|
| 1 | Providing one Coil Earth using No.8 GI- earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/ structure in ordinary soil & back filling. |
| 2 | Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling. |
| 3 | Renewal of existing damaged/broken old 11KV stay with existing stay rod |
| 4 | Transporting poles by hired vehicle to a distance up to 5km and carrying up to 4 numbers of poles excluding loading & unloading charges. |
| 5 | Additional rate for providing one disc set, PG clamp etc. complete, on any type of HT pole for making cut point. |
| 6 | Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging & back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing). |
| 7 | Fitting one Additional 75x40mm, 1.8m channel cross arm in existing single pole including conveyance of materials. |
| 8 | Fitting one Additional V cross arm in existing single pole including conveyance of materials. |
| 9 | Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by ay vehicle). |
| 10 | Fitting and erecting one HT A type Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing). |
| 11 | Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing). |
| 12 | Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle). |
| 13 | Fitting and providing one HT stay for 11KV pole, including digging and back filling pit in ordinary soil. |
| 14 | Dismantling one damaged AB switch from existing structure and bringing back to section store. |
| 15 | Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing. |
| 16 | Drilling hole of various sizes on existing Channel/Cross arm |
| 17 | Dismantling (without damage) LT Stay including digging pit in all classes of soil and back filling. |
| 18 | Fitting and providing one HT Fly stay for 11KV pole using HT PSC pole including digging and black filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing). |
| 19 | Fitting and providing one strut using HT PSC pole including digging and back filling pit in ordinary soil. |
| 20 | Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires. |
| 21 | Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work. |
| 22 | Stringing of one km 3 PH 11KV line with XLPE Insulated ACSR Raccoon or equivalant (3 conductors) after fitting insulators, binding conductors to pin insulators using suitable tie and anchoring with wedge type anchoring clamps including cutting and removing tree branches wherever necessary excluding cut point works. |
| 23 | Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite. |
| 24 | Dismantling (without damage) one 11KV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same. |
| 25 | Dismantling (without damage) one HT PSC/RCC Strut pole including removal of clamps and stacking. |
| 26 | Transfering LT single phase 2/3 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete. |
| 27 | Transferring LT three phase 4/5 wire OH line newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete. |
| 28 | Additional rate for refitting/redoing one Shackle set, including reshackling one span, while renewing any type of LT pole |
| 29 | Additional rate for reinstalling Lt line on the renewed 11KV pole having both HT and LT (HT/LT) lines. |
| 30 | Dismantling (without damage) one km LT single phase 2 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly. |
| 31 | Providing stay for LT poles including digging & back filling pit ordinary soil. |
| 32 | Additional rate for providing one HT pin with insulator, complete on any type of HT pole. |
| 33 | Additional rate for excavation of one pit for HT pole/ HT stay in Hard laterite |
| 34 | Dismantling (without damage) one km LT additional conductor line by dismantling cross arms, insulators and stacking the conductors in rolls properly. |
| 35 | Dismantling ( without damage) one LT PSC/RCC pole after disconnecting stays, strut, etc. attached thereon and stacking the same |
| 36 | Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly. |
| 37 | Additional rate for refitting/redoing one disc set while renewing any type of 11KV cut pole. |
| 38 | Fitting one Additional 2.4/3 Channel cross arm (75x40x6mm), in existing 11KV DP including conveyance of materials. |
| 39 | Straightening one slanted 11kv pole after unbinding the line and binding the line after work |
| 40 | Pole numbering using printed Aluminium sheets of 22 SWG havibg size 20 x 12 cm or Painting the surface of line supports where numbers are to be inscribed, Pole numbers shall be painted in circular / rectangular background, using approved quality anti algal yellow paint in two coat after scraping and cleaning the surface at a height of 2.5 metre above ground level. The number and letters should be in black synthetic enamel paint. The size of the number should be at least 2cm in height x 1.5cm in width. including cost of paint. |
| 41 | Providing concrete muffing of size 0.45x0.45x1.5m (0.5m above GL and 1m below GL). Excavation 0.45x0.45x1m, concrete (1:3:6, 20mm)0.45x0.45x1.5m, Plastering (1:3) 12mm 0.45x0.45mx5sides |
| 42 | Cutting trees having girth beyond 30cm but upto and including 60cm (felling trees including of trunks and branches)and removing the root completely and stacking etc. 1 No. |
| 43 | Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite. |
| 44 | Dismantling (without damage) one km 11kv line (three conductors) including dismantling cross arm, inslutors, disc, disconnecting jumper connection, rolling the conductor and stacking the materials. |
| 45 | Fitting one set (3No.) 11kv LA and giving connections excluding earthing. |
| 46 | Providing bridging at cut points for 3 PH 11KV line with XLPE Insulated ACSR Raccoon or equivalent (1 conductor) using IPC respective conductors |
| 47 | Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and unloading using crane. |
| 48 | Additional rate for excavation of one pit for HT pole/HT Stay in Laterite |
| 49 | Fitting one no section fuse on LT line with dropping cables , crimping sockets, connecting with Bolt&Nut etc Please Enable Macros to View BoQ information |
