|
| 1 | [25.1.6]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 6. 100mm dia. [Through Rate] |
| 2 | [25.1.7]Supplying, fixing, testing and commissioning of condenser water pipes / non insulated chilled water pipes of following sizes of MS C class along with necessary clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 7. 80mm dia. [Through Rate] |
| 3 | [25.3.6]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 6. 100mm dia. [Through Rate] |
| 4 | [25.4.4]Supplying, fixing, testing and commissioning o NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end and PN 16 pressure rating as specified. 4. 100mm dia. [Through Rate] |
| 5 | (a) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(b) Horizontal type, multistage, centrifugal, split casing pump of cast body and bromze impeller with stainless steel shaft, mechanical confirming to IS:1520(c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415volts, 3 phase 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class ‘f” insulation confirming to IS:325.(d) M.S fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) Suitable cement concrete foundation duly plastered and with anti-vibration pads.900 lpm at 35 m Head |
| 6 | Providing and fixing of pressure switch in MS pipe line including connection etc. as required:- |
| 7 | Supplying and fixing single headed internal hydrant valve with instantaneous gunmetal/stainless steel coupling of 63mm dia with cast iron wheel ISI marked confirming to IS 5290 (Type-A) with blank Gunmetal/stainless steel cap and chain as required:- Single headed stainless steel |
| 8 | Supplying and fixing of 63mm dia, 15 meter long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire, rivets etc. confirming to IS 636 (type-A) as required: Stainless steel (Grade 304) |
| 9 | Supplying and fixing 63mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzle confirming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:- Stainless steel (Grade 304) |
| 10 | Supplying and fixing first aid Hose Reel with MS construction spray painted in the post office red, confirming to IS 884 complete with the following required. 20mm nominal internal dia water hose thermoplastic (Textile reinforced) type-2 as per IS 12585 20mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipment`s on wall. Connections from riser with 25mm dia stop gun metal valve and M.S pipe and socket. 30 meter |
| 11 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as required for suitable dia MS pipe connection confirming to IS 904 as required:-2 way - 100mm dia M.S pipe |
| 12 | Providing and fixing air vessel made of 250mm dia , 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 13 | Supply of PVC Sheathed armored cable of 1.1 KV copper conductor including aluminum/ steel glands and aluminum thimbles etc. as required: 6 sqmm x 3 core copper conductor. |
| 14 | Supply of indoor type hose lockable cabinet frames fabricated from 40x40x5 angle iron section and 16 gauge MS sheet with full front glass door and locking arrangement, suitable to accommodate landing valves, 15m long hose, first aid hose reel and branch pipe nozzle and fire man axe. The cabinet frame shall be painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade of as required: Approx. 2.1m (High) x 0.9m (Wide) may vary as per site shaft size. The item shall be complete of MS housing with front door. |
| 15 | Supply of double leaf Solid fire rated Steel doors (Make Ozone or equivalent) are made up of 1mm thick G.I. sheet of size 1500mm width and 2400mm in height, BS-476 part 20-22 (1987) IS 3614 Part-2 1992 Door Leaf 45( plus - 1)mm thick, and Door frame of 1.5mm thick G.I. Sheet, with Rockwool (Density 96Kg/m3) as infill material with Polyester Powder coating of 60 to 80 microns (Max lamb of frame will be 100x55mm and frame construction will be single Rebate). All door shall be factory prepared and with necessary reinforcement or Hinges, Lock, Door closer and all the eages interlocked complete with SS 304 Ozone ball bearing Hinges OZ-BHF-2BB 4x3x3 (08Nos.), Door Closer-NSK 680(01No.), Panic Bar (OZ-PB-CRR-F-900MM SILVER) (01No.), Trim Lock(OZ-PB-CRTRIM-F-STD SILVER(01no.), Fire rated clear glass 200x300mm Glass(01No.), Flush Bolt(01No.) and Anchor Fasteners Hilti/Fischer make (08). The work should be completed in all respect up to the entire satisfaction of the Engineer in charge of the work. |
| 16 | Supply of weather proof cabinet of size not less than 0.9 x 06 x 0.5 Mtr made out of M.S sheet not less than 1.5 mm thick having central doors (Two nos.) suitably marked on the outside with letters `FIRE HOSE` including necessary locking arrangement and painting in red colour suitable to accommodate, external yard hydrant valve. 2 Nos 15 Mtr. long Hose pipe, Branch Pipe, nozzle and fire man`s axe.it shall be mounted on boundary wall complete as required. |
| 17 | Supply of Fire Extinguishers ABC dry powder 6 kg capacity. |
| 18 | Portable Fire Extinguishers Supply of Fire Extinguishers Co2 9 Ltr. capacity. |
| 19 | Supply of electronic hooter with high quality speaker made out MS sheet or polymer housing complete as per specification as required |
| 20 | Supply of Manual Call point polymer housing in surface/recess including making connection with wires complete in all respect and as per specification. |
| 21 | Supply of 14 SWG CRCA sheet steel fabricated cubical type Electrical Control Panel for Fire fighting Pump, floor mounting, dust and vermin proof, front operated construction, enclose class-IP 52, powder coated after proper treatment with 7 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min 2.5 sq. mm. FRLS copper wires, ckt labels etc |
| 22 | Supply of standard carbon steel Fire man axe with rubber insulated handled tested to 20000 volts. |
| 23 | Supply of 10 zone main fire alarm panel microcontroller based with its own fire detection zone interface card for initiating and indicating devices and should also be networkable with other panel through RS 485 communication, power supply and battery charger and battery. The panel shall have its own operating system E-PROM for event logging system etc. as required. a) Material construction - CRC sheet with powder coating b) Display Type- Display consisting of 80 CHR backlight alphanumeric with 40 x 2 LCD Display and yellow/ green/ red LED for fault/ isolate/ fire. c) Keypad for operation and monitoring display requirement to display all types alarm condition, short, open condition with address and should also indicate time and date with Public Address System including as per specification as required. |
| 24 | Supply of XLPE armoured copper cable for fire devices (MCP) of size 2 x 1.5 sqmm with PVC conduit pipe. Please Enable Macros to View BoQ information |
