Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 2 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) |
| 3 | Providing preconstructional antitermite treatment as per I.S. 6313 (PartII) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. ( AS per Item no. 22.43 of schedule of rates of NBO ) |
| 4 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to20 cm including watering and compactionetc. complete. |
| 5 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 11 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 12 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 13 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 14 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 15 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 16 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 17 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete |
| 18 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 19 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 20 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. |
| 21 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 22 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 23 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. |
| 24 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 25 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complet |
| 26 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. |
| 27 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18x 1.25 mm at weight o.417 |
| 28 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc.complete. |
| 29 | Solid Core Flush door Double leafProviding and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter |
| 30 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved waterproofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper ofRs. 500/- including ponding test etc. complete. |
| 31 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 32 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 33 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 34 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) |
| 35 | Providing preconstructional antitermite treatment as per I.S. 6313 (PartII) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. ( AS per Item no. 22.43 of schedule of rates of NBO ) |
| 36 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to20 cm including watering and compactionetc. complete. |
| 37 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 38 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 39 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 40 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 41 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 42 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 43 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 44 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 45 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 46 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 47 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 48 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 49 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete |
| 50 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 51 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 52 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. |
| 53 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 54 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 55 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. |
| 56 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 57 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complet |
| 58 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. |
| 59 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18x 1.25 mm at weight o.417 |
| 60 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc.complete. |
| 61 | Solid Core Flush door Double leafProviding and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter |
| 62 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved waterproofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper ofRs. 500/- including ponding test etc. complete. |
| 63 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 64 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 65 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 66 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 67 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 68 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 69 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 70 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 71 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 72 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 73 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 74 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) |
| 75 | Providing preconstructional antitermite treatment as per I.S. 6313 (PartII) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. ( AS per Item no. 22.43 of schedule of rates of NBO ) |
| 76 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to20 cm including watering and compactionetc. complete. |
| 77 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 78 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 79 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 80 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 81 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 82 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 83 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 84 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 85 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 86 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 87 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 88 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 89 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete |
| 90 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 91 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 92 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. |
| 93 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 94 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 95 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. |
| 96 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 97 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complet |
| 98 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. |
| 99 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18x 1.25 mm at weight o.417 |
| 100 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc.complete. |
| 101 | Solid Core Flush door Double leafProviding and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter |
| 102 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved waterproofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper ofRs. 500/- including ponding test etc. complete. |
| 103 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 104 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 105 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 106 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) |
| 107 | Providing preconstructional antitermite treatment as per I.S. 6313 (PartII) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. ( AS per Item no. 22.43 of schedule of rates of NBO ) |
| 108 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to20 cm including watering and compactionetc. complete. |
| 109 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 110 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 111 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 112 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 113 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 114 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 115 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 116 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 117 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 118 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 119 | Providing and laying cast-in-situ / Ready Mix Cement Concrete of grade M-20 using trap / granite / quartzite / gneiss metal for R.C.C. columns, as per detailed designs and drawings or as directed, including steel centering and shuttering, providing and fixing cover blocks, laying or pumping of concrete, mechanical compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to obtain a smooth and even surface or roughening of the surface wherever special finish is to be provided, and curing, complete.Excluding the cost of reinforcement and structural steel.Concrete shall be mixed using a fully automatic microprocessor-based PLC with SCADA-enabled reversible drum type mixer / concrete batching plant (pan mixer), including all materials, labour, machinery, and incidental charges, complete.With fine aggregate: Crushed sand (VSI grade).. |
| 120 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 121 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete |
| 122 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 123 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 124 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. |
| 125 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 126 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 127 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. |
| 128 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 129 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complet |
| 130 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. |
| 131 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18x 1.25 mm at weight o.417 |
| 132 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc.complete. |
| 133 | Solid Core Flush door Double leafProviding and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter |
| 134 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved waterproofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper ofRs. 500/- including ponding test etc. complete. |
| 135 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 136 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 137 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 138 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 139 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 140 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 141 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 142 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 143 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 144 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles, including fastening with galvanised iron screws and bolts, lead and bitumen washers, as per drawing etc. complete. (Weight of 5.5 Kilogram/sq.m.). |
| 145 | 18% GSt |
| 146 | 1% SQM |
| 147 | Electricfication |
| 148 | Plumbing |
| 149 | Labour Cess Please Enable Macros to View BoQ information |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail