Tender For Construction Of Additional School Building At Govt. Senior Secondary School Dehra Distt. Kangra H.Pconstruction Of Civil Work, Including Water Supply & Sanitary Installation, Rain Water Harvesting System, Under Ground Water Tank And Septic, Dehra-Himachal Pradesh

TDR : 55000287

Tender Notice
BOQ

Expired

Dehra , Himachal Pradesh

Tender Brief : Tender For Construction Of Additional School Building At Govt. Senior Secondary School Dehra Distt. Kangra H.Pconstruction Of Civil Work, Including Water Supply & Sanitary Installation, Rain Water Harvesting System, Under Ground Water Tank And Septic

Document Fees
₹ 5000 /-

EMD
₹ 2058300.0 /-

Tender Value
₹ 10.58 Crore /-

Submission Date
19-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as per direction of Engineer-in-Charge and returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all excavated earth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2	Treatment of soil under floors using chemical emulsion @ one litre per hole, 300mm (Three hundred millimetre) apart including drilling 12mm (Twelve millimetre) diameter holes and plugging with cement mortar 1 :2 (One cement isto two Coarse sand) to match the existing floor : With Chlorpyriphos/ Lindane E.C. 20% (Twenty percent) with 1% (One Percent) concentration complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4	Providing and laying in position cement concrete 1:4:8 (One cement isto four coarse sand isto eight graded stone aggregate 20mm (Twenty millimetre) nominal size mechanically mixed and vibrated of specified grade excluding the cost of centering and shuttering, in foundation and plinth including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5	Providing and laying damp proof course 100mm (One hundred millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (Twelve decimal five millimeter) nominal size) and curing complete including cost of form work as required at site or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST or any other taxes imposed by the Government.
6	Providing and laying mechnically mixed and vibrated plain cement concrete 1:2:4 (One cement isto two coarse sand isto four graded stone aggregate 40mm (Forty millimetre nominal size) and curing complete excluding cost of form work in foundation and plinth complete as per architectural drawing including carriage of materials in all leads and lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
7	Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the compressive strength of 30N/mm Square (Thirty newton per square millimetre) for reinforced cement concrete work, using minimum cement content not less that 360 Kg/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix for the work upto plinth level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incitental as per specification approved drawing design and as per directed by the Engineer-in-charge.The rate inclusive Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
8	Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the compressive strength of 30N/mm Square (Thirty newton per square millimetre) for reinforced cement concrete work, using minimum cement content not less that 360 Kg/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix for all work above plinth level to all floor level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incitental as per specification approved drawing design and as per directed by the Engineer-in-charge.The rate inclusive Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
9	Providing tor steel reinforcement of Jindal Panther/ Tata/Sail for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all complete upto all floor level Thermo-Mechanically Treated bars of grade Fe-550D or more etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10	Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
11	Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etcetera complete as per Architectural drawing, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
12	Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
13	Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Lintels, beams, plinth beams, girders, bressumers and cantilevers where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
14	Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etcetra with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Suspended floors, roofs, landings, balconies and access platform, and the like floor, etcetra up to any thickness, up to all floor level as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
15	Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
16	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in all shapes and sizes in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
17	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
18	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (One cement isto Four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
19	Providing and placing in position 2 Nos. (Two numbers) 6mm (Six millimetre) diametre M.S. Sqm bars at every third course of half brick masonry (with F.P.S. bricks). complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
20	Making plinth protection 50mm (Fifty millimetre) thick of cement concrete 1 :3:6 (One cement isto three coarse sand (zone-Ill) derived from natural sources isto six graded stone aggregate 20mm (Twenty millimetre) nominal size derived from natural sources) over 75mm (Seventy five millimetre) thick bed of dry brick ballast 40mm (Forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
21	Brick edging 7cm (Seven centimatre) wide 11.4cm (Eleven point four centimetre) deep to plinth protection with bricks of class designation 7.5 including grouting with cement mortar 1:4 (One cement isto four fine sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
22	Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.
23	Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.
24	12mm (Twelve millimeter) thick cement plaster to ceiling with cement mortar 1:4 (one cement isto four sand), upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.
25	12mm (Twelve millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), upto all floor level with a floating coat of neat cement complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.
26	Providing and laying 300x300mmn Ceramic Antiskid floor tiles of Restile/ Nitco/Kajaria / AGL / Simpolo / Somany / Johnson as per approved shade and design of the office (thickness to be specified by the manufacturer) in flooring with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate of Three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc., complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
27	Providing and fixing Ist quality 300x450mm (Three hundered into four hundered fifty millimetres) Ceramic Antiskid wall tiles conforming to sqm IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm (Twelve millimetre) thick bed of cement Mortar 1:3 (One cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
28	Providing and laying full body matt finish Vitrified tiles in floor of Restile /Johnson/ Rak/Nitco/Kajaria (Etrnity)/ AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
29	Providing and laying Double Charge / Ultra Charge Vitrified tiles of Restile/Johnson/ Nitco/Kajaria / AGL / Simpolo /Somany/Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) size (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
30	Providing and fixing 25mm (Twenty five millimetre) with Second class teak wood, wooden planking, tongued and grooved in flooring, including fixing with iron screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
31	Providing and laying mirror polished 25mm (Twenty five millimetre) thick Kota stone minimum Size 55x55cm / 55x27.5 cm (Fifty five into Fifty five / Fifty five into twenty seven point five centimetre) of uniform colour with 7.5cm (Seven point five centimetre) wide Jaislmer Yellow band of same shade that of flooring of approved shade as per detail slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
32	Providing and laying Kota stone slabs 25mm (Twenty five millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) (average) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
33	Providing Pre finished nosing in treads of steps of Kota stone/ sand stone slab complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
34	Providing and laying 10mm (Ten millimeter) thick acid proof or alkali vesistant tiles of Jonson/Somany/ Kajaria size 300x300mm (Three hundred into three hundred millimeter) in grey/coloured of required shade in skirting flooring on 10mm (Ten millimeter) thick cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles up to all floor level, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
35	Providing and laying 400x400mm (Four hundred into four hundred millimeter) labrador design (rainbow series) tiles of NTC/unistone/Atlantic, of approved shade in flooring/ treads of steps etcetera laid on a bed of 12mm (Twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry as required up to all floor level, complete as per HPPWD specifications and as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
36	Providing and laying 25mm (Twenty five millimetre) thick Chima Pink / Grey Granite stone flooring as per pattern and detail laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:4 (One cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, Semi /Round Nosing, edging and moulding wherever required etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
37	Providing and fixing Tile brick masonry work 5cm (Five millimetre) thick with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in cement mortar 1:3 (One cement isto three coarse sand) in super structure above plinth Including required material, Scaffolding for all height, curing, necessary grooving, grouting /pointing with cement mortar and compound ascomplete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
38	Providing and fixing 18mm (Eighteen millimetre) thick black granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps, pantary / under counter wash basin and water trough, kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
39	Providing edge moulding to 18mm (Eighteen millimetre) thick Granite work marble stone counters, Vanities etcetera, including machine polishing to edge to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
40	Providing wood work 1st class teak wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
41	Providing and fixing Profile B pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm (One point six zero millimetre) thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, (Fifty into twenty five millimetre) or base ties of 1.60mm, (One point sixty millimetre) pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5mm (Two point five millimetre) thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: Fixing with adjustable lugs with split end tail to each jamb complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
42	Providing and fixing Profile C pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm (One point six zero millimetre) thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, (Fifty into twenty five millimetre) or base ties of 1.60mm,(One point sixty millimetre) pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5mm (Two point five millimetre) thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: Fixing with adjustable lugs with split end tail to each jamb complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
43	Providing and fixing factory made UP.V.C. door frame of size 50x47mm (Fifty into forty seven millimetre) with a wall thickness of 5mm (Five millimetre), made out of extruded 5mm (Five millimetre) rigid PVC foam sheet, mitred at corners and joined with 2 (Two) Nos of 150mm (One hundred fifty millimetre) long brackets of 15x15mm (Fifteen into fifteen millimetre) M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm (Nineteen into nineteen millimetre) M.S. square tube of 19 (Nineteen) gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm (Sixty five oblic one hundred millimetre) size, complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
44	Providing and fixing Second class teak wood 40mm (Forty millimetre) thick panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
45	Providing and fixing 40mm (Forty millimetre) thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm (Twenty five millimetre to 40mm (Forty millimetre) thick Second class teak wood complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
46	Providing and fixing 35mm (Thirty five millimetre) thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (Three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
47	Providing vision panel not exceeding 0.1 sqm (One point one Square metre) in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
48	Providing and fixing 30mm (Thirty millimetre) thick pre laminated UPVC door shutters factory made panel UPVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mmx19mm (Nineteen into nineteen millimetre) for styles and 15x15mm (Fifteen into fifteen millimetre) for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm (Five millimetre) thick heat moulded PVC 'C' channel of size 30mm (Thirty millimetre) thickness, 70mm (Seventy millimetre) width out of which 50mm (Fifty millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered in 45 (Forty five) degree angle on both side forming styles and 5mm (Five millimetre) thick, 95mm (ninety five millimetre) wide PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimetre) wide PVC sheet out of which 75mm (Seventy five millimetre)shall be flat and 20mm (Twenty millimetre) shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel 10mm (Ten millimetre) (5mm x 2) thick, 20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5mm (Five millimetre) thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (Seven millimetre) (5mm+2mm) thick x15mm (Fifteen millimetre) wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm (Five millimetre) thick PVC strip of 20mm (Twenty millimetre) width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
49	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) JINDAL MAKE complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50	Providing and fixing 12mm (Twelve millimetre) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
51	Providing and fixing 12mm (Twelve millimetre) thick toughened reflective Glass of saint gobian with EPDM rubber /neoprene gasket etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
52	Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm (One point sixty plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100x8mm (One hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350x19x1.9) (Three hundred fifty into nineteen into one point nine) made of (big series) frame 67x60mm, (Sixty seven into sixty millimetre) sash 67x80mm, (Sixty seven into eighty millimetre) & mullion 67x80mm (Sixty seven into eighty millimetre) all having wall thickness of 2.3 ± 0.2mm (Two point three plus minus zero point two millimetre) and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
53	Providing and fixing Single /double glass panes factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm (One point sixty plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100x8mm (One hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etcetra Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etcetera After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
54	Providing and fixing Double Glass Unit float glass panes of 8mm (Eight millimetre) thickness glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
55	Providing and fixing 125mm (one hundred twenty five millimeters) nominal size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
56	Providing and fixing 150x10mm (One hundred fifty into ten millimeters) nominal size aluminum Matt finished tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
57	Providing and fixing 300x16 mm (three hundred into sixteen millimeters) nominal size aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
58	Providing and fixing 250x16mm (two hundred fifty into sixteen millimeters) nominal size aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
59	Providing and fixing bright finished brass 100mm (One hundred millimetre) mortice latch and lock with 6 (Six) levers and a pair of lever handles of approved quality with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
60	Providing and fixing 100x75x4mm (One hundred into seventy five into four millimetre) ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
61	Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
62	Providing and fixing stainless Steel concealed Hydraulic Door Closer etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
63	Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3 mm (Fifteen into three millimetre) and nuts and bolts complete Galvanised M.S. Wire gauze with 0.63mm (Zero point six three millimetre) dia wire and 1.4mm (One point four millimetre) aperture on both sides etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
64	Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm (Two hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete (only weight of grill to be measured for payment) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
65	Steel work in built up Electric resistance or induction butt welded tubes tubular (round, square or rectangular hollow tubes etc.) trusses etcetra, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
66	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etcetra , including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etcetra, stainless steel 304 grade of 50mm (fifty millimetre) diametre handrail fixed on 35mm (thirty five millimetre) diametre stainless steel baluster in combination with 15/20mm (fifteen oblic twenty) SST pipe baluster connected at the side of baluster with fixtures. the baluster would be fixed on to floor with casted base plate of minimum 6mm (Six millimetre) thickness.base plate shall be concealed with suitable S.S. 304 grade cover cape complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
67	Providing and applying white cement (Birla white/JK) /based putty of average thickness 1mm, (One millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
68	Wall painting with Asian Royale Aspira Emulsion Paint, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
69	Finishing walls with Textured exterior paint of Asian /Dulux /Berger /Nerolac Suraksha paints of approved shade (Two or more coats applied @ 3.28 litre/ 10 sqm (Three point twenty eight litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 litre/10 sqm (Two point twenty litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
70	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
71	Painting with Deco paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
72	Providing 10mm (Ten millimetre) thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5m (Five metre) above floor level, over first class kail wood strips 25x6mm (Twenty five into six millimetre) with 10mm (Ten millimetre) gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
73	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 (Twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) (Five point five into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
74	Suppying and fixing Metal grid False Ceiling including all material, labour T & P complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
75	Suppying and fixing 600x600 mm (Six hundred into six hundred millimetre) ACP False Ceiling including all material, labour T & P complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
76	Providing and fixing 12mm (Twelve millimetre) thick plain multipurpose cement fiber board as per IS: 14862(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc.complete (frame work to be paid seperatately). complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
77	Providing and fixing Ridges plain (600mm) (Six hundred millimetre) precoated galvanised steel sheet roofing accessories 0.60mm (Zero decimel six zero millimetre) (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 (Five to Seven microns) epoxy primer on both side of the sheet and polyester top coat 15-18 (Fifteen to eighteen) microns using self drilling/ self tapping screws complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
78	Providing and fixing Gutter (600mm (Six hundred millimetre) over all girth) precoated galvanised steel sheet roofing accessories 0.60 mm (Zero decimel six zero millimetre) (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
79	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110mm (One hundred ten millimetre) diameter complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
80	Providing and fixing on wall face unplasticised -PVC Bend 87.5° 110mm (One hundred ten millimetre) bend complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
81	Providing and fixing on wall face unplasticised -PVC 110mm (One hundred ten millimetre) Shoe (Plain) complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
82	Providing and fixing specified wood frame work consisting of battens 50x25mm (Fifty into twenty five millimetre) fixed with rawl plug and drilling necessary holes for rawl plug etcetera including priming coat complete. Kiln seasoned and chemically treated hollock wood complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
83	Providing and fixing plywood 4mm (Four millimetre) thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining I cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
84	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etcetera 2nd (Second) class teak wood 50x20mm (Fifty into twenty millimetre) complete as per specification,drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
85	French spirit polishing : Two or more coats on new works including a coat of wood filler complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
86	Suppying and fixing 2mm (Two millimetre) thick MS Sheet including all material, labour T & P complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
87	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etcetra, by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm (Zero point four eight eight kilogramme per square metre) mixed with water proofing cement compound @ 0.253 kg/ sqm. (at the rate zero point two five three kilogramme per square metre) This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. (at the rate one two six kilogramme per square metre) This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
88	Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm (at the rate Zero point four eight eight kilogramme per square metre) mixed with water proofing cement compound @ 0.253 kg/sqm. (at the rate zero point two five three kilogramme per square metre) (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5mm (One point five millimetre) thickness consisting of slurry of cement @ 1.289 kg/sqm (at the rate one point two eight nine kilogramme per square metre) mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. (at the rate one point two eight nine kilogramme per square metre) This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm (Thirty centimatre) on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
89	Providing and fixing 15mm (Fifteen millimetre) nominal outer diametre Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete for Concealed work, including cutting chases and making good the walls etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government
90	Providing and fixing 20mm (Twenty millimetre) nominal outer diametre Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00M. One meter This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete for Concealed work, including cutting chases and making good the walls etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government
91	Providing and fixing 25mm (Twenty five millimetre) nominal outer diametre Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete for Concealed work, including cutting chases and making good the walls etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
92	Providing and fixing 25mm (Twenty five millimetre) nominal bore Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplyincluding all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete for External work complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
93	Providing and fixing 32mm (Thirty two millimetre) nominal bore Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplyincluding all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete for External work complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
94	Providing and fixing 40mm (Forty millimetre) nominal bore Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplyincluding all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete for External work complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
95	Providing and fixing P.V.C. 32mm (Thirty two millimetre) diameter waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
96	Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore PVC connection pipe with brass unions complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including GST, Sales tax, Toll tax or any other taxes imposed by the Government.
97	Providing and fixing 20mm (Twenty millimetre) nominal bore ball valve (brass) of approved quality complete High or low pressure with plastic floats of approved quality complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
98	Providing and Fixing 20mm (Twenty millimetre) nominal bore stop cock including cutting and threading the pipe and making long screws etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
99	Providing and fixing 25mm (Twenty five millimetre) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
100	Providing and fixing 32mm (Thirty two millimetre) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
101	Providing and fixing 40mm (Fourty millimetre) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
102	Providing and fixing PTMT 15mm (Fifteen millimetre) Urinal spreader size 95x69x100mm (Ninety five into sixty nine into one hundred millimetre ) with 1/2\\" BSP thread and shapes, weighing not less than 60 gms (Sixty grams ) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
103	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm (Six millimetre) thick hard board backing : Rectangular shape 453x357mm (Four hundred fifty three into three hundred fifty seven millimetre) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
104	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, tripple layer of Finolex/Relpipe (Reliance)/Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ccomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
105	Providing and fixing 75mm (Seventy five millimetre) diametre unplasticised -PVC pipe clips of approved design to unplasticised -PVC rain water pipes by means of 50x50x50mm (Fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (One cement isto four coarse sand) and making good the wall etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
106	Providing and fixing 110mm (One hundred ten millimetre) diametre unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm (Fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (One cement isto four coarse sand) and making good the wall etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
107	Providing and fixing PTMT 100mm (One hundred millimetre) diametre grating of approved quality and colour. Circular type complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
108	Providing and fixing 125mm (one hundred twenty five) nominal diametre PTMT grating of approved quality and colour circular type with 25mm (Twenty five millimetre) waste hole complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
109	Providing and fixing PVC Coupler 75mm (Seventy five millimetre) diametre complete including cutting and making good the walls etc. as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
110	Providing and fixing PVC Coupler 110mm (One hundred ten millimetre) diametre complete including cutting and making good the walls etc. as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
111	Providing and fixing 75mm (Seventy five millimetre) diametre plain Shoe on wall face for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including ointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
112	Providing and fixing 75mm (Seventy five millimetre) diametre Plain Bend on wall face for rain water pipes working pressure 4/6 Kilogram/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
113	Providing and fixing 110mm (One hundered ten millimetre) diametre Plain Bend on wall face for rain water pipes working pressure 4/6 Kilogram/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
114	Providing and fixing PVC Single tee with door required degree access door 75x75x75x110mm (Seventy five into seventy five into seventy five into one hundred ten millimetre ) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
115	Providing and fixing PVC Single tee with door required degree access door 110x110x100x110mm (One hundred ten into One hundred ten into one hundred ten into one hundred ten millimetre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
116	Providing and fixing on wall face unplasticised Rigid PVC pipes 75mm dia (Seventy five millimetre) diametre complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
117	Providing and fixing on wall face unplasticised Rigid PVC pipes 110mm (One hundred ten millimetre) diametre including bedding with cement concrete 1:5:10 (One cement isto five sand isto ten graded/ crushed stone aggregate 40mm (Forty millimetre) nominal size including hounching all around the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
118	Providing and fixing PTMT extension nipple for water tank pipe, including fittings of approved quality and colour 20mm (Twenty millimetre) nominal bore. Weighing not less than 40gms (Fourty grams) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
119	Constructing masonry Chamber 60x60x90cm (Sixty into sixty into ninety centimetre) inside, in brick work in cement mortar 1:5 (One cement isto five coarse sand) for stop cock, with C. I. surface box 30x30x75mm ( Thirty into thirty into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (One cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size including necessary excavation, foundation concrete 1:5:10 (One cement isto five fine sand isto ten graded stone aggregate 40mm (Forty millimetre) nominal size and inside plastering with cement mortar 1:3 (One cement isto three coarse sand) 12mm (Twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
120	Constructing masonry Chamber 60x60x90cm (Sixty into sixty into ninety centimetre) inside, in brick work in cement mortar 1:5 (One cement isto five coarse sand) for stop cock, with C. I. surface box 30x30x75mm ( Thirty into thirty into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (One cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size including necessary excavation, foundation concrete 1:5:10 (One cement isto five fine sand isto ten graded stone aggregate 40mm (Forty millimetre) nominal size and inside plastering with cement mortar 1:3 (One cement isto three coarse sand) 12mm (Twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
121	Constructing brick masonry rectangular type manhole 600x600mm (Six hundred into six hundred millimetre) and 600mm (Six hundred millimetre) deep with bricks in cement mortar 1:5 (One cement isto five coarse sand) in side cement plastering with 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto three coarse sand) finished with a floating coat of neat cement outside plastering with cement mortar 1:3 (One cement isto three coarse sand) foundation concrete 1:4:8 (One cement isto four sand isto eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size, reinforced cement concrete top slab with 1:2:4 (One cement isto two sand isto four graded/crushed stone aggregate 20mm (Twenty millimetre) mininal size including finished with a floating coat of neat cement including excavation, refilling and diposal of surplus earth including ISI marked Perforated steel fiber reinforced concrete (SFRC) manhole cover and frame having hold fasts (medium duty) 600x450mm internal complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
122	Providing and fixing 75mm (Seventy five millimetre) nominal size PVC ap ISI marked of Jaguar of its equivelant including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
123	Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC trap ISI marked Jaguar of its equivelant including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
124	Provinding and Fixing 15mm (Fifteen millimetre) nominal bore/diametre Bib Cock with wall flange including all materials T & P etcetera complete (Make Jaguar or equivalent) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
125	Provinding and Fixing 15mm (Fifteen millimetre) nominal bore/diametre long nose bib cock with wall flange including all materials T & P etcetera complete (Make Jaguar or equivalent) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
126	Provinding and Fixing 15mm (Fifteen millimetre) nominal bore Piller cock including all materials T & P etcetera complete (Make Jaguar or equivalent) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
127	Provinding and Fixing 15mm (Fifteen millimetre) nominal bore Anguler Cock with wall flange including all materials T & P etcetera complete (Make Jaguar or equivalent) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
128	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of Jaquar cat no. CNS-WHT-751P180SPPZ with seat and lid, 10 (Ten) litre low level white P.V.C. dual flushing cistern, jet etcetera including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
129	Provinding and Fixing White Vitreous China Under Counter Wash Basin having size not less than 55x43cm (Fifty five into forty three centimetre) with including all materials T & P etcetera complete (Make Jaguar or equivalent) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
130	Provinding and Fixing White Vitreous China Wash Basin having size not less than 55x40cm (Fifty five into forty centimetre) with Full Padestal including all materials T & P etcetera (Make Jaguar or equivalent) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
131	Provinding and Fixing White Vitreous China Urinal having size not less than 39x37.5x59cm (Thirty nine into thirty seven into fifty nine centimatre) including all materials T & P etcetera complete (Make Jaguar or equivalent) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
132	Provinding and Fixing Urinal Partition including all materials T & P etcetera complete (Make Jaguar or equivalent) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
133	Providing and fixing towel ring round with Round Flang including all materials T & P etcetera complete (Make Jaguar or equivalent) with concealed fittings arrangement of approved quality and colour including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
134	Providing and fixing C.P. brass toilet paper holder : complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
135	Providing and fixing CP brass soap Dish Holder of Jaguar or its equivalent having length of 138mm (One hundered thirty eight millimetre), breadth 102mm (One hundered two millimetre), height of 75mm (seventy five millimetre) with concealed fitting arrangements, weighing not less than 106gms (One hundered six grams) including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
136	Supplying and Laying at site 90mm to 45mm (Ninety millimetre to forty five millimetre) size stone aggregate For Filteratioon Tank including supply of all materials T & P etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
137	Providing M.S. foot rests including fixing in manholes with 20x20x10cm (Twenty into twenty into ten centimetre) cement concrete blocks 1:3:6 (One cement isto three coarse sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) as per standard design : with 20x20mm (Twenty into twenty millimetre) square bar complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
138	Making soak pit 2.5m (Two point five metre) diameter 3.0 (Three point zero metre) deep with 45x45cm (Forty five into forty five centimetre) dry brick honey comb shaft with bricks and S.W. drain pipe 100mm (One hundred millimetre) diameter, 1.8 m (One point eight metre) long complete as per standard design. complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
139	Supplying and `Fixing of FRP Made garting above drain including labour material T & P complete as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. Please Enable Macros to View BoQ information

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Additional School Building At Govt. Senior Secondary School Dehra Distt. Kangra H.Pconstruction Of Civil Work, Including Water Supply & Sanitary Installation, Rain Water Harvesting System, Under Ground Water Tank And Septic, Dehra-Himachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Additional School Building At Govt. Senior Secondary School Dehra Distt. Kangra H.Pconstruction Of Civil Work, Including Water Supply & Sanitary Installation, Rain Water Harvesting System, Under Ground Water Tank And Septic, Dehra-Himachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us