|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 |
| 2 | Demolishing cement concrete manually by mechanical means including disposal of material within 50 metres lead as per direction of Engineer- in-charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 4 | Taking out doors, windows and clerestory windows (steel or wood) shutter including stacking within 50 metres Of area 3 sq. metres and below |
| 5 | Dismantling Old plaster or Skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 6 | Dismantling of flushing cistern of all types (CI/PVC/Vitrious China) including stacking of useful material near the site and disposal of Unserviceable materials within 50 meters lead. |
| 7 | Providing and Laying white or colored glazed tiles anti-skid (elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 8 | Providing and Laying white or coloured or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blue or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement,3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 9 | Providing fitting fixing Fibre Glass reinforced plastic door frames of cross section 90 x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. . The laminate shall be moulded with fire retardant grade unsaturated polyester resin and chopped Mat. Doorframe laminate shall be 2 mm thick and shall be fitted with suitable wooden blocks in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame. |
| 10 | Providing and fixing to existing door shutter 30 mm thick Glass Fibre Reinforced Polyester (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden blocks of seasoned wood inside at required placed for fixing and fittings, cast monolithically with 5 mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS 14856 2000 including fixing to frames. |
| 11 | Providing and fixing wire gauge shutter using galvanized M.S. wire gauge of average width of aperture 1.4mm in both direction with wire of dia 0.63mm for doors , windows clerestory windows with hinges and necessary screws. 30 mm thick shutter with ISI marked MS Pressed butt hinges bright finish of required size klin seasond and chemically treated hollock wood |
| 12 | Providing fitting and fixing water proof flush doors shutters, soIid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete. solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete. 30 |
| 13 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete : Size 300x16mm Brass (bright Finish) |
| 14 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. Size 300x16mm Aluminium |
| 15 | Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete. Brass (Bright Finish) |
| 16 | Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete. Aluminium |
| 17 | Providing and fixing Tower bolt 200x10mm with necessary screws etc complete. Brass (Bright Finish) |
| 18 | Providing and fixing Tower bolt 200x10mm with necessary screws etc complete.Aluminium) |
| 19 | Providing and fixing Tower bolt 150x100mm with necessary screws etc complete.Aluminium) |
| 20 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete Brass (Bright Finish) |
| 21 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete Aluminium) |
| 22 | Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete |
| 23 | Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanized Iron steel works including preparation of the surface complete. |
| 24 | Enamel paint: Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface Enamel Paint. |
| 25 | Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on old surface |
| 26 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes,sheIves,racks,aImirah,cupboard and drawer etc. including necessary naiIs,screws etc. complete as per direction of Engineer-in charge. |
| 27 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): |
| 28 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately):- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 29 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm). |
| 30 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipe. |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes. |
| 33 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL):ANGULAR STOP COCK 15 MM DIA |
| 34 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) STOP COCK 15 MM DIA (CONCEALED WORKS) |
| 35 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL): BIB COCK 15 MM DIA |
| 36 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL). Connection Pipe. |
| 37 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C)pan with seat and lid, with C.P. brass hinges, 10Itr low level cistern with fittings and brackets 40mm flush bend, 20mm over flow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European Bidets standard CAT NO 30001 |
| 38 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL);BASIN MIXTURE |
| 39 | Providing, fitting and fixing towel ring of chromium plated brass complete with CP brass screw and timber cleats. |
| 40 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. :600x20 |
| 41 | Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete. |
| 42 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. 100 mm dia. PRINCE/ SUPREME or equivalent soil pipe |
| 43 | Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes: 100 mm dia. Supreme / Prince |
| 44 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia. |
| 45 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3 (1cement, 1.5 coarse sand,3 graded stone aggregate of 20mm & down size) |
| 46 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge. (Contech/Perma/Zydex/Chryso) |
| 47 | Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. 1:4 mix |
| 48 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete: 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size) |
| 49 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm |
| 50 | Providing and fixing wire mesh in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire. |
| 51 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL). Two way Bib Cock 15 mm dia. |
| 52 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL). Health Faucet |
| 53 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 54 | Applying priming coats with primer of approved brand and manufacture, having low VOC(Volatile organic compound) content with water thinable cement primer on wall surface having VOC content less than 50 grams/litre |
| 55 | Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 56 | Providing and Providing and painting with plastic Emulsion paints one or more coats on old surface of required shade to give even shade in- including brushing the surface clean of all dirt, dust and smoothened by sand paper etc complete |
| 57 | Removing dry oil bond distemper by scrapping, sand papering and preparing the surface smooth including repairs to scratches etc complete. |
| 58 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on old surface. |
| 59 | Providing and fixing. wash basin with CI brackets, 15mm dia CP brass single hole basin mixer of approved quality and make including painting of fittings and brackets, cutting and making good the walls wherever required white viterous china washbasin size 550x400mm with15mm CP brass single hole basin mixer |
| 60 | Providing and fitting of standard size mirror of quality equivalent to Admiral and size 20\\"x16\\" complete |
| 61 | Providing and fixing 600x120x5 mm glass self with edges round off, supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with 40mm long screws rawl plug etc. complete. |
| 62 | Providing and fixing 6 mm thick both sides Pre- laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. |
| 63 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 64 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5° 110 mm bend |
| 65 | Wiring for light/fan/call bell/& 6A plug point with 2X1.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality in best quality recessed alkathine pipe and earthing the point with 1X1.5 sqmm HRFRLS PVC insulated Copper Conductor single core cable as required. |
| 66 | Wiring for 16 A plug point with 2X2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quqlity in best quality recessed alkathine pipe and earthing the point with 1X2.5 sqmm HRFRLS PVC insulated Copper Conductor single core cable as required. |
| 67 | Wiring for sub main for light/fan/call bell/& 6A plug point with 2X2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality in best quality recessed alkathine pipe and earthing the point with 1X2.5 sqmm HRFRLS PVC insulated Copper Conductor single core cable as required. |
| 68 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.: 12 Module (200mmX150mm) |
| 69 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.: 8 Module (125mmX125mm) |
| 70 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.: 6 Module(200 mmX75mm) |
| 71 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.: 4ModuIe(125 mmX75mm) |
| 72 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.: 3 Module(100 mmX75mm) |
| 73 | Supplying and fixing following modular switch/ socket on the existing modular plate & sw8itch box including connections but excluding modular plate etc. as required.: 5/6 A switch |
| 74 | Supplying and fixing following modular switch/ socket on the existing modular plate & sw8itch box including connections but excluding modular plate etc. as required.: 3 pin 5/6 A socket outlet |
| 75 | Supplying and fixing following modular switch/ socket on the existing modular plate & sw8itch box including connections but excluding modular plate etc. as required.: 2 Way 5/6 A switch |
| 76 | Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required. |
| 77 | Supplying and fixing Modular Blanking Plate on the existing blanking Plate & Switch Boxes excluding modular plate as required. |
| 78 | Supplying and fixing suitable size GI box along with modular plate & cover plate in front of surface or recessed including providing and fixing 6 pin 5/6&15/16 ampand 15/16A modular switch connection etc as required. |
| 79 | Supply and fixing3 pin ,5A Ceiling Rose on existing junction Box/Wooden Block including connections etc as required. |
| 80 | Supply and fixing angle/ batten holder with 9 watt LED Lamp including connection etc as required |
| 81 | Supply and fixing Surface LED fitting 12 watts including connection etc as required |
| 82 | Supply and fixing wall mounting mirror light including connection etc as required |
| 83 | Supply and fixing LED Bulkhead fitting including connection etc as required |
| 84 | Supply and fixing Calling Bell (Ding Dong) with 100mmX150mm Sunmica Box including connection etc as required |
| 85 | Supplying and inatallation of MCB Distribution Board Double/Single door (confirming to CPWD/NBC/Relevent IS&BIS Code): 12 Way SPN (Single Door) |
| 86 | Supplying, inataIIation,Testing & commissioning of Miniuature Circuit Breaker(confirming to CPWD/NBC/Relevent IS&BIS Code): Single Pole 6-32 amp |
| 87 | G.I Tube type 1 m long lightning arrester having prong on the top of the arrester and base plate with nut and bolt. |
| 88 | G.I. earth strip 25mmX5 mm From G.I. earth electrode |
| 89 | Earthing with GI 600mmX600mmX6mm thik including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of2.7 metre long etc with charcoal/coke and salt as required |
| 90 | Switchgear & Panel accessories:(i) Supply, lnstaIIation, Testing and Commissioning of 16 Way Meter Panel suitable for operation on 433 V,50Hz 3 phase 4wire AC system capable of withstand fault level 50 KA,433V.The Panel shall be indoor, MetaI CIad, Spray painted, Dust & Vermin Proof, Compartment type enclosure & Fabricated out of 1.6mm Thk CRCA sheet Steel with Necessary BUS-BAR, Cable alleys and foundation channel .The Incoming & Outgoing feeder shall be accommodated in a modular-tier arrangement. Painting ,Earthing, Sign writing, Numbering shall be complete with foundation channel as per specification & SLD& comprise of the following Switchgear and accessories(shop drawing to be got approved prior to execution).(ii) INCOMER:a) 125 A,415V,TPN Switch Fuse Unit with HRC fuse- 1set Make- Siemens/ GE/L&T/ HaveIIs/ Schnider.b) 3 Phase digital Amp meter with suitable CT and selector switches .c) 3 Phase digital Volt meter with selector switches.d) Phase indicator Lamp with Fuse-1Set.(iii) OUTGOINGS:a) 32 A,415V,SPN Switch Fuse Unit with HRC fuse-1set. Make-Siemens/ GE/L&T/ HaveIIs/Schnider.b) Space for Single Phase Energy meterc) BUS BAR-200 Amp TPN Aluminium busbar suitable for 50 KA fault level covered with colour coded PVC sleeves of minimum size(width 25mm Thk-10mm)-1 Set |
| 91 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and amking good the same in case of recessed conduit as required.- 20 mm |
| 92 | Supplying and fixing of following size/ modules GI Box along with modular base and cover plate for modular switches in recess etc. as required -2 Module. |
| 93 | Supplying and fixing of following modular Switch/ Socket on the existing Modular Plate & switch box including connections but excluding modular plate etc. as required - LAN Switch Sockets & Accessories Modular Dual Outlet |
| 94 | Supplying and Drawing of UTP 4-Pair Cat-6 LAN in the existing surface / recessed steel/ pvc conduit as required - 1 Run of cable |
| 95 | Supplying and Drawing of UTP 4-Pair Cat-6 LAN in the existing surface / recessed steel/ pvc conduit as required - 2 Run of cable |
| 96 | Supplying and fixing of 4U Rack Enclosures Networking/Server Rack Please Enable Macros to View BoQ information |
