|
| 1 | 1) Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: |
| 2 | 1.1) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 3 | 2) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 4 | 3) Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 5 | 3.1) Old work (one or more coats) |
| 6 | 4) Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 7 | 4.1) Two coats |
| 8 | 5) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | 6) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 10 | 6.1) One or more coats on old work |
| 11 | 7) French spirit polishing : |
| 12 | 7.1) One or more coats on old work |
| 13 | 8) Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade |
| 14 | 8.1) Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface |
| 15 | 8.2) Old work (one or more coats applied @ 0.83 Itr/10 sqm). |
| 16 | 9) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 17 | 9.1) With cement mortar 1:4 (1cement: 4 coarse sand) Please Enable Macros to View BoQ information |
