|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 3 | M & L Non skid coloured ceramic tiles each tile area (square/rectangle) exc 0.06 Sqm but n.exc 0.11 Sqm tile thickness 7 to 8mm, in floors etc. set and joined in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer with CM 1:6, 15mm thick for laying floor finishes complete all as specified and as directed. |
| 4 | M & L Glazed ceramic tiles coloured 350 x 250 x 7mm/ 450 X 350 X 7mm thick on vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick in CM 1:4 as backing coat for fixing dado tiles complete all as specified and as directed. |
| 5 | M & L Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust, etc., brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed. |
| 6 | M & L Non skid ceramic coloured tiles, area of each tile exc 0.18sqm and n.exc 0.38sqm (square/rectangle) 7 to 8mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick cement screed in CM 1:6 complete all as specified and as directed. |
| 7 | All as per item No.6 here in before, but on vertical surfaces including 10mm thick CM 1:4 as in backing coat of dado/skirting complete all as specified and as directed. |
| 8 | M & L PCC 1:3:6, 75mm thick Type C-2 (using 40mm graded aggregate) as in plinth protection/hard standing finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 9 | Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc. and making good, cutting n.exc 10cm girth complete all as specified and as directed. |
| 10 | Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 20mm complete including taking down complete all as specified and as directed. |
| 11 | Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 25mm complete including taking down complete all as specified and as directed. |
| 12 | Supplying and laying of brass elbow of 20mm for CPVC pipe complete all as specified and as directed. |
| 13 | Supplying and laying of brass Tee of 20mm for CPVC pipe complete all as specified and as directed. |
| 14 | Supplying and laying of brass Elbow (3/4 x 1/2) of CPVC pipe outer diameter of 20mm complete all as specified and as directed. |
| 15 | Supplying and laying of brass elbow for CPVC pipe outer diameter of 25mm complete all as specified and as directed. |
| 16 | Supplying and laying of brass Tee for CPVC pipe outer diameter of 25mm complete all as specified and as directed. |
| 17 | S & F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) including Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc., complete all as specified and as directed. |
| 18 | S & F Vitreous China wash basin, white, flat back, size 630 x 450mm including cutting for and pinning in ends of brackets or erecting stand brackets, 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms & waste pipe including taking down of old wash basin complete all as specified and as directed. |
| 19 | M & L in repairs 10 litres capacity PVC low level flushing cistern including flush pipe complete with ISI marked body and ISI marked syphon complete all as specified and as directed.(Make:- Parry ware Slimline or equivalent) |
| 20 | S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 21 | S & F in repairs bib cock, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed complete all as specified and as directed. |
| 22 | S & F in repairs bib cock two way double Handle with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15mm bore or for brass ferrule and fixed complete all as specified and as directed. |
| 23 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 24 | S & F in repairs fancy type chromium plated angle cock long body complete all as specified and as directed. |
| 25 | S & F CP wall mixer 2 in 1 for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe complete all as specified and as directed. |
| 26 | S & F swan neck bib taps for sink chromium plated, screwed down, high pressure, with or without lettered with long screwed shanks and fly nuts, screwed for 15mm bore complete all as specified and as directed. |
| 27 | S & F in repairs pillar taps, fancy taps chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15mm bore complete all as specified and as directed. |
| 28 | S & F in repairs mirror of size 600 X 450mm of selected quality glass mounted on 6mm thick AC building boards or on commercial plywood with aluminium beading around and fixed to wooden plugs with Chromium plated brass screws complete all as specified and as directed. |
| 29 | S & F stainless steel Soap Dish complete all as specified and as directed. |
| 30 | S & F Towel rail 600mm long & including Chromium plated brass screws & wooden/ plastic cleats (Minimum weight 190gms) complete all as specified and as directed. |
| 31 | S & F in repairs Chromium plated 125mm shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 32 | S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40mm dia brass cp waste coupling complete all as specified and as directed. |
| 33 | S & F kitchen plate rack made stainless steel 0.8mm thick complete of size not less than 900 x 750 x 200mm, duly assembled and fixed to wall with wall screws / fasteners complete all as specified and as directed. |
| 34 | M & L machine cut Granite slab 20mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete nosing edges including 20mm thick cement screed in CM 1:6 complete all as specified and as directed. |
| 35 | M & L Rounding to edges of stones slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and as directed. |
| 36 | S & F in repairs 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 37 | M & L for 75mm PVC (SWR) pipes of Type 'B' single socketed in any length with rubber ring joints, laid in trenches or walls complete all as specified and as directed. |
| 38 | S & F PVC (SWR) bends any radius 75mm bore with access door complete all as specified and as directed. |
| 39 | S & F PVC (SWR) vent cowl 75mm bore complete all as specified and as directed. |
| 40 | S & F PVC (SWR) branch piece, single (single T) equal or unequal 75mm with access door complete all as specified and as directed. |
| 41 | M & L for 110mm PVC (SWR) pipes of type 'B' single socketed in any length with rubber ring joints, laid in trenches or walls complete all as specified and as directed. |
| 42 | S & F PVC (SWR) bends any radius 110mm bore with access door complete all as specified and as directed. |
| 43 | S & F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 44 | S & F PVC (SWR) branch piece, single (single T) equal or unequal 110mm with access door complete all as specified and as directed. |
| 45 | S & F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. including 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms) complete all as specified and as directed including dismantling of existing water old water tank and credit offer to contractor. |
| 46 | S & F of 25mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed complete all as specified and as directed.(Minimum weight 25mm-455gms) |
| 47 | S & F 25 mm bore gun metal globe or gate, valves with iron screwed both ends for iron pipe & fixed complete all as specified and as directed. |
| 48 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) |
| 49 | M & L Mild steel TMT bars of 6mm to 8mm dia and over of grade Fe 500, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed. |
| 50 | M & L providing precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs, shelves and set in cement mortar 1:4 with joints to match complete all as specified and as directed. |
| 51 | M & L for Reinforced cement concrete (Nominal mix) of Type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported by walls complete all as specified and as directed. |
| 52 | M & L Use and waste formwork to soffits of suspended slabs such as roof slabs, landings, rough finished surfaces of concrete flat complete all as specified and as directed. |
| 53 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.5sqm each complete all as specified and as directed. |
| 54 | Taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sqm but n.exc 4sqm each |
| 55 | S & F for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed complete all as specified and as directed. |
| 56 | S & F Second class hardwood rail and style 35mm thick, Factory Made shutters Plain framed (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering rail and stile as per IS: 1003 (Part I), kiln seasoned and supplied and fitted to chowkats complete all as specified and as directed. |
| 57 | S & F Second class hardwood 35 mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed. |
| 58 | S & F in stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 59 | S & F FI Hold fast Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 60 | Preparing surfaces of treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n.exc 0.1 sqm each complete all as specified and as directed. |
| 61 | S & F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 62 | S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30mm thick with wood free EPS (stiles) with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face. supplying & fixing in frame at site as per manufacturers instructions |
| 63 | Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9mm), made of (small series) frame 47 x 50mm & sash 47 x 68mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed.(Glass shall be paid separately)Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 64 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 ± 0.2mm and single glazing bead of appropriate dimension (Area upto 0.75sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.(Glass shall be paid separately).Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 65 | S & F Anodised aluminium deco grill of size of mesh not exc 75mm x 75mm, thickness shall approx. be 6mm, decorative type and fixed with suitable aluminium section fixed to alum frame of windows / ventilators complete all as specified and as directed. |
| 66 | M & L Figured glass, ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and as directed. |
| 67 | S & F 100mm size mild steel butt hinges, medium weight, cold rolled fixed with stainless steel screw with frame complete all as specified and as directed. |
| 68 | S & F Aluminium anodised barrel tower bolts of extruded section 200mm size complete all as specified and as directed. |
| 69 | S & F Aluminium anodised barrel tower bolts of extruded section 125mm size complete all as specified and as directed. |
| 70 | S & F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long complete all as specified and as directed. |
| 71 | S & F Extruded aluminium alloy handles, fabricated type, anodised 125mm long complete all as specified and as directed. |
| 72 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 73 | S & F stainless steel curtain rods of 25mm dia (Drapery rods) heavy duty complete all as specified and as directed. |
| 74 | S & F stainless steel brackets for 25mm dia curtain rods complete all as specified and as directed. |
| 75 | S & F stainless steel decorative finials for 25mm curtain rods complete all as specified and as directed. |
| 76 | S & F Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 77 | S & F in repairs Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination 18/19mm thick fixed with screws to timber frame work as in shelves/ cupboard shutters and partitions complete all as specified and as directed. |
| 78 | M & L 2nd class hardwood exc 13 and n.exc 25sqm Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed. |
| 79 | M & L 6mm thick teak wood lipping for external of 18/19 thickness of board complete all as specified and as directed. |
| 80 | S & F 30mm continuous (piano hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed. |
| 81 | S & F for 75mm Rim latch with two levers, of mild steel body. stove enamelled finish with brass knob or lever and handle fixed complete all as specified and as directed. |
| 82 | Taking down cement or cement lime plaster, on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water, etc., any description complete all as specified and as directed. |
| 83 | M & L rendering 15mm thick on other than fair faces of brick work or concrete surfaces of wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 84 | M & L Rendering 15mm thick in CM 1:4 on wall mixed with water proofing compound as per manufacturers instruction, finished plastered surface even and smooth without using extra cement. Note:- WPC will be measured and paid separately. |
| 85 | M & L rendering 10mm thick on fair faces of concrete surfaces of ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 86 | Complete removal of existing treatment washing, rubbing down and stopping of white wash/colour wash/ cement base paint/ distempered any description on wall surfaces complete all as specified and as directed. |
| 87 | M & L applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty to internal wall surfaces complete all as specified and as directed. |
| 88 | M & L applying two coats of exterior emulsion weather proof paint over two coat of external wall primer complete all as specified and as directed. |
| 89 | M & L preparing newly plastered surfaces of ceilings and applying three coat of white wash to match with the existing surfaces complete all as specified and as directed. |
| 90 | M & L preparing newly plastered surfaces of walls and applying two coats of Oil bound distemper on untreated plastered surfaces of walls over a coat of wall putty and primer including necessary preparation of surfaces complete all as specified and as directed. |
| 91 | M & L preparing newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint on untreated plastered surfaces of walls over a coat of putty and primer including necessary preparation of surfaces complete all as specified and as directed. |
| 92 | Preparing of old ceilings surfaces and applying one coats of white wash to match with the existing surfaces complete all as specified and as directed. |
| 93 | M & L painting new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed. |
| 94 | Removing the existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sqm complete all as specified and as directed remove all the debris from site and rubbish off the premises complete |
| 95 | M & L 25mm average thick, PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in levelling course over the roof slab complete all as specified and as directed. |
| 96 | M & L 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra complete all as specified and as directed.Note:- WPC shall be measured and paid separately. |
| 97 | Supply only integral Liquid water proofing compound |
| 98 | M & L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.80 kg/sqm reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per sqm, and a bonding bitumen of VG-10 at 1.20 kg/sqm torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint @ 0.10 litre/sqm over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work.Note:- The work shall be carried out by authorized applicators of manufacturers |
| 99 | Demolition brick work built in cement mortar including all quoins, arches Pillars etc., complete all as specified and as directed. |
| 100 | Demolition of cement concrete in any position and in description not otherwise provided for complete all as specified and as directed. |
| 101 | M & L plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in water tank staging, etc. complete all as specified and as directed. |
| 102 | M & L Brick work with fly ash bricks old size straight or curved on plan exc 6 mean radius, built in cm 1:4 complete all as specified and as directed. |
| 103 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed. |
| 104 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and n.exc 10Sqm on plan and getting out in hard/dense soil as in foundation for footings/ walls complete all as specified and as directed. |
| 105 | Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm in hard/dense soil complete all as specified and as directed. |
| 106 | Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 107 | Spreading and levelling in layers n.exc 25cm thick and well ramming including watering as required complete all as specified and as directed. |
| 108 | M & L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks complete all as specified and as directed. |
| 109 | M & L for 100mm thick PCC 1:4:8, type D-2 as in sub base complete all as specified and as directed. |
| 110 | M & L for cement concrete type B-2, 1:2:4 (40mm graded aggregate) of 100mm thick in floor cement concrete surface even and smooth without using extra cement in alternate panel complete all as specified and as directed. |
| 111 | Forming contraction joint (Dummy) 65mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and as directed. |
| 112 | M & L for Brick work with old size fly ash bricks straight or curved on plan n.exc 6m mean radius built in CM 1;6 complete all as specified and as directed. |
| 113 | M & L for rendering 15mm thick in CM 1: 4 and finishing the surface even and smooth complete all as specified and as directed. |
| 114 | M & L for two coats of cement base paint on wall surface including preparation of new surface complete all as specified and as directed. |
| 115 | M & LTMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) complete all as specified and as directed. |
| 116 | M & L Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in lime or mud mortar; not previously plastered; and scrubbing down with water etc., to receive plaster complete all as specified and as directed. |
| 117 | M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded granite/trap stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. |
| 118 | M & L for Plain cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in coping including necessary form work complete all as specified and as directed. |
| 119 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 120 | Material & Labour for Wiring complete with 1.5 sqmm single core FRLSH PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories or casing capping's including accessories fixed on wall / ceiling or concealed on wall, making good disturbed surfaces of walls and fixed on ceiling etc. with suitable clamps, screws, etc., or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc., including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :- |
| 121 | One light point controlled by one switch |
| 122 | One fan point controlled by one switch |
| 123 | One Exhaust fan point controlled by one switch |
| 124 | One 3 pin 5 amps switch socket on same board along with other switches. |
| 125 | One 3 pin 5 Amps switch socket on independent board |
| 126 | One bell point controlled by bell push switch on independent board. |
| 127 | All as per item No.120 here in before but with 4 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board complete all as specified and as directed. |
| 128 | Taking down sub main wiring (or) power wiring complete upto 2 runs of 10 Sqmm in PVC conduit removing to stores or taken as credit and making good the disturbed surfaces of wall, etc. complete all as specified and as directed. |
| 129 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 10 sqmm including one run of 10 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25mm dia rigid PVC conduit and conduit accessories or casing capping including accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv complete all as specified and as directed. |
| 130 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories including accessories fixed on wall/ceiling etc., or concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly complete all as specified and as directed. |
| 131 | S & F in repairs Ceiling rose surface Bakelite 65mm x 50 mm two to three terminals complete all as specified and as directed. |
| 132 | S & F in repairs Modular Switch flush DIRECT TO FIT press type 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 133 | S & F in repairs Modular Switch flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 134 | S & F in repairs Modular Socket flush DIRECT TO FIT press type 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 135 | S & F in repairs Modular Socket flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 136 | S & F in repairs Modular Fan step regulator, 120W - 1 module for ceiling Fan of 1200 mm sweep complete all as specified and as directed. |
| 137 | S & F in repairs Modular white cover with plate with frame 2 module including flush box matching with white cement work if necessary complete all as specified and as directed. |
| 138 | S & F in repairs Modular white cover with plate with frame 3 module including flush box matching with white cement work if necessary complete all as specified and as directed. |
| 139 | S & F in repairs Modular white cover with plate with frame 6 module including flush box matching with white cement work if necessary complete all as specified and as directed. |
| 140 | S & F in repairs Modular white cover with plate with frame 8 module including flush box matching with white cement work if necessary complete all as specified and as directed. |
| 141 | S & F 30W bldg security light fitting including suitable GI bracket and clamps nuts etc. with best in class design and robust heat sink along with class leading IP, and surge protections for long lasting performance including taking down old unsv light fitting complete all as specified and as directed. |
| 142 | S & F replacement of modular clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps complete all as specified and as directed. |
| 143 | S & F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 6 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed. |
| 144 | S & F in repairs MCB DP, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and as directed. |
| 145 | S & F in repairs MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and as directed. |
| 146 | S & F in repairs 40W LED aluminium battens high wattage decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed. |
| 147 | S & F in repairs 10W LED battens decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient complete all as specified and as directed. |
| 148 | Taking down old ceiling fan/ Exhaust fan and kept in MES store where as directed. |
| 149 | S & F in repairs/ replacement exhaust fan made of steel complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed. |
| 150 | S & F in repairs/ replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete all as specified and as directed. |
| 151 | S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep 3 Star rating complete all as specified and as directed. |
| 152 | S & F electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat NRV, connection piece etc. complete all as specified and as directed. |
| 153 | Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No.3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B-1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100mm centre to centre both ways and MS 6 mm dia hook complete all as specified and as directed. Please Enable Macros to View BoQ information |
