|
| 1 | Providing and fixing 19 mm thick commercial board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc. complete. |
| 2 | Providing and fixing 19 mm thick water proof commercial board in shutter/ box for cup board with butt joints & fixing with nickel plated piango hinges with etc complete. |
| 3 | Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall lining i/c metering at junction butt jointing and nails complete (frame work for base to be measured & paid for separately) a) 12 mm thick |
| 4 | Providing 50X50X50mm wooden plugs including cutting bricks/stone work and fixing in cement mortar 1:3(1 Cement:3 sand (1 cement:3 sand) and making good the walls etc. |
| 5 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, includingpriming coat on unexposed surface with :a) Decorative veneer facings of approved manufacture |
| 6 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. |
| 7 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.a) Double strap ( horizontal type) |
| 8 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.a) 1.0 mm thick |
| 9 | Providing and fixing bright/ matt finished stainless steel handles of approved quality & make with necessary screws etc. all complete.a) 125mm |
| 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.a) In gratings, frames, guard bar, ladder railings, brackets, gates and similar works |
| 11 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 12 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.a) Two Coats |
| 13 | French spirit polishing :a) Two or more coats on new works including a coat of wood filler. |
| 14 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) contenta) With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Please Enable Macros to View BoQ information |
