|
| 1 | Dismantling floor, hearth or wall tiling and kota stone including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises and removal of debris out side from MD land etc complete all as specified and directed. |
| 2 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed. |
| 3 | S&F for glazed ceramic coloured tiles 300x600x7mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM (1:3) as in backing coat complete all as specified and directed. |
| 4 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured to match coloured tiles, Complete all as specified and directed. |
| 5 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as skirting / dados Complete all as specified and directed. |
| 6 | M&L for prepolished 600x600mm machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 7 | Taking down cement plaster of any description from walls, ceilings etc. including raking out joints, hacking for key, scrubbing down with water etc. removal of rubbish off the premises and removal of debris out side from MD land etc complete all as specified and directed. |
| 8 | M&L for 15mm thick rendering in CM (1:6) internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed. |
| 9 | M&L for rendering 5 mm thick on fair faces of brick or concrete surfaces of ceilings in CM (1:3), finished even and smooth without extra cement complete all as specified |
| 10 | M&L for rendering in CM (1:4) 20 mm thick in two coats (15 mm under coat + 5mm finishing coat) on brick/concrete surfaces with water proofing compound @3% by weight of cement in finishing coat and finishing the surface even and fair.(Note :- WPC will be measured and paid seperately). |
| 11 | Supply only integral WPC all as specified & directed. |
| 12 | M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer including 1.5mm thick wall care putty, complete all as specified and as directed . |
| 13 | M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper paint on ceiling over a coat of alkali resistant primer ncluding 1.5mm thick wall care putty, complete all as specified and as directed . |
| 14 | M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of acrylic emulsion paint (two or more coat applied @ 1.67 ltr/10 sqm over including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including 3mm thick wall care putty complete all as specidied and as directed |
| 15 | M&L for complete removal of existing treatment of surfaces of walls, Chajjas, parapets and applying crack sealing compound of approved make wall care putty and applying one coat of extrior grade primer and two coat of arcylic exterior emulsion paint, Complete all as specified and directed. |
| 16 | M&L for preparation of old decorated surfaces and preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coat of oil bound distemper paint on walls complete all as specified and as directed . |
| 17 | M&L for preparation of old decorated ceiling surfaces and preparation of surfaces including filling of the holes/cracks on ceiling with plaster putty and applying one coat of distemper on ceiling complete all as specified and as directed . |
| 18 | M&L for preparing old wooden surface and apply one coat of synthetic enamel paint of any description, not otherwise descri-bed, over 10cm width or girth, complete all as specified and directed. |
| 19 | M & L Counter top wash basin size 405x580x185 Cat No- FNS-WHT-40601, pillar tap etc making good to match existing surface complete all as specified and directed. Make - Jaquar or Equivalent (Note : - Rate quoted is inclusive of cutting holes in granite for fixing of waste pipe and wash basin) |
| 20 | M&L Granite 20mm thick (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 21 | M&L Granite 20mm thick (of any type) work (table rubbed and polished) in shelf, jambs, window cills, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 22 | Materials and Labour for factory made precast cement concrete block masonry (1:3:6) type C1 using 20 mm graded stone aggt with solid blocks, exc10 cm in width, set in cement morter (1:6) in wall (below or above ground level) complete all as specified and directed. |
| 23 | S&F for looking mirror 900mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plgs with chromium plated brass screws and cup washers inlcuding taking down old complete all as specified and directed |
| 24 | Supply and Fix 12mm thick Plywood, grade BWR, type BB, fixed with nails to timber framework as in wardrobe, wall panelling etc complete all as specified and directed. |
| 25 | M&L for 0.9MM thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 26 | S & F for 30mm width of flaps (When opening) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 27 | S&F for Brass 4 lever Cupboard Lock 75mm size of approved type and pattern etc complete all as specified and directed. |
| 28 | S&F for magnetic catcher of approved size and pattern fixed to shutters etc complete all as specified and directed. |
| 29 | S&F in repair vitreous china, 1st quality urinal half stall type, white, with and including brass chromium plated flush pin, 40mm dia brass CP waste coupling and 40mm dia PVC HDPE waste pipe with all other necessary fittings etc complete all as specified and directed. |
| 30 | S&F for 32MM dia bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms), complete all as specified and directed. |
| 31 | S&F for 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends etc inlcuding taking down old complete all as specified and directed |
| 32 | S&F for PVC connections 15mm size with PTMT nuts of length 600mm |
| 33 | S&F for 15 mm dia bore medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors including takong up or down, complete all as specified and directed. |
| 34 | S&F for 20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors including takong up or down, complete all as specified and directed. |
| 35 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10cm girth, complete all as per specified and directed. |
| 36 | S&F in repairs for Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc and including 10 Ltr concealed flushing cistern & flush pipe (including demolition & construction of wall tiles, brickwork and making good as required as directed by Engr-in -Charge, Complete in all respect all as specified. |
| 37 | S&F for 2 way CP Bib cock double handle with flange and all necessary fittings inlcuding taking down old complete all as specified and directed |
| 38 | S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 39 | Supply and fixing factory made uPVC coloured Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Complete all as specified and directed |
| 40 | Taking down door/ window/ventilator shutter with frame (without taking off shutters from frame) of any description n.exc. 1.50 Sqm each etc complete all as specified and as direted. |
| 41 | Providing and fixing factory made uPVC coloured Sliding window area not Exceeding 2.00 Sqm Each, Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 42 | Supply only 5.50 mm thick float glass (area of each pane exc 0.50 sqm) fixed in aluminium sliding window/door shutters etc complete all sas specified and directed. |
| 43 | S&F for Solar controlled film 50 micron reflective type sticked to glass as per instructions of manufacturers all specified and directed. |
| 44 | S&F for 20mm dia & 60 cm long `D' type, chromium plated brass tubular towel rail between flanges inlcuding taking down old complete all as specified and directed |
| 45 | S&F for 15mm bore fancy type bib tap, cromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed inlcuding taking down old complete all as specified and directed. |
| 46 | S&F for soap dish of PTMT any colour fixed with and including CP brass screws and wooden/plastic cleats inlcuding taking down old complete all as specified and directed |
| 47 | S&F for towel ring of long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats (minimum weight 90gms) inlcuding taking down old complete all as specified and directed |
| 48 | S&F for CI floor/nahani trap 75mm dia with grating, incl jointing to waste pipe in run lead complete and making good the disturbed surface to match existing surface inlcuding taking down old complete all as specified and directed |
| 49 | Demolition & breaking up drain pipes upto 110/75 mm dia (salt glazed ware, AC,PVC or reinforced concrete) set in cement mortar. |
| 50 | S&F for 75mm bore of pipe PVC (SWR) pipes single socketted in any length with rubber ring joints laid in walls / floors etc complete all as specified and directed. |
| 51 | S&F for 110mm bore of pipe PVC(SWR) pipes single socket in any length with rubber ring joints laid in walls /trenches or in floors etc complete all as specified and directed. |
| 52 | S&F for PVC (SWR) 75mm Bore Bends any radius |
| 53 | S&F for PVC (SWR) 110mm Bore Bends any radius |
| 54 | S&F for PVC (SWR) 75mm Bore vent cowl |
| 55 | S&F for grating doom 100mm dia of PTMT (min weight 25gms) inlcuding taking down old complete all as specified and directed |
| 56 | S&F for grating doom 100mm dia with waste hole of PTMT (min weight 40gms) inlcuding taking down old complete all as specified and directed |
| 57 | S&F in repairs shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Min wt 40 gms) |
| 58 | S&F for Brass Chromium plated shower roses 125MM Sizewith or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 59 | S&F for 3 in 1 Brass CP wall mixer for mixing hot & cold water including water supply to shower arm, 15mm bore dia pipe, screwed down for iron pipe and fixed, complete all as specified and directed. |
| 60 | M&L for sunken floor treatment by providing injection pressure grouting treatment using cement slurry mixed with grout admixtures non shrink additive using 40 PSI pump complete and applying two coat of brush bond acrylic polymer modified cement based coating thickness 1mm or two coats of pidfin 2K arcylic polymer water proof coating including necessary surface preparation, providing 20mm thick water proofing sccreed bed/Plaster in CM 1:4 mixed with conplast X42IIC @ 100 ml or Pidiproof LW @ 200 ML per bag cement. Two coat of Nitro proof 100 bitumen based water proofing coating over plastered surface complete all as per specification of chemical resitant coating, Complete all as specified and directed by Engr-in-Charge. Note:- The work shyall be executed through aothorized applicator of M/S Fosroc / M/S Pidilite using the materials supplied by M/S Fosroc chemical (India) Pvt Ltr or M/S Pedilite Industries Ltd and in accordance with their repective manufacture's Instruction. |
| 61 | S&F Mild steel work of angle iron or flat iron etc for railings, balusters, nosing to steps including embedding in concrete and screwing etc, flat iron for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290 complete all as specified and directed. |
| 62 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 63 | M&L for Preparation of old steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 64 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 65 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in hangar door /cladding to wall, height n.exc 20m, fixed with self tapping screws complete all as specified and directed. |
| 66 | M&L Pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in valley gutter/ridge etc fixed with self tapping screws complete all as specified and directed. |
| 67 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 68 | S&F for 150mm bore of pipe PVC(SWR) pipes single socket in any length with rubber ring joints use as helf cut pipe for eave gutter including all necessary items for fitting (Like stopend, pipe clip, single fix pipe clip, shoe, bend, uniod, bracket, all degree angle bends as required at site) fitted with roof shed scantling etc complete all as specified and directed. |
| 69 | Taking down of rolling Shutters of any description exc 2 sq.m each, Completed all as specified and directed. |
| 70 | Taking down of rolling Shutters and refixing in same opening of any description exc 2 sq.m each, Completed all as specified and directed. |
| 71 | S&F for 12MM thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and including Coast Guard Logo and design on glass as direceted by department. Complete all as specified and directed. |
| 72 | S&F for centre lock with strike box (Size 186 x 100 mm) in toughened glass door including cutting, making holes and screws etc complete in all aspect and as directed by Engr-in-Charge. |
| 73 | S&F aluminium top insert size 75x22 mm long with top strap (110x202mm) including drilling, screwing etc complete in all aspect and as directed by Engr-in-Charge. |
| 74 | S&F aluminium floor spring including bottom insert size 75x22 mm long and bottom strap (112x26/21mm) including drilling, cutting of floor and all accessories etc complete in all aspect and as directed by Engr-in-Charge. |
| 75 | S&F stainless steel pair of handle bars fixed (1240mm) in toughened glass including making holes etc complete in all aspect and as directed by Engr-in-Charge. |
| 76 | Taking down carefully copper/aluminium point wiring (light,fan socket or power) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch,MCB and DB's etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 77 | Taking down carefully copper/aluminium point wiring (light,fan socket or power) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch,MCB and DB's etc complete all as specified and directed. Please Enable Macros to View BoQ information |
