|
| 1 | Earth work in all kind of soil for exacavation of foundation trench,with in 50m. Initial lead |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost, conveyance, |
| 3 | Cement concrete (1:4:8)with 4cm size hard granite metal per 1cum |
| 4 | Brick work with Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm size having crushing strength not less than |
| 5 | Super structure |
| 6 | RCC M-20 works with hoisting,laying,cost, conveyance royality & taxes of all materials |
| 7 | Rigid smooth centering and shuttering for casting including cost of all labour and materials etc. complete. |
| 8 | b) RCC Beam & Coloumn etc. |
| 9 | c) Lintel & Roof Beam etc. |
| 10 | d) RCC Slab & Chajjas-. |
| 11 | e) RCC Stairs excluding landing but including ralling-. |
| 12 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per |
| 13 | 2.5 cm. Damp proof course with C.C. (1:2:4) using 12mm. Size hard broken granite Chips |
| 14 | 16mm thick cement plaster in C.M(1:6) over Brick masonary including cost,conveyance, |
| 15 | 12mm thick cement plaster in C.M(1:6) over Brick masonary including cost,conveyance, |
| 16 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand ) and filling joints with white cement of approved quality including cost |
| 17 | Supplying fitting & Fixing of MS Grills- Placing in position etc all complete. |
| 18 | Fixing ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 glazed tiles- 20cm x 20cm size in dados striking and rises of steps on 12mm cement plaster ( 1:3 ) jointed with neat cement slury mixed with pigment to match |
| 19 | Finishing surface of walls with Cement based wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 20 | Wall painting 2 coat with plastic emulsion paint of approved shade on old work to give an even shade Inculding cost of paint. T&P etc complete. |
| 21 | Wall painting 2 coats with Weather Coat paint of approved shade on new work to give an even shade Inculding cost of paint…etc/Compl. |
| 22 | Priming 1 coat with any appproved Primer including all cost etc complete. |
| 23 | Painting 2 coat with any appproved paint on new wood work and Steel work including all cost etc complete. |
| 24 | Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No.4660 and the frame to be completed by means of jointi |
| 25 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778, as windows frame section No. 4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as panel fitted arrangement including all fitting including cost of materials all taxes labour, T&P including cost of glass etc.complete as per direction of Engineer-in-charge. |
| 26 | Supplying all materials, labour and T&P etc. and laying in trenches and jointing galvanised mild steel! tubes (medium grade) from standard manufacturers approved by the Deptt. conforming to 1.S: 1239 (part-I) of the following nominal bore with required heavy grade tube fittings with socketand screw joints including cutting thread to pipes to required length including wastages, supply of wooden pegs, nails, G.I, clamps, necessary offsets or fixing to the walls with hokier bolts and wooden plugs etc providing lights barriers and pegs etc. and testing as per PH specification and direction of the Engineer-in-charge, all complete |
| 27 | Supplying all materials, labour and T&P etc and foxing of 1SE marked polyethylene roto moulded cylindrical vertical water storage tank confirming to 1.S. 12701 / 1996 from reputed manufacturers ( Sintex / Mahanadi / Mangalam - 3 layer ) approved by the Deptt, of following capacity including cutting hole and connection of riser pipe and distribution pipe and tank nipple, checknut etc. upto height of S Mt., encircling by 100mm thick filling sand and 125mm thick C.B. Brick masonry in cement mortar (14) with 12mm thick cement plaster (t.4) up to full height of tank etc. as per P.H specification and direction of the Engineer-in-charge, all complete |
| 28 | Supplying all materials, labour and T&P etc. and providing and fixing to wall or ceiling and floor and jointing galvanised mild steel tubes (medium grade) from standard manufacturers approved by the Deptt. conforming to IS ; 1239 (part-1) of the following nominal bore and required heavy grade tube fittings with socket and screw joints including cutting thread to pipes to required length including wastages, supply of wooden pags, nails, G.I. lamps, necessary offsets or foxing to the walls with holder bolts and wooden plugs etc. providing lights barriers and pegs etc. and testing as per PH specification and direction of the Engineer in-charge, all complete. |
| 29 | b) 20 mm dis. G.t, pipe - Medium Grade (internel) |
| 30 | c) 15 mm dia. Gl. pipe - Medium Grade (internel) |
| 31 | Supplying all all materials, labour and T & P etc. and cutting groove for taking G.I. pipe by chiselling in brick masonry wall for foxing pipes of following nominal size & fittings including mending good the damages with brick work in cement mortar (1:3)including plastering etc. as per PH specification and as directed by the Engineer-in-charge, all complete. |
| 32 | Supplying all all materials, labour and T & P etc. and cutting groove for taking G.I. pipe by chiselling in brick masonry wall for foxing pipes of following nominal size & fittings including mending good the damages with brick work in cement mortar (1:3)including plastering etc. as per PH specification and as directed by the Engineer-in-charge, all complete. |
| 33 | Supplying all materials, labour and T&P etc. and fitting and fding of eartherware fat back Wash land Basin in white vitreous china, 12mm combined style tap with single inlet narle for pillar taps icluding supplying C.I. or M.S. Bracket painted white and 32mm dia. waste pipe of 900mm long and 12mm connection pipe with plumbing joint, C.P, screws and wooden plugs, jointing cement etc. as per specification and direction of the Engineer-in-charge, all complete. |
| 34 | Supplying all materials, labour and T & P etc. and fixing of water supply specials ofthe following nominal size as per PH specification and as directed by the Engineer-in-charge, all complete. |
| 35 | b) 15mmdia. CP Brass Pilar Cock |
| 36 | c) 25 mm dia. Gun Meta/Brass Fultwy Valve fittings |
| 37 | Supplying all materials, labour and T& P etc. and fixing C.P I PVC floor traps of the following nominal diameter of outlet and inlet of self leaning design with sand cast ron screwed down or hinged grating with or without vent arm complete including cutting and making good the damages to walls and floors etc. as per PH specification and as directed by the Engineer-in-charge, all complete. |
| 38 | Supplying all materials, labour and T & P etc. and fixing of Chromium Plated / Brass Shower Rose as per PH specification and as directed by the Engineer-in-charge, all complete |
| 39 | Supplying all materials, labour and T & P etc. and fixing standard size C.P. Brass towel rail / ring complete with C.P Bracket fixed to wooden plugs with CP screw etc. as per PH specification and as directed by the Engineer-in-charge, all complete |
| 40 | Supplying all materials, labour and T & P etc. and fixing of 600mm x 450mm size wal mirror of superior glass (Belgium quality) mounted on 6mm thick AC sheet or ply wood sheet as per PH specification and as directed by the Engineer-incharge, all complete. |
| 41 | Supplying all materials, labour and T& P etc. and fixing water closet, squatting pen (Orissa pattern I.W.C. pan ) duly embeded in cement concrete ( 1:4:8 ) using 40mm size hard granite metal as per PH specification and as directed by the Engineer-in-charge, all complete. |
| 42 | Supplying all materials, labour and T & P etc. and fixing 109mm size 'P or 'S' trap (with or without horn) for water closet squating pan including jointing the trap with pan in cement mortar (1:1)as per PH specification and as directed by the Engineer-in-charge, all complete. |
| 43 | Supplying all materials, labour and T&P etc. and fixing 10Litres capacity low level PVC flushing Cistern of standard manufacturers approved by the Deptt. complete with all fittings slike syphonic arrangement, 15mm nominal size Brass / PVC Ball valve with polythene float, handle, unions and couplings for connection with inlet, outlet and overflow pipes, 40mm dis. fush bend, 12mm dia. PVC inlet connection pipe including cutting holes and making good the damages and connecting the flush bend with supply main etc. as per specification and direction of the Engineer-incharge, all complete |
| 44 | Supplying all materials, labour and T&P etc. and fixing sanitary installations of following nominal size for Wash Hand Basin and Sink of approved specification and direction of the Engineer-in-charge, all complete |
| 45 | b) 12mm dia. Long Bend Connection Pipe |
| 46 | c) Brass Waste Coupling -- full thread |
| 47 | Supplying all materials, labour nd T&P etc. and constructing brick masonry septic tank for 10 users' of inside 2OOOmm x 90Omm x 1400mm excluding 300mm free board and inspection pit of 450mmn x 450mm x 450mm size by providing 150mm cement concrete (1.36) on bed using 40mm size hard granite metal, 2S0mm thick C.B. brick wall in cement mortar (1:4) with a baffel wall of 125mm thick up to 750mm height with inside cement plaster (1:4) and A.S, flooring with cement concrete (1:2:4), M-20 RCC cover slab of 75mm thick using 12mm size crusher broken hard granite chips and reinforcement@ 5lbs / cft. of concrete, cement plastering (1:3) including punning inside and cement painting outside including earthwork in excavation in all kinds of soil, refilling the cavities as per approved design an PH specification and diredion of the Engineer-in-charge, all complete |
| 48 | Supplying all materials, labour and T&P etc. and constructing brick masonry soak way pit of 1220mm inner dia. x 2550mm deep with 100mm perforated cement concrete (1:3:6) on bed using 40mm size hard grantte metal, 250mm thick C.B. brick perforated wall in cement mortar (1:4) up to 2150mm from bed and remaining in solid brick wall in cement mortar (1:4), M-20 RCC cover slab of 75mm thick using 12mm size crusher broken hard granite chips and reinforcement @5lbs/Cft. of concrete, cement plaster (1:4) including punning and cement painting outside including earthwork in excavation in all kinds of soil, refiling the cavities, providing Iron rings and fling the soak pit full with C.B. brick khoas, sand etc as per approved design and P.H. specification and direction of the Engineer-in-charge, all complete |
| 49 | Supplying all materials, labour and T&P etc. and laying in trenches unplasticised PVC pipes conforming to 1 S 4985 Class-2 ( 6 kgt / Sqcm ) cow, all types of bends andspecials, floor trap etc, o the following nominal bore and tube fittings including supply of wooden pegs, nails etc as per PH. specification and direction of the Engineer-in-charge, all complete. |
| 50 | b) 110mm dia. x 90° VE Plain Bend |
| 51 | c) 110mm dia. PVC Tee with Door |
| 52 | d) 110mm dia. PVC Socket |
| 53 | e) 110mm dia. PVC Cowl |
| 54 | Recessed wiring to light point / fan point /exhaust fan point /call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metal PNC flexible conduit with 5 Amp, 250 V piano type switch SI marked and ceiling rose ISl marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex IL&T I Anchor I Haveils / V Guard ), complete with all accessories and connections and as per directions of Engineer-in-charge, all complete |
| 55 | b) Medium Point - 3 Mtr. to 6 Mtr. |
| 56 | c) Large Point - Above 6 Mtr |
| 57 | Recessed wiring to submain in 2 x 25 sq.mm FR PVC insulated single core multistrand copper conductor of ISl marked confirming to IS-894/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1. 5 sq.mm FR PVC insulated single core multistrand Copper conductor as earth wire as required. (Make of wire Finolex/ L&T/Achor/Havel/V Guard) complete with all accessories and connections, all complete |
| 58 | Recessed wiring to submain In 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-894/1990 in 20 mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required, (Make of wire FinolexdL&T/Anchor/Havels/V Guard) complete with all accessories and connections, all complete. |
| 59 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulted single core multistrand copper conductor of ISL marked confirming to 1S.-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PNC insulated single core muttistrand copper conductor as earth wire as required. (Make of wire Finolex /L&T/Anchor/Havels/V Guard) complete with all accessories and connections, all complete |
| 60 | Supplying all materials, labour and T&P etc. and foxing of 3 pin d Amp. 250V, flush type socket and 5 Amp 250V, flush type switch of above specification on existing board |
| 61 | Supplying all materials, labour and T&P etc., and fixing of 32A, 240Volt ICDP / MCDp TPN switch dlsconnector (panel mounted type), main switch with single fuse unit and neutral bar mounted on porcelain base, confirming to I S , 13947 ( Part - III)/ 1993 t0 be fixed on 250mm x 200mm, M.S box and hard wooden board complete with all accessories and connections and as per direction of Engineer-in-charge, all complete. |
| 62 | Concealed surface wiring to fan point in 20mm dia. rigid PVC conduit heavy duty of ISL marked conforming to IS : 9537 / 1983 ( Part-IIl ) with 1.55 Samm, PVC insulated PVC sheathed single core Copper wire with metallic switchboard of sire 250mm x 200mm x 62mm made of 1.22mm M.S. sheet one oat of red oxide and two coats of grey enamel paint conforming to I S ; 5133 ( Part-I) 1 1909 with 3mm thick bakelite / phenolic laminated front cover fixed with steel screws including supply and fixing of 5Amp. 250V fush type switch of ISI marked confirming to IS ; 3854 / 1997 and ceiling rose of St marked confrming to IS; 371 / 1999 mounted on C.I. Circular box having front bakelite cover complete with all accessories and connections, al complete. |
| 63 | Supply and foxing of 2 G Amp. Main Circuit Breaker for 2 way B.D.B. Amp. per way compete with all accessories and connections including supply and fixing of metallic board ofsize 150mm x 225mm x 75mm including all accessories and connections etc. complete. |
| 64 | Supplying all materials labour and T&P etc., for supply and fixing of Superior type C.I. Bulk hod fitting heavy duty 1Sl marked square / conical type with Pre-metallic glass coverprovided with galvanized steel wire guard including necessary connections and as per direction of Engineer-in-charge, all complete. |
| 65 | Supplying all materials labour and T&P etc. for fixing of bakelite BK angle holder I batten holder of & marked confirming to IS : 1258 / 1987 without bulb including all connections and as per direction of Engineer-in-charge. |
| 66 | Supplying and fitting of 48\\" A.C. celling fan from reputed manufacturers like Phillips / Bajaj / Crompton Greaves as approved by the Engineer-in-charge, all complete |
| 67 | Supplying and Installation, testing end commissioning of exhaust fan up t 460 men sweep in the existing opening, including making the hole to suit the size ot the above fan,making good the damnage complete, connection, etc as required including supplying fans from reputed manufacturers as approved by the Engineer-in-charge, all complete |
| 68 | Supplying all materials labour and T&P etc. and fitting of 4'x40w, single pattl type tube light fttinge from reputed manufacturers like Philips / Bajaj / Crompton Greaves as approved by the Engineer-in-charge, all complete |
| 69 | SF of standard earthing conforming to 1.$ : 3043 4 1987 including supply and fixing of 38mm 1 40mm dia heavy duty G.4, pipe 3000mm. long conforming to 1$ :1239 ( Part-1 ) 4 1990. The pipe shall have 12mm dia perforated holes at 150mm interval center to center up to 2500mm. height from the bottom, upper end threaded and fitted with 38mm / 40mm dis G.I, flange with provision of holes for making connection of earth pit chamber and SIF of C.I. hinged top cover 300rm x 300mm 10mm size. Excavation of earth pit of size 750mm 750mmn x 300Orm. The earth pit shall have an alternate layer of 105mm charcoal and S0mm salt at 150mm radius around earth electrode up to a depth of 465mmn from the bottom and the rest shall be filled with homogeneous layer of salt, sand and charocoal to a further depth of 2035mm and balance portion by surplus earth No. 8 8WG/4.88 mm dia G.I. wire, run inside the wall at a depth of 50mm by cutting portion of wall surface and plaster the cutting portion of wall after laying the wire as earth continuity conductor from main switch to earth electrode, both end of the earth wire should be provided with Copper Cable socket duly soldered and fixed by G.I. Nut and bolts, all complete Please Enable Macros to View BoQ information |
