|
| 1 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 4 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for foundation/ mass concrete complete all as specified and as directed. |
| 5 | Material and labour for RCC Type B-1, 1:2:4 (20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams,lintel beam, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 6 | Material and labour for RCC Type B-1, 1:2:4 (20 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, complete all as specified and as directed. |
| 7 | Material and labour for RCC Type B1 (1:2:4) (20 mm graded aggregate) in Columns, pillars, piers, posts and struts etc complete all as specified and as directed. |
| 8 | Supply and fixing of TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 9 | Description all as per item No 8 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 10 | Material and labour for formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 11 | Material and labour for formwork square, rectangular or plougonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed |
| 12 | Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM ( 1:6 ) complete all as specified and as directed. |
| 13 | Description all as per Item No. 12 above but except bricks complete all as specified and directed. |
| 14 | Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 15 | Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6) finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 16 | Material and labour for preparing of new surfaces of walls and applying two coats of cement base paint over a coat of primer etc complete all as specified and as directed. |
| 17 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed. |
| 18 | Removing excavated materialn exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point point complete all as specified and as directed. |
| 19 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 20 | Material and labour for preparation of wall and applying interior grade wall care putty not less than 1 mm thick to make the surface smooth as specified and directed. |
| 21 | Material and labour for preparation of wall and applying exterior grade wall care putty not less than 1 mm thick to make the surface smooth as specified and directed. |
| 22 | Material and labour for preparation of new surface of wall and applying two coats of oil bound distemper includind and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 23 | Material and labour for prepration of new plastered surface and applying two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 24 | Material and labour for complete removal of old existing treatment on wall plastered or unplastered surfaces of walls over 1 mm thickness plaster of wall putty after preperation of surface including,two coat of oil bound distemper on wall complete all as specified and directed. |
| 25 | Material and labour for complete removal of old existing treatment on wall plastered or unplastered surfaces of walls over 1 mm thickness plaster of wall putty after preperation of surface including,two coat of acrylic emulsion paint on external wall complete all as specified and directed. |
| 26 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified |
| 27 | Material and labour for PCC 1:3:6 type C-I using 20 mm graded aggregate as in surface channel, drain etc. including necessary use and waste of form work complet all as specified and directed. |
| 28 | Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided. |
| 29 | Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds mitered or stopped ends etc. complete all as specified and directed. |
| 30 | Add or deduction for each 25 mm girth or part thereof over or under 30 cm ditto |
| 31 | Material and labour for 300mm X 300mm and 10mm thick high traffic paver tiles (colured) joint free as in floor etc and set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 32 | Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed |
| 33 | Supply and fixing of mild steel rolled section in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, staging for water tanks, gusset plates etc. conforming Fe-410W(Gde E-250) complete all as specified and as directed. |
| 34 | Material and labour for two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 35 | Material and labour for two coats of synthetic enamel paint on old untreated steel surfaces of any description over 10 cm width or girth including preparation of steel surfaces complete all as specified and directed. |
| 36 | Dismantling of asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings complete all as specified |
| 37 | Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls/chajja covering etc fixed with self tapping screws as specified and directed. |
| 38 | Supply and fixing of pre-painted galvalume aluminum zinc coating GI based crimped ridge with profile sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge , fixed with self tapping screws as specified having cap with rubber and metal washer complete all as specified and directed. |
| 39 | Supply and fixing of false ceiling with Everest Fibre Cement Designer tile Ivory painted (High pressure steam cured) of 6mm thickness (as per IS: 14862) of size 595 x 595 mm and any one of the design (Ocean, lake & hill, cascade or electra ) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and 15 x 32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \\"T\\" of size 15 x 32 mm made of 0.30 mm sheet, 1200 mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200 x 600 mm and secondary cross \\"T\\" of length 600 mm and size 15 x 32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 15 x 20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making , opening for services like diffusers, grills, light fittings, fixture, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3 mm dia with galvanised butterfly level clips, spaced at 1200 mm c/c along centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/Sqm including dismantling of existing false ceiling of any description complete all as specified and as directed. |
| 40 | Supply and fixing of rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of water tank and remove from site complete all as specified and as directed |
| 41 | Supply and fixing in repair of false ceiling with 'E' board \\"Classic\\", reinforced, designer series, board with HPSC of size 595 mm x 595 mm x 4 mm thick fixed on existing snap grid frame complete all as specified and as directed |
| 42 | Supply and fixing of aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down unserviceable existing partion etc of following sizes;-Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thickBottuom section;-100x44.5x1.22 mm thickComplete all as specified and directed by the Engr in chargeMake: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Green ply/Kit ply/ Century ply (iii) Glass: Saint gobain / Modi guard / Tata |
| 43 | Supply and fixing in repair of aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm |
| 44 | S&F in repair aluminium alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200mm size, one door closer,one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make : Sandhu/Titz ) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12 mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw, complete all as specified and directed at site. Chowkhat frame : 101.60x44.45x1.60mm, Shuter verticle style : 85x44.45x1.56mm, Shutter top rail and bottom rail : 114.30x44.45x1.55mm |
| 45 | Repair to aluminium door/window including taking down, replacement of unserviceable hinging device, handles, making them in serviceable condition and re-fixing in same opening complete all as specified as directed. |
| 46 | Material and labour for vitrified ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed |
| 47 | Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 48 | Material and labour for PCC (1:4:8) type D-2 (using 20 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed. |
| 49 | Supply and fixing of 200 mm salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected. |
| 50 | Material and labour for cleaning of existing covered / uncovered (partly / semi or fully filled up) drain, of any opening width and depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain and removing the same at a distance exceeding 500 metre but not exceeding 1 Kilometre where directed, washing of the drain with water complete all as directed. |
| 51 | Supply and fixing in repair of RCPC (Reinforced Cement Polymer Concrete) man hole cover with frame of size 750mm x 600mm (anti skid top) fixed in proper position in existing man hole complete all as directed. |
| 52 | Supply and fixing of hollow profile PVC Wall panneling consisting of 5mm thick PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing including taking down the existing Wall penalling etc complete all as specified and directed. |
| 53 | Supply and fixing of mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and ditected. |
| 54 | Supply and fixing of providing and fixing stainless steel ( Grade 304) railing made of hellow tubes, channels, plates etc, including welding,grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nut and bolts complete including fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolt etc of required size on top of floor or the side of waist slab with suitable arrangement as per design complete all as per direction of Engineer-in-Charge. |
| 55 | Supply and fixing in repair 25 mm dia stainless steel polished 304 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed as per approved sample complete all as specified and ditected. |
| 56 | Material and labour for 25 users Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc. (Ref TD/217 of CE Bareilly Zone ) complete all as shown in drawing and ditected. |
| 57 | Material and labour for soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / filling with brick bats, complete of size 2.4 M dia X 3.0M deep (Ref CE Bareilly Zone TD) complete all as shown in drawing and ditected. |
| 58 | NOTE:- Amount of credit of Rs. 81315.00 for retrieved materials is mentioned in Schedule of Credit Page No 18 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
