|
| 1 | Earthwork in excavation by mechnical means in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5 mtr in width) and for shafts , wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal of excavated earth upto 1mtr for cutting edges, disposed earth is to be leveled and neatly dressed in.All kind of soil |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | P/L of stone solign duly hand pacekd including watering dressing and ramming with all carraiges loading unloadin and staking etc complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Centering & Shuttering using kitply including strutting propping etc & removal of form work including all leads, lifts, costs & carriages upto site of work complete in Foundation footings, Basis of colums, Plinth beams, walls & Mass concrete |
| 9 | Centering & Shuttering using kitply including strutting propping etc Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | P/L and placing high strength deformed steel including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D or more incl all carriages upto site of work. |
| 12 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete incl carriage of all materials |
| 13 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement lime mortar 1:1 :6 ( 1 cement : 1 limeputty : 6 fine sand) |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Imported wood (KD) |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 32 mm thick. Imported wood |
| 16 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Imported wood |
| 17 | 15 mm cement plaster on the rough side of single or half brick wall of 1:6 mix (1 cement 6 fine sand) |
| 18 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 19 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick |
| 20 | finishign walls with waterproof cement paint of approved brand and manufacture of required shalde to give an even shade on new works applied @3.84kg/10sqm. |
| 21 | Applying Priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)Door/window frames and Shutters grills gates etc |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to given and even sjhade two or more coats on New work Over an under coat of new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture all complete job |
| 23 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate |
| 24 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Including 1mm thick MS Sheets for sofits and eves boarding incl all carriage of materials. |
| 25 | Providing colour coated Hi-rib profile sheet roofing of approved brand & manufacture, fixed with polymer coated steel screws bolts 100 mm long 8 mm dia with washers & plc. cap (upon a pitch of 60 degrees) excluding the cost of purloins, rafters and trusses (0.50mm thick) |
| 26 | Providing ridges/ hips /valleys 600mm overall width with GS plain colour sheets with necessary fittings |
| 27 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 28 | Providing and fixing of bright finished brass hardware fittings 125 mm Handle |
| 29 | 200 mm Handle |
| 30 | 100x10mm Tower bolt |
| 31 | 150x10mm Tower bolts |
| 32 | Stay hooks |
| 33 | L-Dop 18\\" with inbuilt Locking sustem |
| 34 | Providing and fixing of ply board 12 mm thick of approved quality and brand incl (frame wooden work of required section and necessary screws and nails, complete with wooden corinice of required section |
| 35 | carriage of bricks avg lead 210 kms from budgam Sgr by MT |
| 36 | carriage of sand /bajree 10 km by MT Please Enable Macros to View BoQ information |
