Tender For Construction Of New Building For Rws&S Sub-Division & Section Office Boipariguda Under Boipariguda Block In The District Of Koraput (Constn/789-Scp/796-Tasp-0182- Construction Of Bldgs)., Koraput-Odisha

TDR : 55004840

Tender Notice
BOQ

Expired

Koraput , Odisha

Tender Brief : Tender For Construction Of New Building For Rws&S Sub-Division & Section Office Boipariguda Under Boipariguda Block In The District Of Koraput (Constn/789-Scp/796-Tasp-0182- construction Of Bldgs).

Document Fees
₹ 10000 /-

EMD
₹ 113000.0 /-

Tender Value
₹ 1.12 Crore /-

Submission Date
16-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	BUILDING PROPER
2	Earth work in excavation in ordinary soil including rought dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge.
3	Supplying, filling in foundation & plinth with sand in 15cms. (9\\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge.
4	Supplying all materials, labour T&P providing CC(1:3:6) work using 4 mm size hard black broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect but excluding cost of MS rods or Tor steel and binding wires of 18 to 20 gauge as per specification and direction of the Engineer in Charge.
5	Supplying all materials, labour T&P providing R.C.C. (1:2:4) work using 12mm size hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete watering and curing for four weeks, finishing the exposed surface smooth including cost conveyance taxes and royalty of all materials and labour with T&P required for the work etc, complete in all respect .as per specification and direction of the Engineer-in-charge.(Plinth Bend)
6	Supplying all labour, T&P and materials and providing brick work with Fly ash Bricks in c.m (1:6) in foundation & plinth using well burnt Fly ash bricks of size 25cm x 12cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. (Foundation & plinth)
7	Supplying , all materials, labour and T&P for providing 2.5cm thick Damp proof course with cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of wall including watering and curing with cost, conveyance,royalities and taxes and all materials and labour with T&P required for the work etc, complete in all respect .as per specification and direction of the Engineer-in-charge.
8	Providing cement concrete M-20 for with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying including cost, conveyance and royalty of all materials and cost of all labour T&P etc complete and including cost of centering & shuttering materials etc all complete in all respect as per direction of the Engineer-in-charge.
9	Footing
10	Plinth Beam
11	Column S/S
12	1st Floor
13	Head room parapet wall (main building)
14	Lintel Ground floor
15	1st Floor
16	Chajja
17	1st Floor
18	Head room
19	Ground Floor
20	1st Floor
21	Roof Beam
22	1st Floor
23	Head room
24	Roof Slab
25	1st Floor
26	Head room slab
27	Stair case
28	1st Floor
29	Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge.
30	Ground Floor
31	1st Floor
32	Head Room
33	Supplying all labour, T&P and materials and providing brick work with Fly ash Bricks in c.m (1:6) on Supperstructure using well burnt Fly ash bricks of size 25cm x 12cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge.
34	Ground Floor
35	1st Floor
36	Head Room
37	Supplying all labour, T&P and materials and providing brick work with Fly ash Bricks in c.m (1:4) on Supperstructure using well burnt Fly ash bricks of size 25cm x 12cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge.
38	Ground Floor
39	1st Floor
40	Head Room
41	Supplying all labour, T&P and materials and providing 12mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge.
42	Ground Floor
43	1st Floor
44	Head Room
45	Supplying all labour, T&P and materials and providing 16mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge.
46	Ground Floor
47	1st Floor
48	Head Room
49	Supplying all labour, T&P and materials and providing 12mm (1/2\\") thick cement plaster (1:4) finished smooth with cost and conveyance of all materials as per specification and direction of the Engineer-in-charge.
50	Ground Floor
51	1st Floor
52	Head Room
53	Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge.
54	Ground Floor
55	1st Floor
56	Providing fixing & fitting chequared tiles of approved quality of size 10\\" x10\\" in floor etc, complete & as per the direction of the Engineer-in-charge.
57	Supplying all labour, T&P and materials and providing 20mm. thick cement plaster in cement mortar (1:4) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge.
58	Providing & fixing (Glazed) tiles in all floor & treads of steps & landing on 25 mm thick bed of cement mortar in proportion (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge.
59	Supplying all materilas , labour T& P for fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS : 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved including cost of all materials etc complete. as per direction of EIC.
60	Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge.(Dados)
61	Ground Floor
62	1st Floor
63	Providing, fixing tiles in dados skirting and risers of steps on 12mm. thick cement plaster(1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge.(Kota)
64	Ground Floor
65	1st Floor
66	Providing fixing & fitting of Gypsum ceiling to rooms including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge.
67	Ground Floor
68	1st Floor
69	Providing, fixing of fixed ventilators of approved make to be fabricated 18x25mm Accessories/gaskets are to be used as per the manufacurer's completed including rubbing & polishing with cost, conveyance of all materials royalty, taxes etc, complete & as per the direction of the Engineer-in-charge.
70	Ground Floor
71	1st Floor
72	Factory made FRP (alternately called GRP) doorframe of size 75mmx 100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gel coat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The doorframe consists of four segments in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw bolding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six.
73	Ground Floor
74	1st Floor
75	Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain linisti fabricated using UV-stabilised Isopthalic Gelcoat and one polyester resin The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS) structural foam panel of 29mm thickness and a density of 20kg/cu mtr shall be used as core material Wooden.
76	Ground Floor
77	1st Floor
78	Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlins frames of doors windows ventilabour and beams.etc, complete & as per the direction of the Engineer-in-charge.
79	Ground Floor
80	1st Floor
81	Providing litting & fixing of Al door with OEL anodized Al door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick prelaminated board in botttom and top porzion fixed on door frame by means of tapered clip No. 4660 and frame to be completed it means of jointing angle No. 1855 including all cost of labour T & P hire charges of drilling machine labour charges etc.
82	Ground Floor
83	1st Floor
84	Supplying, fitting & fixing fully glazed aluminum framed openable windows using 15 micron anodized OEL aluminium sexion 2082 as out section, 9139 as mulion section, 4124 as a shutter section frame with tarpered clip of section 4125, aluminium angle, rubber beading, friction stay and handle etc with 5mm etc, complete & as per the direction of the Engineer-in-charge.
85	Ground Floor
86	1st Floor
87	Supplying, fitting and fixing of Stainless steel of 304 grade hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm 2 mm @ in 0.90 mtr. C/C stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows stair case as per approved design etc, complete & as per the direction of the Engineer-in-charge.
88	Ground Floor
89	1st Floor
90	Filling of surplus excavated earth at work site by initial lead of 50.00mtr and initial lift of 1.50mtr including cost of all labour T&P required for the work etc. complete as directed by Engineer-In-Charge
91	Removal of Unserviceable Soil with Disposal upto 1000 metres Qty. Vide 2/3 of Item No-I
92	Supplying of M.S. Grills, M.S.Doors, M.S. Gate etc including cost.conveyance of all materials etc. complete as per the instruction of Engineer-in-Charge.
93	Ground Floor
94	MS Gate
95	MS Grills
96	1st Floor
97	Head Room
98	Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering polishing the surface, cost, conveyances, taxes of all materials and cost of all labout with T&F exc, complete as per specification & direction of Engineer in Charge.
99	Ground Floor
100	1st Floor
101	Head Room
102	Finishing plastered surfaces of walls with cement putty (water based) of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, convevornice taxes of all materials, cost of all labour, all T&P etc. required
103	Ground Floor
104	1st Floor
105	Head Room
106	Distempering two coats to walls with distemper of approved shade on new work including cost, conveyance, taxes of all materials, cost of all labour, T&P
107	Ground Floor
108	1st Floor
109	Head Room
110	Painting two coats to new Iron work with approved enamel paints of approved colour, shade over a coat of primer including sand papering.
111	Ground Floor
112	1st Floor
113	Supplying all material, labour, T&P and providing grading concrete with C.C(1:2:2) using 06mm. Size hard stone broken chips of approved quality including hpisting and laying not exceeding 25mm. thick with proper packing and required slope, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge.
114	1st Floor
115	Head Room
116	Providing, Fitting & Fixing of 100mm dia PVC Rain water pipe with cost. conveyance, royalties and taxes of all materials with cost of all labour and T&P required for the work etc complete in all respect as directed by the Engineer in charge
117	Sub-Total
118	CONSTRUCTION OF COMPOUND WALL
119	Earth work in excavation in stoney earth including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge.
120	Supplying, filling in foundation & plinth with sand in 15cms. (9\\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge.
121	Supplying all materials, labour T&P providing CC(1:3:6) work using 4 mm size hard black broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect but excluding cost of MS rods or Tor steel and binding wires of 18 to 20 gauge as per specification and direction of the Engineer in Charge.
122	Supplying all labour, T&P and materials and providing brick work with Fly ash Bricks in c.m (1:6) in foundation & plinth using well burnt Fly ash bricks of size 25cm x 12cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge. (Foundation & plinth)
123	Providing cement concrete M-20 for with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying including cost, conveyance and royalty of all materials and cost of all labour T&P etc complete and including cost of centering & shuttering materials etc all complete in all respect as per direction of the Engineer-in-charge.
124	Column base Footing
125	Column base Super Structure
126	Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge.
127	Supplying all labour, T&P and materials and providing brick work with Fly ash Bricks in c.m (1:6) on Supperstructure using well burnt Fly ash bricks of size 25cm x 12cm x 8cm including cost, conveyance, royalty of all materials as per specification and direction of the Engineer-in-charge.
128	Supplying all labour, T&P and materials and providing 12mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge.
129	Supplying all labour, T&P and materials and providing 16mm. thick cement plaster in cement mortar (1:6) for stone workand conveyance of all materials as per specification and direction of the Engineer-in-charge.
130	Supplying of M.S. Grills, M.S.Doors, M.S. Gate etc including cost.conveyance of all materials etc. complete as per the instruction of Engineer-in-Charge.
131	Supplying all labour, T&P and materials and finishing walls with cement paint two coats of approved paint shell lime with cost, conveyance, royalties and taxes of all the materials and labour with T&P required for the work etc, complete in all respect in all floors as per approved colour & specification as per direction of the Engineer-in-charge.
132	Supplying all labour, T&P and materials and painting enalmel paints two coats with any approved paint & over a coat of promer to new iron work including paint sand papering, polishing the surface, with cost conveyance and taxes of all materials and labour with T&P required for the work etc, complete in all respect as per specification and direction of the Engineer-in-charge.
133	Filling of surplus excavated earth at work site by initial lead of 50.00mtr and initial lift of 1.50mtr including cost of all labour T&P required for the work etc. complete as directed by Engineer-In-Charge
134	Sub-Total
135	CONSTRUCTION OF DRAIN
136	Earth work in excavation in stoney earth including dressing, leveling the bed upto required depth & within initial lead of 50mtrs & 1.5mtrs initial lift breaking clods to maximum size (5 to 7cm) laying in layers not exceeding 0.30mtrs in depth etc. complete including cost of all labour, T&P, pipes, fittings and specials etc.required for completion of the item as per specification & direction of Engineer in charge.
137	Supplying, filling in foundation & plinth with sand in 15cms. (9\\") thick layers with the cost conveyance royalties, taxes of the materials complete as per specification and direction of the Engineer-in-charge.
138	Supplying all materials, labour T&P providing CC(1:3:6) work using 4 mm size hard black broken granite stone chips including cost, conveyance, royalty & taxes etc, completed in all respect but excluding cost of MS rods or Tor steel and binding wires of 18 to 20 gauge as per specification and direction of the Engineer in Charge.
139	Providing cement concrete M-15 for with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying including cost, conveyance and royalty of all materials and cost of all labour T&P etc complete and including cost of centering & shuttering materials etc all complete in all respect as per direction of the Engineer-in-charge.
140	Length
141	Providing cement concrete M-20 for with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying including cost, conveyance and royalty of all materials and cost of all labour T&P etc complete and including cost of centering & shuttering materials etc all complete in all respect as per direction of the Engineer-in-charge.
142	Length
143	Straightening bend up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor Steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. Rods or Tor Steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc, complete in all floors as per specification and direction of the Engineer-in-charge.
144	Sub-Total
145	INTERNAL ELECTRICAL WORKS
146	Recessed wiring to Light points/fan points/ Exhaust fan/Call bell in 20mm dia non-metalic flexible Polythine conduit, confir-ming to IS-6946/1973 with 1.5mm² 1.1KV in-sulated, S.C. multistrand HR FR copper wire of ISI marked, confirming to IS-694/1990 and earth continuity in 1.5mm² S/C. Multistrand Cu. wire with Modular switch board of size 150 mm x 200mm x 62mm made of 1.22mm thick G.I. Modular Box including provn. of earth screw, painted with one coat of DA grey enamel paint confirming to IS-5133 Part-I 1969 with 3mm thick Modular front cover fixed with steel screw including supply and fixing of 5A, 250V., Modular switch of Anchor/L&T /Legrand make, confirming to IS-3854/1997 and ceiling rose of ISI marked confirming to IS-371/1999 mounted on C.I. circular box having front Modular cover complete with all accessories and connections, as per direction of Engineer-in-charge. (Make of wire-Finolex/Anchor/ Havels/V-guard/Polycab/KEI) Group-A
147	Ground Floor
148	Ground-A
149	Ground-B
150	Ground-C
151	FIRST FLOOR
152	Ground-A
153	Ground-B
154	Ground-C
155	Point wiring for 5/6 amp Modular socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with Modular switch, modular Gl box with modular base & cover of suitable size, MS box ISI marked and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as ( Make of wire:- required. Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI)
156	GROUND FLOOR:
157	FIRST FLOOR
158	Supplying, fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) ( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
159	GROUND FLOOR:
160	FIRST FLOOR
161	Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB c of suitable size as required as per direction of Engg-in-Charge All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
162	GROUND FLOOR:
163	FIRST FLOOR
164	Recessed wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire:-Finolex/Anchor/ Polycab/HAVELLS/RR KABLE/KEI) 1 * 1.5 sq. mm
165	GROUND FLOOR:
166	1 x 1.5sq .mm
167	2 x 1.5sq .mm+1x 1.5 sq.mm
168	2 x 2.5sq .mm+1x1.5 sq.mm
169	2 x 4sq .mm+1x 1.5 sq.mm
170	2 x 6 sq .mm+1x 2.5 sq.mm
171	FIRST FLOOR
172	1 x 1.5sq .mm
173	2 x 1.5 sq .mm+1x1.5 sq.mm
174	2 x 2.5sq .mm+1x1.5 sq.mm
175	2 x 4sq .mm+1x1.5 sq.mm
176	2 x 6sq .mm+1x 2.5 sq.mm
177	4 x 10sq .mm+2 x 4 sq.mm
178	Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC/AC single phase 230 volts complete as required.
179	GROUND FLOOR:
180	FIRST FLOOR
181	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-equivalent higher model with 3 star(deco, high speed) rated of Orient/Havells/almonard/Panasonic/Usha or equivalent reputed make & model A catagory ISI marked as approved) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge)
182	GROUND FLOOR:
183	FIRST FLOOR
184	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make-Schneider (Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic
185	GROUND FLOOR:
186	FIRST FLOOR
187	Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required.
188	GROUND FLOOR:
189	FIRST FLOOR
190	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated, die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV, L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years
191	GROUND FLOOR:
192	S/F. of 63A. Cubicle Panel board made out of 16SWG C.R.C.A. Sheet with powder coats & following items. (to be fitted Staircase a) 63A. 4Pole MCCB of Havels/L&T/C&S make:- 01 No. (b) 100A. Cu. Bus Bar complete:- 01 nos. (c) 63A. D.P. MCB of Havels /L&T/C&S make:- 04 nos. (3) Digital Volt meter, Ammeter, RYB indicators, CT Coils, Selector Switch etc.:- 01 Set. (f)) The panel board is to wired with suitable size of Cu. strips which are to be taped with different colours & Cu. F.R. wire of different colours. (g) The panel board is to fitted with MS frame on floor with C.C. work & M.S.nuts & bolts.
193	GROUND FLOOR:
194	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way double door
195	GROUND FLOOR:
196	FIRST FLOOR
197	Supply, Installation, Testing, and Commissioning of Main switches/Change over of following capacity (IS 13940 Part 3/1993) on existing surface / wall mountnting and complete with Rewireable Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.63 Amp TPN
198	FIRST FLOOR
199	SITC of BUSBAR Distribution Board designed with copper Busbar (strip), which is used to distribute the 3 phase incoming supply with multiple outgoing connections of 3 phase or 1 phase. Features:-Ample Space for Wiring. 100% Neutral Rating. Step Wise Busbar Mounting, High Insulated DMC Material Support for Busbar Assembly, Tin Plated ETP Copper Busbar Standard:IS 61439-6, Color:RAL 7035 Semi Glossy, No. Of Ways:4 Way Rated Voltage:-415 VAC, Armbient Temperature:-40 deg C etc.63 Amp TPN
200	FIRST FLOOR
201	Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30mA in the existing MCB DB complete with connections, testing commissioning etc. as required. (FOR FIRST FLOOR) 40A DP
202	GROUND FLOOR:
203	FIRST FLOOR
204	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (FOR FIRST FLOOR) Single pole
205	GROUND FLOOR:
206	FIRST FLOOR
207	SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required Engg-in-Charge (Make direction Panasonic/LT/Havells /Philips/Wipro /Crompton/ Bajaj). The as per of luminaire should be Replacement Warranty will be 2 years
208	GROUND FLOOR:
209	FIRST FLOOR
210	S/F of Street light- 90W,120 lm/w efficacy IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro/Crompton/Bajaj) (5Years Warranty)
211	GROUND FLOOR:
212	FIRST FLOOR
213	Supply, installation, testing and commissioning of 2300 VA pure sine wave inverter with 2 numbers 150Ah tubular batteries, including battery stand, DC cabling, AC input/output wiring, MCB/changeover switch, earthing, battery interlink cables, first-time charging, and all required accessories. All mounting, wiring, terminations, testing under load, and handing over documentation to be completed as per standard electrical practice and as instructed by the Engineer-in-Charge
214	GROUND FLOOR:
215	FIRST FLOOR
216	Supply of A,C with indoor and outdoor unit: 1.5 TR high wall 5 star inverter type split A.C machine (BTU/Hr-18000) with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor (Make:O-General/Diakin/Mitsubishi/Hitachi/Carrier)
217	GROUND FLOOR:
218	FIRST FLOOR
219	Supply, installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation complete with fitting of bends and other nesessary material to complete the job.1 TR to 3 TR high wall split A.C
220	GROUND FLOOR:
221	FIRST FLOOR
222	FRAME WORK:- Supply, installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.
223	GROUND FLOOR:
224	FIRST FLOOR
225	S/F. of 4KVA Stabilizer of V-guard/Autotake/Elpower make.
226	GROUND FLOOR:
227	FIRST FLOOR
228	DRAIN PIPING:-Supply, installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job. 25mm nom. Dia pipe
229	GROUND FLOOR:
230	FIRST FLOOR
231	Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with CI/MS cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required.
232	GROUND FLOOR:
233	Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with CI/MS cover plate having locking arrangment and watering pipe etc with charcoal and salt as required.
234	GROUND FLOOR:
235	FIRST FLOOR
236	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with GI, nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
237	FIRST FLOOR
238	Sub-Total
239	INTERNAL & EXTERNAL PH WORKS
240	Supplying all materials, tabour. T&P and Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 100 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
241	In Ground Floor=20mm dia C-PVC Pipes
242	25mm dia C-PVC Pipes
243	25mm dia UPVC ASTM-D Pipes
244	32mm dia UPVC ASTM-D Pipes
245	In First Floor
246	20mm dia CPVC Pipes
247	25mm dia CPVC Pipes
248	25 mm dia UPVC ASTM-D Pipes
249	32 mm dia UPVC ASTM-D Pipes
250	In second floor
251	32mm dia UPVC ASTM-D Pipes
252	40mm dia UPVC ASTM-D Pipes
253	Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1.4) for taking Gl pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
254	In ground floor- 250mm thick wall
255	In First Floor
256	Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
257	250mm to 375mm thick wall.
258	Supplying all materials, labour, T&P and cutting grooves in pucca floors and wall for taking GI/ PVC pipes and making good the damages as per the direction of th Engineer in charge.
259	In ground floor
260	In First Floor
261	Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of th following nominal bore with supply of all jointing materials complete as per specificatie and direction of the Engineer in charge
262	15mm dia CP Bib cock (Plaza/Aquatic/Amber)
263	15mm dia long body Bib Cock cock (Jaquar)-CON-CHR-107KN
264	15mm dia CP Pillar cock (Jaquar) CON-CHR-021KN
265	15mm dia CP angle stop cock (FLR-ACR-5053N)
266	20mm dia CP consealed stop cock(Jaquar)-CON-CHR-087KN
267	15mm dia Two way Bib Cock (Jaquar)-CON-CHR-041KN
268	HAND SHOWER (HEALTH FAUCET) WITH 1 METER (Jaquar- ALD-CHR-565
269	Revolving Shower with arm Jauar Cat NO--OHS-CHR-1709
270	25mm CPVC ball valve
271	32mm dia CPVC Ball valve(Supreme/Ashirvad)
272	40mm dia CPVC Ball valve(Supreme/Ashirvad)
273	15mm dia CP Flange
274	15mm dia CP Extension piece
275	125mm dia CP Gratting
276	Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral \\"S' or 'P' trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge
277	EW.C 'P' trap plain (Parryware/Hindware/Neycer)
278	One piece commod(Hindware) ELEMENT Cat No.92084
279	Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistem and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge
280	10 Liters capacity PVC cistern with 32mm dia flush bend (Parryware/Hindware/Neycer)
281	Supplying all materials, labour, T&P and fixing of wash hand basins with pedestal complete recessed at the back for the reception of pipes and fittings with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
282	Half pedestal Basin(Hindware)No.91049+91115
283	Under counter basin (Hindware) 10095+ALD-CHR-709+ALD-CHR-803AB+KUB-CHR-35001F
284	3 Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement ete all complete as per specification and direction of the Engineer in charge.
285	half Stall urinal (Hindware make-60002)
286	15mm dia urinal spreader
287	32mm dia C.P. dome waste
288	Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class KB brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick. R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete (1:2.4) using 12mm size hig chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge(3 layer)
289	Fixing 2000Ltr Roto-moulded water storage tanks-On the roof of second floor
290	Supplying materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
291	110mm dia U-PVC SWR pipe (Supreem/Ashirvad)
292	110mm dia U-PVC Door Tee
293	110mm dia U-PVC Plain Tee
294	110mm dia U-PVC Plain Bend
295	110mm dia U-PVC Door Bend
296	110mm dia U-PVC Plain Shoe Bend
297	110mm dia U-PVCoffset without ear
298	110mm dia U-PVC \\"P\\" trap
299	110mm dia U-PVC Cowl
300	PVC clamp suitable for 50mm to 110mm dia pipe
301	50mm dia UPVC class-IV pipes
302	75mm dia U-PVC SWR pipe (Supreme/ Ashirvad/ Oriplast)
303	75mm dia U-PVC Plain Tee
304	75mm U-PVC plain bend
305	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
306	Design mirror (Parryware)
307	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge
308	600mmx125mm Glass Shelf with CP/NP guard rail
309	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
310	25mmx600mm long CP towel rail (Jaquar make-AHS-CHR-1501)
311	CP Towel Ring (Jaquar) ACN-CHR-1121N
312	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
313	CP Soap Holder
314	Factory made Solid WPC door frame of size 95mmx55mm fabricated The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
315	8 x 4.95 m
316	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompactes with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mir shall be used as core material for fitting the metal fittings such as tower holts. aldrops, handles etc shall be provided. A structural adhesive compatible woth (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant 1.S.specification. The finish of door shutter will be plain colour white Ivory Beige/ Light grey/ Mahogany Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
317	8 x 0.70 x 2.05
318	Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mox using 12mm size hg chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (16) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
319	Gully trap chamber of size 250mmx250mm with R.C.C cover slab
320	Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class KB brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size hig chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
321	Inside size 760mmx760mmx460mm
322	R.C.P.C Cover(18\\" round man hole cover)
323	Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete (1:3:6) using 40mm size hard granite metal on bed, Ist class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12munthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size hig chips with RCC man hole cover, earthwork, in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
324	Inside size 910mm×910mm×910mm
325	R.C.P.C Cover(24\\" round man hole cover)
326	Supplying all materials, labour, T&F and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and Ist class K.B brickwork in cement mortar (1:6) for the remaining height at top, censent concrete (1:4.8) uting 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork is open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
327	Brick masonry soakway pit 1:40m dia x 2.00m deep
328	Supplying al herials, labour, T&F and laying in trenches (to level or slope) unplasticized PVC pipes consuming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) ncluding jointing with supply of approved solvent cement by non-heat application method/as per manufacturer's specification, providing and laying in trench cement concrete (1:4.8) with 10nm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing ete all complete as per PH specification and direction of the Engineer in charge.
329	110mm dia alround concrete
330	160mm dia alround concrete
331	Construction I nos 30 users RCC Septic tank
332	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge
333	1x4.10mx1.93 x1.50m
334	-do-with addl. Depth of 1.5 m
335	1x4.10mx1.93x0.0.60m
336	Supplying all materials, labour T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per direction of the Engineer-in-charge
337	In ground floor
338	Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
339	In ground floor
340	Supplying all materials, labour, T&P and providing cement concrete (1.15:3) with 12mm size hard broken granite chips for R.CC works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
341	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
342	Roof Slab
343	RCC Wall
344	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
345	In ground floor
346	Supplying all materials, labour. T&P and providing 6mm CP (1:4) with cement punning on brick work including watering.curing.cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
347	Supplying all materials, labour, T&P and providing fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
348	110mm dia UPVC Tee
349	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
350	Supplying all materials, labour, T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
351	Filling in foundation and plinth with excavated materials, moorum including watering and ramming etc as directed by the Engineer in charge Please Enable Macros to View BoQ information

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of New Building For Rws&S Sub-Division & Section Office Boipariguda Under Boipariguda Block In The District Of Koraput (Constn/789-Scp/796-Tasp-0182- Construction Of Bldgs)., Koraput-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of New Building For Rws&S Sub-Division & Section Office Boipariguda Under Boipariguda Block In The District Of Koraput (Constn/789-Scp/796-Tasp-0182- Construction Of Bldgs)., Koraput-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us