|
| 1 | Repairs to plaster of thickness 12 mm (Twelev millimetres) to 20 mm (Twenty millimetres) in patches of area 2.5 sq. (Two point five square) meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete With cement mortar 1:4 (One cement : Four fine sand) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 2 | Providing and fixing anodised / colour coated aluminium work for door (External door NO 14081 Size 127x 44.45x3.19mm (One hundred twenty seven into forty four into three point ninteen millimetres) , window, ventilators and partitions frame with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In- Charge. For doors windows, ventilatiors and glazed partitions frames.For shutters of doors windows &ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittingswhere ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 3 | Providing and fixing anodised / colour coated aluminium work for door , window, ventilators and partitions shutter with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows, ventilatiors and glazed partitions frames.For shutters of doors windows &ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm (Five point five millimetre) thickness (weight not less than 12.50 kg/sqm (Twelev point fifty kilograms/squre metres) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 5 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg (One hundred twenty five kilograms)for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. with stainless steel cover plate minimum 1.25 mm thickness complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 6 | Providing and fixing 4mm (Four hundred millimtres) thick E Board (Embassed board) Ceiling of approved quality of ISI Mark including fixing to base frames with screws and clamps etc complete (frame work for base & cover fillets to be measured and paid for separately) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 7 | Providing and fixing 19mm (Nineteen millimetres) thick Commercial Board water proof shutters for up boards including fixing with nickel plated piano hinges with screws etc.) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 8 | Providing and fixing 6mm (Six millimetre) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 9 | Providing 10 mm (Ten millimetres) thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m (Five metre) above floor level, over first class kail wood strips 25x6 mm (Twenty five into six millimetres) with 10 mm (Ten millimetres) gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): Flat surfaces complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 10 | Providing and fixing Stainless steel Road for pelmet grade 304, curtain rod 25 mm (Twenty five millimetres) dia 1.20mm (One point twenty millimetres) thick complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 11 | Providing 40x3mm (Forty into three millimeters) flat iron hold fast 40cm (Forty centimeters) long including fixing to frame with 10mm (Ten millimeters) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30x10x15cm. 1:3:6 (One cement : Three sand: Six graded stone aggregate 20mm (Twenty millimtres) nominal size) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.incidentals. |
| 12 | Providing and fixing anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 13 | 300x16mm size (Three hundred into sixteen milimetres) nominal size |
| 14 | 250x16mm(Two hundred fifty into sixteen milimetres) nominal size |
| 15 | Providing and fixing anodized aluminium towe bolt (Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etc. complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 16 | 250x10mm (Two hundred fifty into ten milimetres)nominal size |
| 17 | 200x10mm (Two hundred into ten milimetres)nominal size |
| 18 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 19 | 125mm (One hundred twenty five milimetres) nominal size |
| 20 | 100mm (One hundred milimetres) nominal size |
| 21 | Providing and fixing 100mm (One hundred millimetres) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 22 | Providing and fixing 12mm (Twelve millimetres) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 23 | Providing and fixing 0.60mm (Zero point sixty millimettres) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 24 | Providing and fixing ridges or hips 60cm (Sixty centimetrtes) overall with 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 25 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetres) gap for thermal expansion, (i) Single socketed pipes complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 26 | 100mm (One hundred millimetres) dia pipes |
| 27 | 150mm (One hundred fifty millimetres) dia pipes |
| 28 | Providing and fixing polycarbonated tranparent sheet 1.20mm (One point twenty milllimetres) thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 29 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 30 | Providing and applying white cement based putty of average thickness 1 mm (One millimetres) , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 31 | Wall painting (Two coat ) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly bushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for marking the surface complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 32 | Providing 5.5 mm (Five point five millimetres) thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 33 | Kota stone slab flooring 25mm (Twenty five millimetre) thick over 20 mm (Twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (One cement : Four coarse sand) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 34 | Providing and fixing Gl Clip in Metal Ceiling System of 600x600mm (Six hundred into Six hundred millimetres) module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm (Zero point five millimetres) thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm (Three hundred millimetres) centre to centre, suspending the main C carrier of size 10x38x10 mm made (Ten into thirty eight into ten millimetres) of G.I steel 0.7 mm (Zero point seven millimetres) thick from the soffit with help of soffit cleat 37x27x25x1.6 mm (Thirty seven into twenty seven into twenty five into one point six millimetres), rawl plugs of size 38x12 mm (Thirty eight into twelve millimetres) and C carrier suspension clip and main carrier bracket at 1000 mm (One thousand millimetres centre to centre inverted triangle shaped Spring Tee having height of 24 mm (twenty four millimetres) and width of 34 mm (thirty four millimetres) made of Gl steel 0.45 mm (zero point forty five) thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm 9Sxi hundred millimetres) centres with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (One hundred) (both side inclusive), fixing with clip in tiles into spring T with GI Metal Ceiling Clip complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 35 | Providing hydraulic door closer single acting ISI make complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 36 | Providing and fixing door hinges complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 37 | Providing to wall ceiling and floor galvanized mild steel tubes (heavy grade) tube fitting and clamp including making good the wall, ceiling and floor complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 38 | 15mm (Fifteen millimetres) nominal bore |
| 39 | 20mm (Twenty millimetres), nominal bore |
| 40 | Providing and fixing vitreous china wash down water closet (European type W.C. Pan) Hindware, Cera, Parry ware or its equivalent make including jet pressure with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement: one sand) seat and cover to be measured and paid for separately) Angle Indian Universal closet complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 41 | Providing and fixing 100mm (One hundred millimetres) size ‘P’ or ‘S’ trap for water closet (squatting pan) Hindware, Cera, Parry ware or its equivalent including jointing the trap with the pan and soil pipe in cement mortar 1:1 (One cement : One sand ) Sand cast iron complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 42 | Providing and fixing 580x440 mm (Five hundred eighty into four hundred forty millimetre) Hindware, Cera, Parry ware or its equivalent white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 43 | Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan Hindware, Cera, Parry ware or its equivalent complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 44 | Providing solid plastic seat cover with lid for pedestal type W.C. pan Hindware, Cera, Parry ware or its equivalent complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 45 | Providing and fixing white vitreous china wash basin Hindware, Cera, Parry ware or its equivalent including making all connections but excluding the cost of fittings Flat back wash basin of size 450x300 mm (Four hundred fifty into three hundred millimetres) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 46 | Providing and fixing 550x400mm (Five thousand fifty into four hundred millimetre) size Hindware, Cera, Parry ware or its equivalent vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and marking good the same but excluding fittings complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 47 | Providing and fixing Size 600x450 mm (Six hundred into four hundred fity millimetre) size Hindware, Cera, Parry ware or its equivalent vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and marking good the same but excluding fittings complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 48 | Providing and fixing Size 600x450x200 mm (Six hundred into four hundred fifty into two hundred millimetres) laboratory sink ISI Make with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fitting complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 49 | Providing and fixing 450x300x150 mm (Four hundred fifty into three hundred into one hundred fifty millimetres) laboratory sink ISI make with C.I or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fitting complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 50 | Providing and fixing 32mm (Thirty two millimetres) dia C.P. Brass chain 50cm (Fifty centimettres) long and rubber plug ISI make of following sizes for sink or wash basin complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 51 | Providing 32mm (Thirty two millimetres) dia rubber plug for sink/wash basin Hindware, Cera, Parry ware or its equivalent complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 52 | Providing 32mm (Thirty two millimetres) dia C.P. brass waste pipe for wash basin or sink ISI make complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 53 | Providing 32mm (Thirty two millimetres) dia M.I, Union for wash basin or sink ISI make complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 54 | Providing 100mm (One hundred millimetres) sand cast iron grating for gully, floor or Nahni trap ISI make complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 55 | Providing 600x450mm (Six hundred into Four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (Six millimetres) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 56 | Providing 600x20mm (Six hundred into twenty millimetre) nominal size C.P. Brass Towel rail Hindware, Cera, Parry ware or its equivalent complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws: complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 57 | Providing and fixing 600x120mm (Six hundred into one hundred twenty millimetres) glass shelf Hindware, Cera, Parry ware or its equivalent C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 58 | Providing chromium plated brass soap dish with C.P brass brackets fixed to wooden cleats with CP brass screws Hindware, Cera, Parry ware or its equivalent complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 59 | Providing 15mm (Fifteen milimetres) diameters long nose brass bib tap (Superior or heavy type) Cera, Jaquuar and Hindware complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 60 | Providing 15mm (Fifteen milimetres) dia long body brass bib tap (Superior or heavy type) Cera, Jaquuar and Hindware complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 61 | Providing C.P. brass angle valve 15mm (Fifteen milimetres) without nuts and pipes Hindware, Cera, Parry ware or its equivalent complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 62 | Providing Mixer for kitchen sink with casted swinging spout at top complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 63 | Providing bath shower Hindware, Cera, Parry ware or its equivalent complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 64 | Providing 15mm (Fifteen milimetres) nominal bore PVC connection with brass unions 300/450mm (Three hundred/four hundred fifty millimetres) length: ISI make complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 65 | Providing brass full way valve with wheel Hindware, Cera, Parry ware or its equivalent complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 66 | 15mm (Fifty millimeters) nominal bore |
| 67 | 20mm (Twenty millimetres) nominal bore. |
| 68 | Providing and fixing brass ball valve (horizontal plunger type):- High pressure with polythene plastic floats complete Hindware, Cera, Parry ware or its equivalent as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 69 | 15mm (Fifty millimeters) nominal bore |
| 70 | 20mm (Twenty. millimetres) nominal bore |
| 71 | Providing and fixing 610x460 mm (Six hundred ten into four hundred sixty millimetres) with bowl depth 200 mm (Two hundred millimetres) stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 72 | Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10 litres (Ten liters) capacity (full flush) ISI make European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, siphon, 15mm (Fifteen millimetres) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and overflow pipe, 40mm (Forty millimetres) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 73 | Providing Chromium plated jet spray of approved quality and colour with one metre tube complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 74 | Annual Repair and complete maintenance of all civil work the hospital including attending water supply storage tanks, checking and repair of bib tab, stop cock, pillar cock, mixtures, water pipes, cistern, wash basin, and flushing cistern etc; Checking and repair of internal sewerage, repair of doors, windows, ceiling, dismantling of floors, maintenance, checking and repair of all pipes with leakage etc; including all type of manpower involved but excluding material required complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 75 | Providing and fixing Chlorinated (CPVC) pipes ISI make having thermal stability for hot and cold water supply inluding all CPVC plain & brass threaded fittings including the pipe with clamps at 1.00 mtr. (One metre) spacing. This includes jointing of pipes and fitting with one step CPVC solvets cement and testing of joints complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 76 | 15mm (Fifteen millimetre) |
| 77 | 20mm (Fifteen millimetre) |
| 78 | 25mm (Twwenty Five millimetre) |
| 79 | Cleaning of Chocked Chambers complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
