Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size not exc. 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size exc. 1.5 Sqm but not exc. 4.00 Sqm each complete all as specified and directed. |
| 3 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately).(Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured for payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) |
| 4 | Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.90 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass/ wire mess shall be paid separately)Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured for payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 5 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.90 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass/ wire mess shall be paid separately). (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured for payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) |
| 6 | S & F 5.5 mm thick sheet glass , ordinary quality and glazed in square not exceeding 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 7 | S & F 5.5 mm thick sheet glass , ordinary quality and glazed in square exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 8 | S & F 3 mm thick figured glass , pin head type and glazed in square not exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 9 | S&F stainless steel wire cloth power coating 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 10 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 11 | Description all as per above Item No 10.00 but double rebare Frames/ Chowkhat of size 65 x 150 mm etc completed all as specified and directed |
| 12 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded WPC flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 13 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type fly proof wire mess door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge.(Note: stainless steel butt hinges, necessary S.S screws ad wire mess shall be paid separately) |
| 14 | S & F 100 mm size Hinge stainless steel 10x6x0.25cm (100 X 60 X 2.5 mm) complete all as specified and as directed. (Make : - Godrej product Code SS Hinge - 4365 and make as per approved make list and as approved by GE). |
| 15 | S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed all as spd and directed. |
| 16 | S&F extruded aluminium handles, 150mm size cast type anodised complete all as specified and directed |
| 17 | S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed. |
| 18 | S & F 200 mm Mortise Door Lock Handle Set, (01 lock with handle and keysetc) Suitable for Left & Right Handed Doors (Satin Steel Finish) complete all as specified and as directed. (Make : - Godrej COMBIPACK WITH 6 LEVER MORTISE LOCK product Code ELC 08 Satin - 6068 and make as per approved make list and as approved by GE). |
| 19 | S & F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all specified and directed. |
| 20 | S&F 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed. |
| 21 | M&L for dismantling of old board of cupboard , kitchen cabinate etc as in any position and any type etc complete all as specified and directed |
| 22 | S&F factory shutter made 18mm thick 100% Solid WPC (Wood polymer Composite) plain board of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade), Clacium carbonate and natural fibers (Wood powders/ rice husk/ wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (Inner) with density not less than 650kg/cbm certified company, having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), Minimum compressive strength of 50/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A Category with property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hings of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engr-in-charge, Material test certificates and autherntication should be compulsory provided by the manufacturing company. For WC/ Bathroom/ Toilet/ Kitchen & Cabinets. |
| 23 | S&F factory shutter made 18mm thick 100% Solid WPC (Wood polymer Composite) Laminated board of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade), Clacium carbonate and natural fibers (Wood powders/ rice husk/ wheat husk) and non toxic additives made from Extrusion process WPC foam sheet. Single extruded (Inner) with having minimum density not less than 650kg/cbm having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), Minimum compressive of 50/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A Category with property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hings of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engr-in-charge, Material test certificates and autherntication should be compulsory provided by the manufacturing company. For WC/ Bathroom/ Toilet/ Kitchen & Cabinets. |
| 24 | S & F 150 mm size designer door handel stainless steel cromimum plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc complete all as specified and as directed. (Make : - Godrej and make as per approved make list and as approved by GE). |
| 25 | S & F for Hettich soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed (Make : - Godrej/Hettich and make as per approved make list and as approved by GE). |
| 26 | S&F 18 inch (45 CM) soft closure hinges telescopic Drawer Channel channels, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed (Make : - Godrej/Hettich and make as per approved make list and as approved by GE). |
| 27 | S&F 20 inch ( 50 CM) soft closure hinges telescopic Drawer Channel channels, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed (Make : - Godrej/Hettich and make as per approved make list and as approved by GE). |
| 28 | S&F Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mmdia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 6121 or equivalent in IPSA/Hettich as approved by Engr-in-Charge). |
| 29 | Stainless steel thali basket of size 370mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6136 or equivalent in IPSA/ Hettich as approved by Engr-in-Charge). |
| 30 | S&F Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6132, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge). |
| 31 | S&F Stainless steel two shelf pullout basket of size 150 mm x 450mm x 430 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 2260, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge). |
| 32 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40 mm waste fittings, brass chromium plated with long screwed shanks and fly nuts flange end bedded in red lead cementand other end fixed etc all as completed and specified. |
| 33 | S & F in repair Stainless steel sink, 1.00 mm thick for kitchen with plug, washers, waste pipe, including cantilever cast iron brackets, connecting union etc overall size 495 mmx420 mm with bowl size 410mm x330 mmx 160 mm complete all as specified and directed. |
| 34 | S & F in reapir stainless steel kitchen plate rack minimum size 900 mm x 750 mm x 200 mm including fixing on wallmounted etc |
| 35 | S & F Mild Steel framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified. |
| 36 | S&F flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed. |
| 37 | S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats |
| 38 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 39 | S & F Factory made solid panel PVC door/cup board shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge.. |
| 40 | S&F mild steel butt hinges medium weight cold rolled of size 100 mm and fixed to shutters. complete all as specified and as directed. |
| 41 | S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed |
| 42 | S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 43 | S & F 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed |
| 44 | S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed. |
| 45 | S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 46 | S & F 4 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 47 | S & F anodised aluminium , poweder coiating of any colour, Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) including track size not less than 90 mm x 20 mm x 1.8 mm inbuilt roller track with rubber gasket and shutter stiles rail of aluminum section of size 40mmx 18 mmx1.5mm thick with suitable locking arrangement fixing glass pans in frame shutter covered with rubber packing, complete each shutters of window shall be provided with 2 Nos 100 mm aluminium handle etc all as complete all as specified and as directed. |
| 48 | S & F anodised aluminium window and ventilator shutters, with Powder Coating (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 No.) complete all as specified |
| 49 | S & F anodised aluminium frame for doors, windows, ventilators with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 50 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. etc complete all as directed. |
| 51 | S & F in repairs stainless steel Curtain Rod 25 mm dia with holders including end to end brakets fixed to wall etc complete all as specified and as directed. |
| 52 | S & F Aluminium alloy powder coated / stainless steel fancy type bracket with new screws for curtain rod complete all as specified and directed. |
| 53 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off from premises complete all as specified and directed |
| 54 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc |
| 55 | M&L for demolition to Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed |
| 56 | Demolition of cement concrete any description and any position not otherwise specifically provided for complete all as specified and as directed. |
| 57 | M&L for 15mm thick plastering/rendering on brick work on concrete surfaces in cement mortar (1:3) mixed with liquid water proofing compound as per manufaturer's instructions finishing surfaces even and smooth without using extra cement complete all as specified and directed. (liquid water proofing compound shall be measured and paid sepretaely). |
| 58 | Supply only liquid water proofing compound complete all as specified & directed. |
| 59 | M&L sunkern floor treatment including prepration of concrete/plaster surfaces .and applying the following treatment complete all as specified . (a) Applying 1st course of bitumenous primer @ 0.4 kg/sqm conforming to IS-3384 over roof concrete surface .(b )Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180° C and applied @ 1.2 kg/sqm.(c ) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 150 mm on the width side overlap and 100 mm on long side overlap as per manufacturer instructions . The membrane has to be laid with LPG torch and overlap sealed and finished neat (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 kg/sqm . |
| 60 | M L for PCC 1:5:10 type E-2 (40 mm graded Aggregate) as in sunkern floor , fdn, mass concrete etc allas specified and directed |
| 61 | M & L for 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc all as specified and directed |
| 62 | M&L Virified Ceramic tiles light shade double charged 10 mm thick (square/ rectangular) polished ( Design/pattern in flooring as approved by GE) , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed |
| 63 | M&L Virified Ceramic tiles light shade double charged 10 mm thick (square/ rectangular) polished ( Design/pattern in flooring as approved by GE), area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, such as skirting, dados, verticale surface etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 10 mm thick rendering in CM 1:3, complete all as specified and directed |
| 64 | M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, laid, over and incl 15 mm thick avg screed bed in CM 1:6, complete all as specified and dirtected by Engr-in-Charge . |
| 65 | M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, over and incl 10 mm thick screed bed in CM 1:3, complete all as specified and directed. |
| 66 | M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps with double edge, jambs, pillars, window cills, platforms and like over and incl 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab, notching, moulding and polishing complete all as specified and as directed . |
| 67 | Taking up or down 15 mm bore steel tubing and connections from any position etc including cleaning for refixing or removal to store complete all as specified. |
| 68 | S&F 15mm bore medium grade steel water tubing galvanised with all fittings such as tee, elbow, socket, union etc. and fixed complete to walls and ceiling or laid in floors/roofs, and including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girthetc complete all as specified and directed. |
| 69 | S & F in repair of 25 mm bore dia of Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe, complete all as specified and as directed. |
| 70 | S & F in repair of 40 mm bore dia of Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe, complete all as specified and as directed. |
| 71 | S&F in repair 15mm angle cock/ stop valves, with wall flange , fancy type chromium plated cast copper alloy, screwed down, high pressure, with fancy handle, screwed ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. |
| 72 | S & F in repairs 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed. |
| 73 | S & F in repair 15 mm bore two way bib cock with wall flange cast copper alloy , fancy type , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaqaur Cat Part No. ARI-39041 and equivalent in Jaquar, Hindware and Kohilar as approved by GE |
| 74 | S&F in repairs15 MM CP brass WHB Mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and directed. |
| 75 | S&F in repairs15 MM CP brass sink Mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and directed. |
| 76 | S&F brass chromium plated wall mixture 2 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR and as approved by GE |
| 77 | S & F Overhead Shower 120X120mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body in Chrome finish) with Rubit Cleaning Systemwith 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. Make : Jaquar OHS-CHR-1667and as approved by GE |
| 78 | S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 and equivalent in jaquar / Hindware/Parryware or equivalent make as per approved make list).) |
| 79 | S & F in repair full pedestal pattern wash hand basin with pedestal , size of basin 58 × 43.5 × 82.5 cm as approved by GE including brakets , chromium plated brass waste coupling etc complete all as specified and as directed. Make : HindwareTango Full Pedestal Wash Basin Cat part No. 10086 and equivalent in jaquar /Parryware or equivalent make as per approved make list) |
| 80 | S&F Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and dirtected by Engr-in-Charge . |
| 81 | S & F in repairs Vitreous china Rimless Bowl With Cistern For Extended Wall Hung WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 375x630x750 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. Continental Series CNS-WHT-363SPPZ and equivalent in makes as per approved make list and as approved by GE). |
| 82 | S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge . |
| 83 | S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket including flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern etc complete all as specified and directed |
| 84 | S & F in repairs 15 mm bore bib tap chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed. |
| 85 | S&F in repair 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specifed and directed. |
| 86 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm. |
| 87 | S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm. |
| 88 | S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. |
| 89 | S & F 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM), complete all as specified and as directed. |
| 90 | S & F in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass Min size 300 mm x 300 mm with chromium plated bracket guard and railing complete all as specified and as directed. |
| 91 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45 cm long complete all as specified and as directed. |
| 92 | S & F in repair Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. Make : Jaquar Cat part No. ACN-CHR-1121BN and equivalent in jaquar / Hindware/Parryware or equivalent make as per approved make list).) |
| 93 | S & F in repair Toilet paper Roll Holder with Stainless Steel Flap, and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. Make : Jaquar Cat part No. ACN-CHR-1153Sand equivalent in jaquar / Hindware/ Parryware or equivalent make as per approved make list).) |
| 94 | S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. |
| 95 | S & F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 96 | S & F in repair 100 mm dia PVC (SWR) floor trap, plain with Stainless steel grating / hole grating for waste pipe fixing and including jointing with solvent cement etc complete all as specifed and directed. |
| 97 | S & F in repair 100 mm dia PVC (SWR) multi floor trap, plain with Stainless steel grating including jointing with solvent cement etc complete all as specifed and directed. |
| 98 | Dismantling of cast iron or PVC Pipe of any dia complete all as specified and directed |
| 99 | S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor completed all as specified and directed (Note : Pipe work executed in saft area upto the 07 story building also ) |
| 100 | S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls completed all as specified and directed (Note : Pipe work executed in saft area upto the 07 story building also) |
| 101 | S & F in repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed |
| 102 | S & F in repair 110 mm PVC (SWR) bends etc completed all as specified and directed |
| 103 | S & F in repair 110 mm PVC (SWR) junction single, (Single T) equal or unequal with acess door etc completed all as specified and directed |
| 104 | S & F in reapir 110 mm dia PVC cowls |
| 105 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement or cement lime morta including all quoins, arches,pillars, etc, |
| 106 | M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and directed |
| 107 | M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, in half brick thick complete all as specified and directed by Engr-in-Charge. |
| 108 | Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note :- This Item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.) |
| 109 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed . |
| 110 | M & L Rendering 10 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed by Engr -in Charge. |
| 111 | M&L for followings :-(i) Removing plaster & finishes from all exposed / damaged portion of facia, roof projection, parapet, chajjas , over hanging slabs, columns, slabs & beams(ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible)(iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed and cleaning all around.(iv) Cleaning exposed concrete substrate by using water jet.(v) Removing visible rust along the length of reinforcement using hand tools as approved.(vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed.Note :- This item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.) |
| 112 | M&L for providing PMM (Polymer modified cementitious mortar) :-(i) Dry sub strate surface and free of debris & dust(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine or suitable brushes & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of atleast strength equivalent of M-40 concrete of average 25 mm thickness.Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.Note :- This Item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.) |
| 113 | Demolition of Reinforced cement concrete roofs, floors (other than ground floors), beams, staircases, landing, chajjas , fins, fascias, louvres, parapets, and railing newels, balustrade, over hanging beam, lintels , design and similar suspended work provided for etc complete. Note :- This Item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.) |
| 114 | M & L for RCC 1:1½:3 type A1 (Nominal mix) as in fins, fascias, louvres, parapets, and railing newels, balustrade, etc complete all as specified and directed by Engr-in-Charge. |
| 115 | M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips etc complete all as specified and directed by Engr-in-Charge. |
| 116 | M&L for mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required including cranking bending spirally & binding with and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge. |
| 117 | M & L for form work to sides and soffits of suspended slabs such as roof slabs , landings and similar work not exc 200 mm thick (horizontal or sloopping) for flat rough finished surfaces complete all as specified and directed by Engr -in Charge. |
| 118 | M & L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc for flat rough finished surfaces complete all as specified and directed by Engr -in Charge. |
| 119 | M & L Preparing of New plastered surfaces / concrete surface of ceiling and applying 1st quality acrylic emulsion (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work/ putty surface etc including 1-2 mm thick wall care putty on ceiling surface and including a coat of primer @0.90 Litre/10 sqm using roller brush etc complete all as specified. |
| 120 | M & L for complete removal of existing treatment from internal surfaces of wall/ceilling by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall/ceilling including preparaing the surface even and smooth by sander machine etc and providing two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, applied over a coat of primer and all coat applying with roller brush , complete all as specified and directed by Engineer-in-Charge |
| 121 | M & L Preparing of New plastered surfaces / concrete surface of wall and applying 1st quality acrylic emulsion (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work/ putty surface etc including 1-2 mm thick wall care putty on wall surface and including a coat of primer @0.90 Litre/10 sqm using roller brush etc complete all as specified. |
| 122 | M & L for preparation of old decorated concrete /plastered/un-plastered surfaces of ceiling etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty and applying two coat of white wash complete all as specified and directed. |
| 123 | M & L for preparation of old decorated concrete /plastered/un-plastered surfaces / concrete surface of ceiling etc including cracks/holes in surface filling with white putty and applying two coat of OBD over a coat of chalk whiting etc complete all as specified and directed. |
| 124 | M & L for preparation of new surface including preparing of plastered or unplastered surfaces / concrete surface of wall etc including cracks/holes in surface filling with white putty and applying two coat of OBD over a coat of chalk whiting etc complete all as specified and directed. |
| 125 | M&L two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. |
| 126 | M&L for preparation of new surface decorated brick/concrete plastered or unplastered surfaces/pop surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm of required shade and colour complete, as per manufacturer's specification etc complete all as specified and directed. |
| 127 | Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, light fittings , ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface complete all as directed. |
| 128 | Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm min dia and PVC conduit fittings such as tees, bends, elbow, reducers including cutting & chasing and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular frame and sheet for fixing modular switches/sockets etc for one light point / fans point controlled by one 1-way switch complete all as directed. |
| 129 | Description all as per srl item no. 128.00 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one socket outet point 5 amps on the same board. |
| 130 | Description all as per srl item no. 128.00 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one socket outet point 5 amps on the independent board. |
| 131 | Description all as per srl item no. 128.00 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for 15 Amp power point. |
| 132 | S & F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.Make- Ancher (Roma)/ Legrand (Aeteor)/ Havells (Munaro)/ Goldmedal (Air Nexon). |
| 133 | S & F modular socket two-in-one, 6 Amp universal type, 02 module size complete all as directed. Make- Ancher (Roma)/ Legrand (Aeteor)/ Havells (Munaro)/ Goldmedal (Air Nexon). |
| 134 | S & F modular Socket, 16 Amp, multipurpose shutter type, 02 module size complete all as directed. Make- Ancher (Roma)/ Legrand (Aeteor)/ Havells (Munaro)/ Goldmedal (Air Nexon). |
| 135 | S & F Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed. Make- Ancher (Roma)/ Legrand (Aeteor)/ Havells (Munaro)/ Goldmedal (Air Nexon). |
| 136 | S & F Modular bell push 6 Amp, 1 way, 1 module size complete all as directed. Make- Ancher (Roma)/ Legrand (Aeteor)/ Havells (Munaro)/ Goldmedal (Air Nexon). |
| 137 | Supply and fixing in replacement Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed. |
| 138 | Material and labour submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire in and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed. |
| 139 | Material and labour submain wiring complete with 2 x 16 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm as earth wire in and including PVC conduit of size 25 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed. |
| 140 | Supply and fixing in replacement electric bell of DINGDONG type, 6 Amps, 240 volts, single pole, connections complete all as directed. |
| 141 | Supply and fixing in replacement of wall light fitting for LED lamp, connections complete all as directed. Make- Philips Trendo/ Muziriz or equivalent. |
| 142 | Supply and fixing in replacement surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 10 watt . Slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector all as specified and directed. |
| 143 | Supply and fixing in replacement surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 watt . Slim elegant design and including connected with 3 core 23/0.0076 indulated copper wire from ceiling rose to fitting connector all as specified and directed. |
| 144 | Supply and fixing in replacement of round shape 12 watt 220V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver ,holder LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete |
| 145 | S & F in replacement of Modular Fan regulator step type, 120 watts,complete all as directed. |
| 146 | S&F in replacement of LED bulk head fitting 10 watt made of cast aluminium alloy with opal glass diffuser complete all as specified and directed. |
| 147 | S&F in replacement of 5/6 watt LED bedside light of proper make ,warm white stardard complete all as specified and directed. |
| 148 | Taking down of ventilating fan any type, size complete all as specified. |
| 149 | Supply and fixing in replacement of fresh air fan made of sturdy engineering plastic complete with Louvers shutter voltage 230V,50HZ RPM 1200 copper winding of sweep 250 mm |
| 150 | Taking down ceiling fan/Ex fan, sealing cable end dismantling blades and removing fan and blades to deposited E/M store yard complete all as specified. |
| 151 | S&F in replacement BLDC(Brushless Direct Current ) Ceiling Fan (Energy efficiency ), 1400mm wth IR Remote controlled, operating voltage 220V, mininum air delivery 265 CMM class of insulation 'F' having full copper motor winding & ribbed 3 Nos A/M blades making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed. The fan shall have BEE 5 star rating and service value more than 7.7 Make- Havells/ Atemberg/Crompton and Goldmedal). |
| 152 | S&F in replacement of Exhaust fan 300mm sweep single phase( inbuilt gril), fixed in wall with proper nuts & bolts as reqd and incl connecting provn of PVC insulated and sheathed three core copper conductor flexible cable of size 23/0.0076mm to connect exhaust fan to ceiling rose all as directed. |
| 153 | Taking down of Geyser any type ,size & to deposited E/M store yard complete all as specified. |
| 154 | Supply and fixing in replacement electric water heater storage type steel body with copper inner tank and heating element upto 2 KW CAPACITY 25 LITER bee 5 star rated complete with all accessories such as safety valve thermostat NRV connection etc |
| 155 | Supply and fixing in replacement in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed. |
| 156 | S&F in replacement of MCB DB conforming to IP 43 - IK 09 with double door, SPN 16 way 230 Volt double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. |
| 157 | Supply and fixing in replacement in replacement of MCB B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. |
| 158 | Supply and fixing in replacement in replacement of MCB C curve, 10 kA, 63 Amp, SPN with over load and short circuit protection complete all as directed. |
| 159 | Supply and fixing of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections complete all as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
