|
| 1 | P and F Chain Swing of size 10` long x 9` high above ground frame is made of M.S. Pipe 2` B class which stay with M.S. pipe 1`B class frame is connected with M.S. rod 25mm dia shaft having fabricated ball bearing no. 3204 shaft, further having 2 Nos. seating belt type seat selded with 8mm thick M.S. complete with painting and fixed in cement concrete block of size 12`x12`x15` into 4 legs in mixing of ratio 1:2:4 complete in all respect of entire satisfaction of engineer-in-charge. |
| 2 | P and F of Bridge Ladder high frame is of MS Pipe 2` x 12 gage. Top hanging side pipe of MS Pipe 2` x 12 gage and its climbing and center handles is of MS Pipe 3/4` x 12 gage with priming and enamel spray painting in multicolour. |
| 3 | P and F of Merry GO round in position MGR platform made of 1.5` MS pipe with floor of 16 gage MS sheet. Handrail 30` height made of MS pipe 1` with priming and enamel spray painting in multicolour. |
| 4 | P and F of setter Sea-Saw frame made of 2` Dia MS Pipe 5` long and 1`6` height of ground level with 4 nos. of sea saw plunks with 1½” MS Pipe 8` long sheet made with 16 guage painted with 1st quality paint and fixing with concrete block 1:2:4 ratio. |
| 5 | P and F of Slide 12` long x 16` wide x 5` high above ground slide is made of S.S. sheet 18 SWG mounted on M.S. angle 40 x 40 x 4 mm slide 2 nos. vertical support of M.S. pipe 1` B class ladder having climbing steps of pipe 1/2 B class complete with painting and to be fixed in CC blocks 12` x 12` x 15` in to 4 legs of mix in ratio 1:2:4. |
| 6 | Providing and fixing Leg Press of size 2250 x 1500 x 1050 mm thick and other posts of 140mm dia and 3.00 mm of MS and fully pipes of 40mm dia 3.00 mm thick made up welding joints of painted with fast drawing Asian paints. All pipe shall be mig welded with scalloped as necessary joints and dressed of edges and burrs. removing sharp points prior to Zinc primer paint be applied at all welding finishing. Bearing used shall be maintenance free, dully oily sealed and self lubricated made by |Company to be reputed Drawing Attached) approved including by Engineer-in charge. (As per unloading and fixing of CC block complete in al respect and transportation loading satisfaction of Engineer-in-Charge. |
| 7 | Providing and fixing of Air Swinger of made with 3mm thick Glavanized pipe having main post 114mm/140mmn, auxiliary 60mm and 48mm and 33, 40x60mm with aluminium LLDEP post caps and plastic parts with stainless steel screws anti-heat, anti-aging, safe, eco-friendly having 200 to 250 Kg user capaçity with powder coated red, brown, blue paint an auxiliary with seed green and steel grey paint (As per Drawing Attached) including transporation loading unloading and fixing of CC block complete in all respect and satisfaction of Engineer-in-charge. |
| 8 | Providing and fixing of Arm Wheel with 3mm thick post 1 14mm/140mm, Galvanized pipe haying main auxiliary 60mm and 48mm and 33, 40x60mm with aluminum LLDEP post caps and plastic parts with stainless steel |screws anti-heat, anti-aging, safe, ecofriendly having 200 to 250 Kg user capacity with powder coated red, brown, blue paint an auxiliary with seed green and steel grey paint (As per Drawing Attached) including transportation loading unloading and fixing of CC block complete in all respect and satisfaction of Engineer-in-Charge. |
| 9 | Providing and fixing of Chest Press of size 2250 x 1500 x 1050 thick and posts of 14 mm dia and 3.00 mm of MS and other fully pipes bf 40mm dia 3.00 mm thick madeup welding joints of painted with fast drawing Asian paints. All pipe shall be mig welded with scailoped as joints necessary and dressed of edges and burrs. removing sharp points prior to Zinc primer paint be applied at all welding free, dully oily finishing. Bearing used shall be maintenance sealed and selflubricated made by Company to be reputed Drawing Attached) approved including by Engineer-in charge. (As per unloading and fixing of CC block complete in all respect and satisfaction of Engineer-in-charge. |
| 10 | Providing and fixing of Chinup and Dipping Bar made with having main Galvanized pipe 3mm thick post 114mm/140mm, auxiliary 60mm and 48mm and 33, 40x60mm with aluminum LLDEP post caps and plastic parts with stainless steel screws anti-heat, anti-aging, safe, ecofriendly having 200 to 250 Kg user capacity with powder! coated red, brown, blue paint an auxiliary with seed green and steel grey paint (As per Drawing Attached) including transportation loading unloading and fixing of cc block complete in all respect and satisfaction of Engineer-in-charge. |
| 11 | Providing and fixing of Double Cross Trainer made with 3mm thick Galvanized pipe having main post 114mm/140mm, auxiliary 60mm and 48mm and 33, 40x60mm with aluminum LLDEP post caps and plastic parts with stainless steel Screws anti-heat, anti-aging, safe, eco-friendly having 200 to 250 Kg user capacity with powder coated red, brown, |blue paint an auxiliary with seed green and steel grey paint (As per Drawing Attached) including transportation loading unloading and fixing of CC block complete in all respect and satisfaction of Engineer-in-Charge. |
| 12 | Providing and fixing of Élliptical Exercise made with 3mm thick Galvanized pipe having main post 114mm/140mm,) auxiliary 60mm and 48mm and 33, 40x60mm with aluminum |LLDEP post caps and plastic parts with stainless steel screws anti-heat, anti-aging, safe, eco-friendly having 200 to 250 Kg user capacity with powder coated red, brown, blue paint an auxiliary with seed green and steel grey paint (As per Drawing Attached) including transportation loading unloading and fixing of CC block complete in all respect and satisfaction of Engineer-in-Charge. |
| 13 | Providing and fixing of Horse Rider Station of made with 3mm thick Glavanized pipe having main with 114mm/140mm, auxiliary 60mm and 48mm 8and 33, 40x60mm aluminium LLDEP post caps and plastic parts with stainless friendly steel screws anti-heat, anti-aging, safe, eco coated having 200 to 250 Kg user capacity with powder and steel red, brown, blue paint an auxiliary with seed green grey paint (Ás per Drawing Attached) including transportation complete loading unloading and fixing of CC block in all respect and satisfaction of Engineer-in-charge. |
| 14 | Providing and fixing of Pull Chair made with 3mm thick post 114mm/14Omm, Galvanized pipe having main auxiliary 60mm and 48mm and 33, 40x60mm with aluminum |LLDEP post caps and plastic parts with stainless steel |screws anti-heat, anti-aging, safe, eco-friendly having 200 to 250 Kg user capacity with powder coated red, brown, blue paint an ausiliary with seed green and steel grey paint (As per Drawing Attached) including transporation loading unloading and fixing of CC block complete in all respect and satisfaction of Engineer-in-Charge. |
| 15 | Providing and fixing of Triple Seated Twister made with thick Galvanized pipe having main post 114mm/140mm, auxiliary 60mm 8and 48mm and 33, 40x60mm with aluminum LLDEP post caps and plastic parts with stainless steel screws anti-heat, anti-aging, safe, ecofriendly having 200 to 250 Kg user capacity with powder coated red, brown, blue paint an auxiliary with seed green and steel grey paint (As per Drawing Attached) including transportation loading-unloading and fixing of CC block |complete in all respect and satisfaction of Engineer-in Charge. Please Enable Macros to View BoQ information |
