Watts |
| 187 | WS-Ex-DBW-HR) Drilling of (150mm) vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting the casing pipe after inserting the casing pipe in the drilling hole etc.,WS-Ex-DBHR-150a) Upto 150m depth ending below Ground level |
| 188 | WS-Ex-DBHR-180b) From 151m upto 180m depth ending below Ground level |
| 189 | WS-Ex-DBHR-210c) From 181m upto 210m depth ending from Ground level |
| 190 | WS-Ex-DBHR-240d) From 211m upto 240m depth ending from Ground level |
| 191 | WS-Ex-DBHR-270e) From 241m upto 270m depth ending from Ground level |
| 192 | WS-Ex-DBHR-300 f) From 271 m upto 300 m depth ending from Ground level |
| 193 | WS-Ex-DBHR-330g) From 301 m upto 330 m depth ending from Ground level |
| 194 | WS-Ex-PVC EC-160) Supplying and fixing of 160mm dia PVC end cap for borewell casing pipe of approved brand etc. |
| 195 | WS-Ex-CM-Dia) Supply and delivery of following dia PVC casing pipies without excise duty as per IS 12818/2010 of approved quality for bore wellsWS-Ex-CS-150150mm dia Casing Shallow depth |
| 196 | WS-Ex-BWSM-TP) Supply and delivery of 5 HP clear water vertical wet type Three Phase submersible pumpset suitable for 150mm dia borewell WS-Ex-BWSM-75 x 150Duty - 75 lpm x 150m |
| 197 | WS-Ex-OWSM-TP) Supply and delivery of 3 HP Open well Submersible pump set without panel boardWS-Ex-OWSM-100 x 50Duty - 100 lpm x 50 m |
| 198 | WS-Ex-LC-S BW/OW) Labour charges for the erection of submersible pumpset in borewell/openwell upto 5 HP |
| 199 | WS-IN/EX-UPVC-BGL Supplying, delivery laying and testing of following dia (PVC Pipes (WITH ISI MONOGRAM)/(6 kg. per cm2)/(10 kg. per cm2) /UPVC Pipe (Un-Plasticized Polyvinyl Chloride) (Schedule-40 / Schedule-80)/ CPVC Pipe (Chlorinated Poly Vinyl Chloride) of approved ISI quality Below Ground Level50mm dia UPVC Pipes |
| 200 | 32mm dia UPVC Pipes |
| 201 | WS-Ex-Ny R-BW) Supply and delivery of required dia nylon rope of superior quality for submersible pumpset in borewell |
| 202 | WS-Ex-FCC-3c) Supply and laying of PVC insulated and sheathed following core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor etc.,WS-Ex-FCC-3x4 c) 3 core 4 sq.mm flat type copper cable |
| 203 | WS-Ex-DOL-TPPB-3 HP) Three Phase Panel Board - DOL with Two level Guard and Auto start Supply and delivery of 3 HP direct online starter confirming to IS13947, IEC60947-1 |
| 204 | WS-Ex-DOL-TPPB-5 HP) Three Phase Panel Board - DOL with Two level Guard and Auto start Supply and delivery of 5 HP direct online starter confirming to IS13947, IEC60947-2 |
| 205 | WS-IN/EX/GI/BGL) Supplying, delivery laying and testing of following dia GI Pipes of approved ISI quality Below Ground Level20mm dia GI Pipes |
| 206 | WS-Ex-UPVC CP-CP) Supplying of following dia UPVC column pipe for borewell including cost of all materials WS-Ex-UPVC CP-32b) 32mm Column Pipe Please Enable Macros to View BoQ information |
