Tender For Construction Of R And B Section Office At Jharigam In The District Of Nabarangpur (Building), Jharigam-Odisha

TDR : 55004951

Tender Notice
BOQ

3 Days Left

Jharigam , Odisha

Tender Brief : Tender For Construction Of R And B Section Office At Jharigam In The District Of Nabarangpur (Building)

Document Fees
₹ 10000 /-

EMD
₹ 87100.0 /-

Tender Value
₹ 87.01 Lakhs /-

Submission Date
22-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil Work
2	Earthwork in hard soil or gravelly soil with 50m initial lead and lifts including breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 mtrs in depth leveling dressing the bed and removing all foreign materials including roots, brushes and depositing the soil in layers and rolling for ordinary compaction as directed by the Engineer-In-Charge.
3	Building
4	Boundary Wall
5	Filling in foundation trenches and plinth with sand well watered and rammed in layers not exceeding 23cm. in depth with all leads and lifts including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
6	Building
7	Boundary Wall
8	Cement concrete of proportion (1:3:6) in foundation and floors using 4cm. size hard black hand broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering and curing etc. complete to required levels laid in layers not exceeding 15cm (6 Inch) thick including cost, conveyance, royalties and taxes of all materials and cost of all labours, watering and curing, sundries and T&P required for the work etc. complete as directed by Engineer-in-charge.
9	Building
10	Boundary Wall
11	Fly Ash Brick masonry in cement mortar (1:6) in foundation & plinth using Flay Ash bricks of 23cm x11cm x 8cm size having a crushing strength not less than 75Kg per Sq.Cm, including splays cutting, circular moulding, chamfering, corbelling, watering and curing including cost, conveyance, royalties, taxes of all materials and labour with T & P required for the work etc. complete in all respect in all floors.
12	Building
13	Boundary Wall
14	Reinforced cement concrete of M-20 grade having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 20 mm. size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 4 (Four) weeks, centring, shuttering and finishing the exposed surface smooth, providing grooves and beeds where necessary including cost, conveyance, royalties and taxes of all materials and cost of all labours, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in in proper position in all floors as directed by the Engineer in charge.
15	Column Footing
16	Building
17	Boundary Wall
18	Column Upto Plinth Beam
19	Building (G.F.)
20	Column Upto Slab (G.F.)
21	Boundary Wall
22	Column Upto Slab (F.F.)
23	Column Upto Slab (Terrace Floor)
24	Grade Beam
25	Building
26	Boundary Wall (Plinth Beam)
27	Lintel
28	Ground Floor
29	First Floor
30	Terrace Floor
31	Chajja
32	Ground Floor
33	First Floor
34	Terrace Floor
35	Roof Beam
36	Ground Floor
37	First Floor
38	Terrace Floor
39	Roof Slab
40	Ground Floor
41	First Floor
42	Terrace Floor
43	Stair Case
44	Ground Floor
45	First Floor
46	Supplying, Cutting, Straightening coiled or bent up M.S. rods or Tor steel of JINDAL / SAIL welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, etc. complete in all respect as directed by the Engineer-in-charge.
47	Building (G.F.)
48	Boundary Wall
49	First Floor
50	Terrace Floor
51	Fly Ash Brick masonry in cement mortar (1:6) in Superstructure using Flay Ash bricks of 23cm x11cm x 8cm size having a crushing strength not less than 75Kg per Sq.Cm, including splays cutting, circular moulding, chamfering, corbelling, watering and curing including cost, conveyance, royalties, taxes of all materials and labour with T & P required for the work etc. complete in all respect in all floors.
52	Building (G.F.)
53	Boundary Wall
54	First Floor
55	Terrace Floor
56	2.5Cm.(1 Inch) thick grading concrete with cement (1:2:2) using 6mm & downgraded size over roof slab to proper slope finished smooth, watering and curing including cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.
57	First Floor
58	Terrace Floor
59	12mm.(1/2 Inch) thick cement plaster (1:6) finished smooth to brick work after racking out joints including watering and curing , cost, conveyance, royalties and taxes of all materials, labour with T & P required for the work etc . complete in all respect in all floors.
60	Building (G.F.)
61	Boundary Wall
62	First Floor
63	Terrace Floor
64	16mm.(5/8 Inch) thick cement plaster (1:6) finished smooth to brick work after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T & P required for the work etc. complete in all respect in all floors.
65	Building (G.F.)
66	Boundary Wall
67	First Floor
68	Terrace Floor
69	Providing, Fitting & Fixing of False Ceiling with aluminium anodized T Section No. 3215 with 2 Feet 0 Inch Center to Center, L Section No. 1705 Upto 15 Micron of 4 walls to be fixed by means of steel screw & pvc plug and the aluminuim grid 2 Feet 0 Inch x 2 Feet 0 Inch suspended from ceiling etc. complete including cost, conveyance, taxes of all materials and labour etc. complete in all respect as per direction of the Engineer-In-Charge.
70	Ground Floor
71	First Floor
72	Providing Fitting & Fixing of Cornice for Gypsum Board Ceiling of approved design by means of steel screws including cost, conveyance, taxes etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-In-Charge
73	Finishing wall surfaces with cement based wall putty (water based) of approved make and finished smooth to receive painting including cost of scaffolding, staging charges with cost & conveyance of all materials taxes labour T & P etc complete as directed by Engineer-In-Charges.
74	Ground Floor
75	First Floor
76	Terrace Floor
77	Supplying, fitting and fixing in position dressed and well seasoned salwood work framed and fixed (Wrought and put up) in trusses, purlines frames for A.C. Sheet, Choukaths, windows and ventilators including cost of iron work including cost of coal tar, cutting grooves and mending to size where necessary with cost, conveyance, royalities, taxes of all materials etc. complete in all respect in all floors as directed by the E.I.C.
78	Ground Floor
79	First Floor
80	Terrace Floor
81	Supplying, fitting and fixing of 30mm thick flush door shutters conforming to IS 2002 ( Part-I) Decorative type, core block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos. of stainless steel butt hinges (100mm x 60mm x 25mm) 40mm stainless steel screws, cylindrical lock (Godrej-9843) etc complete including all cost, conveyance and taxes of all materials, labour with T & P etc required for the work complete as directed by the Engineer-In-Charge.
82	Ground Floor
83	First Floor
84	Supplying, fitting & fixing of window (sliding type made up alminum section) 9778, as windows frame section No.4094, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour T & P etc complete as per direction of Enginner -in charge.
85	Ground Floor
86	First Floor
87	Supplying, fitting and fixing of M.S. Grills for window and gate M.S.Door, M.S.Window, of approved design in proper position and making good to the damages to wall or R.C.C. Structure including mending or cutting to sizes or grooves in walls and fixing with C.C (1:2:4) with cost, conveyance, royalities and taxes of all materials with all labour, T&P required etc complete in all floors.
88	Ground Floor
89	Boundary Wall
90	First Floor
91	Terrace Floor
92	Supplying, fitting and fixing of vetrified tiles of premium grade having thickness 8mm to 10mm of 60Cm x 60Cm plain size (Homogenous) in floors, treads or steps and landing on 25mm thick bed of cement mortar, cement and sand (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer-In-Charge.
93	Ground Floor
94	First Floor
95	Providing, fitting & fixing of Vetrified tiles (Homogenous) of approved quality in dados, skirting and rises of steps on cement plaster 1:3 (1 Cement : 3 Sand) jointed with neat cement slurry mixed with pigment to match the slabs of the tiles including rubbing, polishing with cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer-In-Charge.
96	Ground Floor
97	First Floor
98	Providing fitting & fixing of Granite tiles in floors, treads or steps and landing on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Sand) filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-Charge. (First Floor)
99	Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 Mtr. Center to Center and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials labour, T & P etc required for the work complete in all respect as directed by the Engineer in charge.
100	Priming one coat to wall surface using water bound cement primer including cost, conveyance, taxes of all materials paint labour T&P etc complete in all respect.
101	Ground Floor
102	Boundary Wall
103	First Floor
104	Terrace Floor
105	Wall painting two coats with plastic emulsion paint of approved shade on new work to give and even shade including cost, conveyance, taxes of all materials paint labour T&P etc complete in all respect.
106	Ground Floor
107	First Floor
108	Terrace Floor
109	Painting two coats with any approved paint over a coat of primer to wood work & iron work (Old & New) including cost, conveyance, royalties and taxes of all materials and labour with T&P required for the work in all floors including cost of paint and primer etc. complete.
110	Ground Floor
111	Boundary Wall
112	First Floor
113	Terrace Floor
114	Painting two coats with weather seal over a coat of primer after cleaning the surface including cost, conveyance, taxes of all materials, cost of all labour with T & P etc required for the work etc complete in all respect.
115	Ground Floor
116	Boundary Wall
117	First Floor
118	Terrace Floor
119	E.I. Works
120	INTERNAL WIRING.
121	Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked Make-Anchor/Polycab/Havells/RR KABLE in 20 mm dia HMS FRLS PVC conduit ISI Marked Make-Anchor/Polycab with 6 Amp modular type (anti bactorial & flame retradant type ) switch ISI marked Make-Schneider(Zencelo)/Legrand(Myrius-NEXT GEN)/Panasonic(Vision)/Havells of suitable modular box , 250 V clip in type switch , ceiling rose with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havels) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Equivalant.) With 10Years Warenty.
122	Group C
123	Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels) Average Length: 3 mtr
124	Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/eq) Group B
125	Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels/eq) Group C
126	Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked Make-Legrand(Myrius-NEXT GEN)/Havells/Panasonic (Vision) mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.
127	Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked Make-Legrand(Myrius-NEXT GEN)/Havells/Panasonic (Vision) in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Finolex /Polycab/ Anchor / Havels/eq) Group C
128	Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked Make-Legrand(Myrius-NEXT GEN)/Havells/Panasonic (Vision) mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.
129	Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked Make-Legrand(Myrius-NEXT GEN)/Havells/Panasonic (Vision) mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.
130	Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision)/Havells All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
131	Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 no 6A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision)/Havells All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
132	Supply and installation of 25 A AC Starter Modular type ,Make-Havells/Schneider /Siemens/Legrand Coil Voltage-230 Volt A.C on Modular Box of Suitable size including modular cover as required as per direction of engineer in charge.All the Components should be Warrantied for a replacement period of 2 years against defects with necessary test report & Warranty Certificate to be submitted to the department for genuinity of product & to avail free aftersales service within Warranty period for acceptance of materials.
133	Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/eq) Group C
134	Supply and fixing CALL BELL (Ding Dong type)/Buzzer on the existing switch box/Cover.(Make-Havells/Anchor) as per direction of engineer-in-Charge.All the Components should be Warrantied for a replacement period of 2 years against defects with necessary test report & Warranty Certificate to be submitted to the department for genuinity of product & to avail free aftersales service within Warranty period for acceptance of materials.
135	SUBMAIN.
136	Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/eq)(2 Sub Main DB to Panel)
137	Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels)
138	Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/eq)
139	Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/eq) (For Switch Board Looping)
140	1x1.5mm2 for inverter wiring
141	Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.
142	Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For PDB/LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63A FP MCB (10KA) Outgoings-10/20A SP MCB 10KA-12Nos.(Make-Legrand/Eq)
143	Supplying and fixing 40 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 1 year
144	Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 8 way SPN Distribution Boards For UPSDB complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A DP MCB (10KA) Outgoings-6-32A SP MCB 10KA-6Nos.(Make-L&T/ Schneider/Legrand/Eq)
145	CABLE .
146	Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 35sq.mm Aluminium on surface as required.(Make-polycab/RR Kable/Rhino cable/eq)
147	Supply and fixing PVC Aluminium armoured XLPE 2 C X10 Sq.mm Cables insulated ISI marked.(Make-Havells/Polycab/KEI/RR)
148	S/F of Gate light jally duly fabricated at well mounted with C.C masonary work etc.
149	END TERMINATION
150	Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
151	4C x 35 sq.mm
152	PANEL
153	Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete.MAKE- Legrand / Schneider/ L&T/Hager/Eq.
154	MAIN PANEL with 100A 4P MCCB 25 KA -1 No as incomer, 1Nos Three Phase Energy Meter,3 Nos 63A 4P MCB C-Series , 100 A 4P Change over switch-1Nos, 40 A DP MCB C-Series -1Nos, 20A DP MCB 10KA-3Nos,3 PH Energy Meter . with E.C Busbars with 4nos 65KA VSD along with 4nos 32A SP MCB as per direction of Engineer-in -charge.
155	EARTHING
156	Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
157	Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
158	Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
159	Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.
160	Supply and making brick massonary pedastal with extra super structure including cement plastering with EARTH PIT Written on1.5x1.5 flat GI Plate chanel attached with rod as required as per direction of Engineer-in-charge.
161	FIXTURE
162	Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.Make-JAQUAR/philips/wipro/Equivalant.
163	Supply & fixing of 20 W LED Tube Light similat to Jaquar Cat no-LGLZU1X022XW/Havells/Eq. model of Bajaj/Eq.with all accessories.
164	Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of not more than 24W and system lumens output not less than 3120 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years.
165	Supply, Installation, Testing and Commissioning of 400mm wall mounted fan (Make-Bajaj /Usha/crompton).
166	Supply & fixing of Ceiling/ Wall mounted type BULK HEAD Luminaire with Similar to Jaquar Cat No.LBLK02X010XW or equivalent.
167	S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
168	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery Greater or Equal to 215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Atomberg ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.
169	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand Myrius /Schneider(Zencelo)/Panasonic(Vision)/Havells)
170	Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.Model-Usha AEROCLEAN.
171	Supply & fixing of 12W LED Down Square Light (S/R) similat to Jaquar Cat no-LNRO02S012SW/Eq. model of Bajaj/Eq.with all accessories..
172	Surface/Recess LED Light fitting (1500 Lumen) of make BAJAJ (CAT No:BGSLO SLEEK SURFACE 15W WH SQ) / Equivalent of Philips/Lighting Technologies.
173	Supply & fixing of 70W LED Street Light for Building Premises light similar to JAQUAR CAT NO-LSRT015070XW /Equivalant With all accessories.
174	Supply and fixing of LED Gate light Ruby LED POST TOP bearing Item description RUBYPT40WLED757PSYMTOPC(Make-Havells/Crompton/Panasonic )
175	Supply ,Installation ,Testing and Commission of Inverter, Cruze UPS 2KVA-24V( make - luminous/ Exide/Microtec)
176	Supply,Installation,Testing and Commission of Inverter Battery 12V 150AH ( make -Exide/ Luminous)
177	Supply of Inverter stand (make-Microtech /Luminous)
178	Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
179	Supply, Installation, Testing and Commissioning of GeM Specification 15 KVA CPCB IV+, 415 Volt ( 3 phase) D.G. Set comprising of Cummins make Engine model X2.5-G6 Developing 25.2 BHP and 15 KVA Stamford make Alternator mounted on a common base complete with Fuel Tank, Battery and leads, AMF Control Panel,Residential Silencer ,First fill of lube oil,AVM Pad,Acoustic Enclosure ,PSO 602 as per GeM specification as per direction of engineer-in-Charge.(Make:-Jackson/Kirloskar/Mahendra ..).
180	Scope of Installation:-Installation,testing and Commissioning of 15 KVA CPCB IV+,3 Ph ,415 V DG Set,Silent Smokeless with AMF Panel including a. DG set PCC Foundation : Length 8 ft x Width 4 ft. Height: 6 inches under ground and 6 inches over ground-1 No. b. POWER CABLE : 16 SQ. MM 4 CORE Copper - upto 20 MTRS. c. CONTROL CABLE: 2.5 SQ MM 4 CORE copper - upto 12 MTRS. d. PLATE EARTHING with strips and connection - 4 NOS. e. DIESEL FOR TEST RUN: 35 LTRS. For testing and other accessories for completion of the instation job. f. UNLOADING & SHIFTING OF THE DG SET ON FOUNDATION. g. Shed for DG set Length 8 ft x 5 ft. height. h. Changeover of 65 amp. - 1 no.
181	SAFETY EQUIPMENTS
182	Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.
183	TV /DATA
184	Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
185	Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
186	Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
187	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
188	20mm dia C-PVC pipe SDR-11
189	Ground Floor
190	First Floor
191	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 of the following nominal bore, tube fittings and clamps including making the wall good, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
192	25mm dia uPVC pipe Sch-80)
193	Ground Floor
194	First Floor
195	32mm dia uPVC pipe Sch-80)
196	First Floor
197	Second Floor
198	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Hindware/ Cera/ Parryware make)
199	15mm dia CP angle stop cock
200	15mm dia CP Two way bib cock
201	15mm dia CP SB bib cock
202	15mm dia CP long Body bib cock
203	20mm dia CP concealed stop cock
204	15mm dia CP Pillar cock
205	25mm dia CP Health Faucet
206	25mm dia brass full way valve (Shakti make)
207	32mm dia brass full way valve (Shakti make)
208	15mm CP Extension piece
209	125mm CP grating
210	15mm size C.P. flange
211	Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
212	2000 liters capacity PVC water storage tank roof of 1st Floor
213	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
214	Ground Floor
215	First Floor
216	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
217	Ground Floor
218	First Floor
219	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
220	Ground Floor
221	First Floor
222	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
223	110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
224	80 mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
225	110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make)
226	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
227	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
228	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
229	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
230	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
231	110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
232	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
233	75mm U-PVC plain bend(Ori Plast/Finolex/Supreme Make)
234	75mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
235	75x75x75mm U-PVC double equal door Tee(Ori Plast/Finolex/Supreme Make)
236	75mm U-PVC vent cowl(Ori Plast/Finolex/Supreme Make)
237	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
238	580mm size Orissa pan (Hindware/Parrywaremake)
239	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
240	European water closet with 'S' trap plain(Hindware/Parryware/Neycer make)
241	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
242	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
243	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
244	550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
245	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
246	20mmx600mm long CP towel rail
247	CP towel Ring
248	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
249	CP soap holder
250	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
251	600 x 125mm plate glass shelf with CP guard rails
252	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
253	600mmx450mm size Frammed mirror
254	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
255	CP revolving Shower (bend Type)
256	Supplying all materials, labour, T&P for fitting & fixing plain Kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24 Inch x 18 Inch x 10 Inch sink
257	Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
258	Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
259	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
260	First Floor
261	Supplying all materials labour & laying the waterproofing material of Dr. fixit torch shield P3160(3mm) with its primer 2 coats or equivalent water proofing materials after drying cleaning the concrete surface over the concrete floor/roof/balcony/ sunken and dado upto1'6\\" in wall including cleaning, applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to worksite etc. all complete as per the direction of the Engineer- in- charge.
262	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
263	First Floor
264	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )
265	Kajaria/Somany/Johnson tile 30cmx30cm
266	Ground Floor
267	First Floor
268	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
269	Ground Floor
270	First Floor
271	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
272	Kajaria/Somany/Johnson tile 45cmx30cm
273	Ground Floor
274	First Floor
275	Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10
276	4 x 0.75 x 2.10
277	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
278	110mm dia u-pvc pipe alround concrete
279	Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
280	Inside size 76cmx76cmx46cm with 18 Inch dia RCC MH cover
281	Supplying all materials labour T&P and constructing 1.20m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
282	1 no 20 Users Septic Tank
283	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
284	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
285	Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge..
286	Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete.
287	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
288	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
289	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
290	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
291	RCC floor, roof slab chhaja up to 4.430 m height
292	Supplying all materials.labour.T&P and providing brick work in foundation and plinth with 23cmx11cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:6 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
293	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
294	Supplying all materials,labour,T&P and providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
295	Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
296	Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
297	8,000 ltr capacity R.C.C. Under ground sump of in side size (2.00m x 2.00m x 2.00m)
298	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
299	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
300	Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC.
301	Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
302	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
303	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
304	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
305	RCC floor, roof slab chhaja up to 4.430 m height
306	Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
307	Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
308	Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
309	Construction of 1 nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
310	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
311	Drilling of 200mm dia bore
312	00 mtr to 30mtr
313	30 mtr to 40mtr
314	Drilling of 150mm dia bore
315	41 mtr to above
316	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
317	Lowering of 200mm dia P.V.C casing pipes
318	00 mtr to 30 mtrs
319	30 mtr to 40mtr
320	Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
321	200mm dia PVC (sch-80) pipe
322	Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
323	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
324	By DTH Rig
325	Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
326	Rocky terrain with boulder formation for 300m depth
327	Supplying all materials, labour, T&P and providing fittings and fixing submersible pump with squarrel cage induction type submersible electric motor to run on 3 phase / single phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specification with suitable control panel, jointing with GI / PVC / HDPE pipes, electrification, testing commissioning, trial running, conveyance of all materials to worksite, payment to taxes etc all complete as per the specification and direction of the Engineer in charge. (Texmo / Crompton Greaves / Kirloskar make)
328	1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
329	DOL Control panel
330	40mm dia steel short piece
331	Well cap
332	50mm size CI bracket
333	2.50sqmm flat cable
334	20mm dia rigid UPVC pipes
335	Steel rope with cover
336	Labour charges for lowering including transportation
337	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
338	32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of R And B Section Office At Jharigam In The District Of Nabarangpur (Building), Jharigam-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of R And B Section Office At Jharigam In The District Of Nabarangpur (Building), Jharigam-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us