|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge All kinds of soil : |
| 2 | Providing and Laying of Stone Soling hand packed including ramming, dressing and watering etc. with all cost and carriage of materials upto site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 9 | Providing and Laying of Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20 mm nominal size stone aggregate. |
| 10 | Structural steel work welded in built up sections, trusses and framed work & soffits, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 11 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 12 | Providing and fixing with Colour coated High rib profile sheet roofing including vertical/curved surface including polymer coated J. or L hooks,fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters including Ridges, hips and valleys complete as per the directions of Incharge Engineer. 0.50mm thick including carriages by mt |
| 13 | Providing and fixing of Sofits Colour Coated GI sheets Plain incl fixing complete job incl Cost of Supporting Structure steel , strutting ,propping , nails with other necessary fittings/ fixtures complete as per the directions of Incharge Engineer. |
| 14 | Providing / fixing of prefabricated structure excluding cost of columns, beams etc structural steel having following specifications wall panells 60 mm thick with 0.63 mm hard diped galvanised steel sheets on both sides with 60 mm thick layers of ridged CFC free close cell polyurethene fom. Ceiling panells 40 mm thick made 0.63 mm hard dipped galvanised steel sheets on both sides with 40 mm layers of ridged CfC free close cell polyurethene foam |
| 15 | Providing and fixing powder coated onodized aluminium work for window and door frames with bother shutters of glazed and wire gauge of standard to sections of approved make fixed with sand plugs and screws or disposed fixtures including ACP boarding for pannels, sliding/fixed incl carriage complete as per directions of Engineer Incharge. |
| 16 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 17 | Providing and fixing of aluminium fittings ISI marked of standard brand and make with necessary screws etc complete as per the directions of Incharge Engineer. |
| 18 | Handle 150mm |
| 19 | Handle |
| 20 | Tower Bolts |
| 21 | Aldrop 300mm with locking arrangement of reputed brand |
| 22 | Providing and fixing of following PVC pipes (Prince/ Supreme make) having pressure 4kgN/cm including cuttings and making good the walls wherever required all complete as per the directions of Incharge Engineer. 75mm dia |
| 23 | Providing and fixing of following PVC pipes (Prince/ Supreme make) having pressure 4kgN/cm including cuttings and making good the walls wherever required all complete as per the directions of Incharge Engineer. 100mm dia |
| 24 | Providing and fixing of C.P fittings of approved brand and make (Parko, Jaquar or equivalent brand) including all fittings complete. |
| 25 | Bibcock |
| 26 | Angle Valve |
| 27 | C.P Nipple |
| 28 | C.P connection 450mm long |
| 29 | Soap Case |
| 30 | Towel Hooks |
| 31 | Mixer |
| 32 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 33 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 34 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 40mm pipes |
| 35 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 32mm OD(SDR-7.4) |
| 36 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 37 | Wiring for light point / exhaust /ceiling fan point with (P+N) 2X1.5 sq.mm FRLS- H ( Polycab/Havells/eqt make as approved by site engineer),PVC insulated copper conductor single core cable in surface / recessed Conduits (Anchor/polycab/Ravindra/equivalent make as approved by site engineer) , with 6Amp .modular switch/5amp socket (Anchor roma urban/GM//legrand mylinc/SSK /ABB Tvisha make as approved by site engineer), modular plate, cover in front and suitable GI box etc of approved quality and make ISO/IEC Certified (quality of wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) job including cost of Circuit Wire in 2.5Sqmm Multi strand Copper wire from Switch board to D.B complete. including cost of Conduits. |
| 38 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Havells/Polycab/ Make) (Including Cost of Conduit/Channel) |
| 39 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified (Anchor roma urban/legrand Mylinc/SSK NV/ABB Tvisha make & shall be approved before execution of work. |
| 40 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified (Anchor roma urban/legrand Mylinc/SSK NV/ABB Tvisha make & shall be approved before execution of work. |
| 41 | SINGLE POLE (6-32Amp) MCB Legrand /Havells or L&T /Schneider/ABB |
| 42 | Supply installation testing and commissioning of 18 W + LED Surface Mounted Panel light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. |
| 43 | Wiring for heating ponit with (P+N) 2X1.5 sq.mm FRLS- H ( Polycab/Havells/eqt make as approved by site engineer),PVC insulated copper conductor single core cable in surface / recessed Conduits (Anchor/polycab/Ravindra/equivalent make as approved by site engineer) , with 16Amp .socket (Anchor roma urban/legrand mylinc/SSK NV/ABB Tvisha make as approved by site engineer), modular plate, cover in front and suitable GI box etc of approved quality and make ISO/IEC Certified (quality of wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) job including cost of Circuit Wire in 4qmm Multi strand Copper wire from Switch board to D.B complete. including cost of Conduits. |
| 44 | Providing and fixation of 10mm ply including all necessary fittings and fixtures, nails, cornice and painting with synthetic enamel paint and carriage of materials upto site of work complete as per the directions of Incharge Engineer. |
| 45 | Carriage of materials from approved source to site of work complete. |
| 46 | Stone aggregate for an average lead of 10Kms |
| 47 | Sand for an average lead of 20Kms Please Enable Macros to View BoQ information |
