|
| 1 | Part - A - For Erection of 1.0 KM 33 KV O/H line on ACSR Dog Conductor of 33 KV S/S Ambika from 132 KV GSS Ambika |
| 2 | Conducting route survey as per approved Route map and pegging of route with tee off point section point & double pole locations. |
| 3 | Trimming of tree branches/plants and preparing route approchases for proposed line. |
| 4 | Excavation of pit in ordinary rock which does not require blasting/murrad (in Jodhpur discom) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 5 | (A) Height of poles/R.S.Joist/M.S Rail Size of pit |
| 6 | 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 7 | (B) Lattice Tower /Size of pit |
| 8 | 11.4/10.8 Mtr/ 1.5mx1.5m x1.80 m deep |
| 9 | (C)Stay set/Depth of pit |
| 10 | 8'x 3/4\\" -0.75x0.5x1.6 m |
| 11 | Safe carriage of PCC poles including loading / un-loading |
| 12 | a) 9 Mtr. Long-400 Kg /11 Mtr. PCC pole |
| 13 | Within 10 Kms. |
| 14 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 15 | Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site |
| 16 | Within 10 Kms. |
| 17 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 18 | Safe Carriage of Insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. |
| 19 | Within 10 Kms. |
| 20 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 21 | Safe carriage of fabricated lattice towers structures and sub-station structures type AB, AB beams, isolators structures etc. including loading/unloading and stacking in the Nigam. Stores / at work site. |
| 22 | Within 10 Kms. |
| 23 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 24 | Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. The nuts & bolts are to be provided by the contractor as per Nigam's specification for which the payment will be made at the prevailing Discom store issue rates. |
| 25 | PCC Poles 9 Mtr. Long (400 Kg) |
| 26 | Erection &assembly of 2 Pole structures of steel supports or PCC poles in excavated pit in alignment after checking the same with plumb line.Including fixing of top bracing of M.S.Channels with pilot plates and clamps.The support is to be back filled with soil with proper ramming.The nuts &bolts are to be provided by the contractor as per Nigams specfication for which the payment will be made at the prevailing Discom store issue rates. |
| 27 | PCC Poles 9 Mtr. Long(400 Kg.)/11Mtr.long |
| 28 | Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire |
| 29 | 8\\"x3/4\\" with 7/8 SWG stay wire |
| 30 | Erection & fixing of steel struts in the excavated pit in position.The top end of the strut will be properly holed/welded with the main support muffed in cement concrete of ratio 1:3:6 as per item No.5.7.The nuts and bolts will be provided by the contractor as per Nigams specification for which payment will be made at the prevailing store issue rate.The cost of muffing and grouting will be paid extra. |
| 31 | Lattice Structure |
| 32 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base. |
| 33 | Fixing of all type of fabricated material on erected supports with nut & bolts as per approved design & drawing of sub-station. |
| 34 | Fixing of 11kv B&S/T&C type disc insulator for 33kv lines (each unit consiting of 3 nos .disc.& 1set of H/W) on terminal point including fixing of hardware and strips. |
| 35 | Fixing of 33kv pin insulator with pins. |
| 36 | Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging.The contractor will be provide P.G.clamps for which payment will be made as per prevailing Discom issue rate. |
| 37 | ACSR DOG |
| 38 | Fabrication of steel structures of M.S angle, M.S.channel & M.S.Flat including cutting, drilling as per design and drawing. |
| 39 | 1.8 Mtr Channel Bracket with clamp (19.271 Kg) |
| 40 | Part - B - For Erection of 1.0 KM 33 KV O/H line on ACSR Dog Conductor of 33 KV S/S Jatoli from 132 KV GSS Ambika |
| 41 | Conducting route survey as per approved Route map and pegging of route with tee off point section point & double pole locations. |
| 42 | Trimming of tree branches/plants and preparing route approchases for proposed line. |
| 43 | Excavation of pit in ordinary rock which does not require blasting/murrad (in Jodhpur discom) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 44 | (A) Height of poles/R.S.Joist/M.S Rail Size of pit |
| 45 | 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 46 | (B) Lattice Tower /Size of pit |
| 47 | 11.4/10.8 Mtr/ 1.5mx1.5m x1.80 m deep |
| 48 | (C)Stay set/Depth of pit |
| 49 | 8'x 3/4\\" -0.75x0.5x1.6 m |
| 50 | Safe carriage of PCC poles including loading / un-loading |
| 51 | a) 9 Mtr. Long-400 Kg /11 Mtr. PCC pole |
| 52 | Within 10 Kms. |
| 53 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 54 | Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site |
| 55 | Within 10 Kms. |
| 56 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 57 | Safe Carriage of Insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. |
| 58 | Within 10 Kms. |
| 59 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 60 | Safe carriage of fabricated lattice towers structures and sub-station structures type AB, AB beams, isolators structures etc. including loading/unloading and stacking in the Nigam. Stores / at work site. |
| 61 | Within 10 Kms. |
| 62 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 63 | Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. The nuts & bolts are to be provided by the contractor as per Nigam's specification for which the payment will be made at the prevailing Discom store issue rates. |
| 64 | PCC Poles 9 Mtr. Long (400 Kg) |
| 65 | Erection &assembly of 2 Pole structures of steel supports or PCC poles in excavated pit in alignment after checking the same with plumb line.Including fixing of top bracing of M.S.Channels with pilot plates and clamps.The support is to be back filled with soil with proper ramming.The nuts &bolts are to be provided by the contractor as per Nigams specfication for which the payment will be made at the prevailing Discom store issue rates. |
| 66 | PCC Poles 9 Mtr. Long(400 Kg.)/11Mtr.long |
| 67 | Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire |
| 68 | 8\\"x3/4\\" with 7/8 SWG stay wire |
| 69 | Erection & fixing of steel struts in the excavated pit in position.The top end of the strut will be properly holed/welded with the main support muffed in cement concrete of ratio 1:3:6 as per item No.5.7.The nuts and bolts will be provided by the contractor as per Nigams specification for which payment will be made at the prevailing store issue rate.The cost of muffing and grouting will be paid extra. |
| 70 | Lattice Structure |
| 71 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base. |
| 72 | Fixing of all type of fabricated material on erected supports with nut & bolts as per approved design & drawing of sub-station. |
| 73 | Fixing of 11kv B&S/T&C type disc insulator for 33kv lines (each unit consiting of 3 nos .disc.& 1set of H/W) on terminal point including fixing of hardware and strips. |
| 74 | Fixing of 33kv pin insulator with pins. |
| 75 | Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging.The contractor will be provide P.G.clamps for which payment will be made as per prevailing Discom issue rate. |
| 76 | ACSR DOG |
| 77 | Fabrication of steel structures of M.S angle, M.S.channel & M.S.Flat including cutting, drilling as per design and drawing. |
| 78 | 1.8 Mtr Channel Bracket with clamp (19.271 Kg) |
| 79 | Part - C - For Erection of 8.0 KM 33 KV O/H line on ACSR Dog Conductor of 33 KV S/S Rehsana from 132 KV GSS Ambika |
| 80 | Conducting route survey as per approved Route map and pegging of route with tee off point section point & double pole locations. |
| 81 | Trimming of tree branches/plants and preparing route approchases for proposed line. |
| 82 | Excavation of pit in ordinary rock which does not require blasting/murrad (in Jodhpur discom) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 83 | (A) Height of poles/R.S.Joist/M.S Rail Size of pit |
| 84 | 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 85 | (B) Lattice Tower /Size of pit |
| 86 | 11.4/10.8 Mtr/ 1.5mx1.5m x1.80 m deep |
| 87 | (C)Stay set/Depth of pit |
| 88 | 8'x 3/4\\" -0.75x0.5x1.6 m |
| 89 | Safe carriage of PCC poles including loading / un-loading |
| 90 | a) 9 Mtr. Long-400 Kg /11 Mtr. PCC pole |
| 91 | Within 10 Kms. |
| 92 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 93 | Safe carriage of steel( fabricated and unfabricated) I.e.M.S. Rails, R.S.Joists, M.S.Channels, M.S.Angles, M.S.Flat, G.I.Stay Sets, G.I. Stay Wire, G.I.Wire Nut & Bolts etc. and ACSR Conductor including loading and unloading and stacking in Nigam store /at work site |
| 94 | Within 10 Kms. |
| 95 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 96 | Safe Carriage of Insulator, hardware, cable etc.including loading/unloading and stacking in Nigam.stores etc. |
| 97 | Within 10 Kms. |
| 98 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 99 | Safe carriage of fabricated lattice towers structures and sub-station structures type AB, AB beams, isolators structures etc. including loading/unloading and stacking in the Nigam. Stores / at work site. |
| 100 | Within 10 Kms. |
| 101 | Above 10 Kms. & upto 30 Kms. Add for each Km.or part thereof. |
| 102 | Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. The nuts & bolts are to be provided by the contractor as per Nigam's specification for which the payment will be made at the prevailing Discom store issue rates. |
| 103 | PCC Poles 9 Mtr. Long (400 Kg) |
| 104 | Erection &assembly of 2 Pole structures of steel supports or PCC poles in excavated pit in alignment after checking the same with plumb line.Including fixing of top bracing of M.S.Channels with pilot plates and clamps.The support is to be back filled with soil with proper ramming.The nuts &bolts are to be provided by the contractor as per Nigams specfication for which the payment will be made at the prevailing Discom store issue rates. |
| 105 | PCC Poles 9 Mtr. Long(400 Kg.)/11Mtr.long |
| 106 | Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire |
| 107 | 8\\"x3/4\\" with 7/8 SWG stay wire |
| 108 | Erection & fixing of steel struts in the excavated pit in position.The top end of the strut will be properly holed/welded with the main support muffed in cement concrete of ratio 1:3:6 as per item No.5.7.The nuts and bolts will be provided by the contractor as per Nigams specification for which payment will be made at the prevailing store issue rate.The cost of muffing and grouting will be paid extra. |
| 109 | Lattice Structure |
| 110 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base. |
| 111 | Fixing of all type of fabricated material on erected supports with nut & bolts as per approved design & drawing of sub-station. |
| 112 | Fixing of 11kv B&S/T&C type disc insulator for 33kv lines (each unit consiting of 3 nos .disc.& 1set of H/W) on terminal point including fixing of hardware and strips. |
| 113 | Fixing of 33kv pin insulator with pins. |
| 114 | Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging.The contractor will be provide P.G.clamps for which payment will be made as per prevailing Discom issue rate. |
| 115 | ACSR DOG |
| 116 | Fabrication of steel structures of M.S angle, M.S.channel & M.S.Flat including cutting, drilling as per design and drawing. |
| 117 | 1.8 Mtr Channel Bracket with clamp (19.271 Kg) Please Enable Macros to View BoQ information |
