|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exc 4sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each. |
| 4 | Taking down Shutters of any description n.exc 1 sq. m each. |
| 5 | Cutting chases pinning in making good for brick walls to facing where required and pointing in cement mortor 1:3 to ends or edges of concealed water tubing and similar work including making good cutting not exc 10CM girth complete all as specified and directed. |
| 6 | Taking down boards of any description and any size as in shelves complete all as specified and directed. |
| 7 | Taking down, easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws etc, and refixing in the same opening after laying of tiles, shutters of any description exceeding 1.0 sq.m but not exceeding 2.0 sq.m each, complete all as specified and directed. |
| 8 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar 1:4 and finished to match with existing surface complete all as specified and directed. |
| 9 | Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheets for top rails and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded / sealed to the stiles, rails with suitable PVC sheet beading and joined to gether with solvent cement supplying & fixing in the frame at site complete all as specified and directed. |
| 10 | Pressed steel frames of size 105 x 60mm x 1.25 mm thick for door with one or more rebates, including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 11 | Pressed steel frames of size 125 x 60mm x 1.25 mm thick for door with one or more rebates, including necessary fixing lugs, hinges, lock strike plate, Single action spring hinges etc complete all as specified and directed. |
| 12 | PCC 1:3:6 type C0 using 12.5mm graded stone aggregated as in filling the chowkats / frames complete all as specified and directed. |
| 13 | 35 mm thick plain, framed, panelled factory made shutters with IInd class hardwood rail and style with lock rail and panel of 9 mm BWP commercial ply with commercial vaneer on both faces. The size of rail and style as per IS-1003 Part-I complete all as specified and directed. |
| 14 | 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping / frame to match all as specifed and directed.Note: The rates for flush shutters include for the provision of suitable blocks for fixing mortice locks, latches, or other fittings. |
| 15 | 35mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive gauge (without sash bars) edges of framing plain, chamfered or round fitted with cut and mitred beads for securing wire gauge sizes of members of shutters all as specified and directed. |
| 16 | 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work, shelves of cupboard & door etc, all as specified and directed. |
| 17 | M&L for PVC lipping fixed to prelaminated particle board to match with color of board and width etc, complete all as specified and directed. |
| 18 | 18/19 Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one side and other side balancing white face; fixed with screws to timber frame work, shelves of cupboard & door etc, all as specified and directed. |
| 19 | All as per Sl item No. 18 above but 12mm thick. |
| 20 | All as per Sl item No. 18 above but 09mm thick. |
| 21 | Fancy type stainless steel handle of size 100 mm long complete all as specified and directed. |
| 22 | Magnetic ball catches of standard type fixed complete all as specified and directed. |
| 23 | Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised with width of flaps (when open) 40 mm. |
| 24 | Aluminium channel for double track 18mm thick sliding shutter including required wheels and necessary fittings all specified and directed. |
| 25 | Aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and directed. |
| 26 | Aluminium anodised barrel tower bolts of extruded section, 150 mm long fixed in repairs all as specified and directed. |
| 27 | Aluminium anodised barrel tower bolts of extruded section, 100 mm long all as specified and directed. |
| 28 | 150mm long extruded aluminium alloy handles, fabricated type anodised all as specified and directed. |
| 29 | 150mm long extruded aluminium alloy handles, fabricated type anodised fixed in repairs all as specified and directed. |
| 30 | Aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and directed. |
| 31 | Aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long fixed in repairs all as specified and directed. |
| 32 | 100 mm size hasp and staple, safety type, aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as directed. |
| 33 | Door stopper of rubber and aluminium alloy body, 150 mm size fixed in repairs all as specified and directed. |
| 34 | Door stopper of rubber and aluminium alloy body, 150 mm size all as specified and directed. |
| 35 | Mortice lock, (six lever) vertical type mild steel of 100mm size including handle, screwing and fixed in repairs all as specified and directed. |
| 36 | Magic eye fixed to wooden door shutter complete all as specified and directed. |
| 37 | SS butt hinges medium weight of size 100 mm complete all as specified and directed. |
| 38 | Mild steel butt hinges medium weight cold rolled of size 100 mm including necessary welding fixed in repairs complete all as specified and directed. |
| 39 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified. |
| 40 | Dismantling of composite steel windows / ventilators not exceeding 0.60 Sqm single leaf double shutter with fixed portion including taking down glass panes and mosquito proof mesh but except grill / guard bars in any position complete all as specified and directed (ONLY SHUTTER DISMANTLING). |
| 41 | Dismantling of composite steel windows / ventilators exceeding 0.60 Sqm but not exceeding 1.80 Sqm double / triple leaf double shutter with fixed portion including taking down glass panes and mosquito proof mesh but except grill / guard bars in any position complete all as specified and directed (ONLY SHUTTER DISMANTLING). Please Enable Macros to View BoQ information |
| 42 | Dismantling of composite steel windows / ventilators exceeding 0.60 Sqm but not exceeding 1.80 Sqm double / triple leaf double shutter with fixed portion including taking down glass panes and mosquito proof mesh but except grill / guard bars in any position complete all as specified and directed (ONLY SHUTTER DISMANTLING). Please Enable Macros to View BoQ information |
