|
| 1 | Dismantling old AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and directed. |
| 2 | S&F Pre- painted galvaiume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping crews as specified complete all as specified and directed |
| 3 | S&F rolled section as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guisides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-0 or Fe310-0 including dismantling of old steel work complete all as specified and directed. |
| 4 | M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation complete all as specified and directed. |
| 5 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets, Suply & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \\"T\\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,complete all as specified and as directed. |
| 6 | M&L for 15 mm rendering in CM 1:4 on fair face of wall or on stone masonary surfaces finished even with water proofing compound (WPC) (2% of cement bag) and smooth without using extra cement complete all as specified.(WPC Measured and paid seprately) and including necessary formwork for rendering. complete all as specified and directed. |
| 7 | Supply only liquid water proofing compound ( For external plaster surfaces) complete all as specified and directed |
| 8 | M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished even and smooth ,without using extra cement, over and including dubbing coat (if required) complete all as specified and directed. |
| 9 | M&L for rendering in cement mortar (1:4) 5mm thick as in ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 10 | M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed. |
| 11 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces including surface preparation complete all as specified and directed |
| 12 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 13 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick wall care white putty on plastered surface complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper over 1mm thick wall care white putty on wall surfaces complete all as specified and directed. |
| 15 | Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed. |
| 16 | M&L for stone walling, random rubble, uncoursed, well bonded, bedded and solidly hearted and built in cement mortar (1:6) complete all as specified and directed. |
| 17 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 18 | Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed. |
| 19 | M&L for 25 mm thick cement concrete, type B-0, 1:2:4 (Using 12.5mm crushed stone aggregate), finishing cement concerete surface even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&L, for 20-25 mm thick machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4 ,rubbing , polishing complete inclu Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 21 | M&L kota stone slab 20-+25mm thick in riser of steps,skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete inlcuding 10 mm thick rendering in vertical surface of brick / PCC block wall in cement mortar 1:4 and including demolition of old kota stone dedo complete all as specified and directed. |
| 22 | Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed |
| 23 | M&L 75mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for sand filling 25mm thick under floors or in foundations inc. watering and consolidation complete all as specified and directed. |
| 25 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality including sand cushioning 25mm thick duly watering and consolidation complete all as specified and directed. |
| 26 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 27 | M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size 450x350mm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed. |
| 28 | M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 29 | M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 30 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed. |
| 31 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc 1.50sqm not exc4.00 Sqm each and complete all as specified and directed. |
| 32 | S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification complete all as specified and directed. |
| 33 | S&F for factory Solid PVC MouldedDoor Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised paneldesign with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core as per specification & drawing in the frame at site complete all as specified and directed. |
| 34 | Taking down old u/s steel window / ventilator and S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.Note : Wire mesh and sheet glass shall be measured & paid separately under respective items. |
| 35 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed. |
| 36 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 37 | S&F MS butt hinges, medium weight, cold rolled, ISI marked of size 100mm, complete all as specified and directed. |
| 38 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 39 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 40 | M&L for 18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 41 | Rounding to edges of stone slab one edge, such as steps, window cill stone, cooking platform, and other similar situations and rubbing and polishing complete all as specified and directed. |
| 42 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm including taking down old pipe line any type any size complete all as specified and directed. |
| 43 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 44 | S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 45 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 46 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 47 | Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 48 | S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 49 | S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 50 | S&F 25mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 51 | Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 52 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 53 | Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 54 | S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified and directed. |
| 55 | S&F in repair mirror of size 600 x 450 x 5.5 mm bevelled edge of selected quality PVC / aluminium moulded frames and back with fixing arrangement to wall complete all as specified and directed. |
| 56 | S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 57 | S&F in repair wash hand basins vitreous china, coloured oval type/table top size 450 x 300mm fixed including bracket, waste pipe and waste coupling complete all as specified and directed. |
| 58 | S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 59 | S&F in repairs 15mm bore cast copper alloy chromium plated fancy type bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 60 | S&F in repair fancy type angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 61 | S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed. |
| 62 | Supply and Fixing in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and directed. |
| 63 | S & F in repairs waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed. |
| 64 | S & F in repairs grating round 140mm dia stainless steel fixed to Floor trap/Nahni trap with CM 1:6 etc complete all as specified and directed. |
| 65 | Supply and Fixing in repair PVC water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed. |
| 66 | Supply and fixing in repairs for Toilet fittings Health faucet complete all as specified and directed.Make : Jaquar. (Prayag Cat No. 452) or equivalent as approved by GE. |
| 67 | S&f in repairs of 15mm bore pillar tap cast copper alloy fancy type with capston heads, chromium plated screwed down high pressure, with or without letters Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipes and fixed complete all as specified and directed. |
| 68 | Supply and fixing in repairs for Toilet fittings Two way Angle cock of 15mm bore complete all as specified and directed.Make : Prayag Cat No 9211 or equivalent as approved by GE. |
| 69 | S&F in repair rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top), Triple layer,hoisted and fixed in position complete all as specified and directed.Make: Syntex, Polycon. |
| 70 | S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and directed. |
| 71 | Excavating in trenches any type of soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation, manholes etc and n.exc 10 sqm on plan and n.exc 10sqm on plain area and getting out in any type of soil complete all as specified and directed. |
| 72 | Returning, fillings in including spreading, levelling, watering and well ramming in layers, n.exc 25cm thick in soil complete all as specified and directed. |
| 73 | Removing of excavated soils, not exc 100mtr and depositing where directed at a level n. exc 1.50mtr above the starting point complete all as specified and directed. |
| 74 | Demolition/Dismantling of existing sewage pipe line and S&F Reinforced concrete 150 mm pipes, class NP2, laid and jointed complete with collars and tested as per manufactures instruction complete all as specified and directed. |
| 75 | M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate for bed including packing under & haunching against the sides of drain pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed. |
| 76 | M & L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 77 | M&L PCC (1:2:4) type C-1 using 20mm graded aggregate as in surface channel and drain, Coping etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 78 | M&L PCC (1:2:4) type C-1 using 20mm graded aggregate as in surface channel and drain, Coping etc complete all as specified and directed. Please Enable Macros to View BoQ information |
