|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed. |
| 2 | S & F for Pre- painted galvaniume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling timber scantling 40 Sq cm and over in section in any position in unframed work complete all as specified and directed. |
| 5 | M & L second class soft wood in scantling clean swan complete all as specified and directed. |
| 6 | Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed. |
| 7 | Taking down chowkat with shutters n. exc.1.5Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed. |
| 8 | S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified. |
| 9 | S & F plain framed, panelled shutters 35 mm thick 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides of veneered particle board med density, wood particle board with commercial face fitted to chowkhat complete all as specified and directed. |
| 10 | S & F glazed & skeleton shutters 30 mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.20 (a) fitted to chowkhats but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified and directed. |
| 11 | Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation board /slab/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 12 | M&L plywood grade BWR type BB, 12 mm thick fixed with nails to timber frame work in ceiling complete all as specified and directed. |
| 13 | M & L Plain fillets of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured nails complete all as specified and directed. |
| 14 | M&L for applying two coat of synthetic enamel paint over one coat of pink primer on new plywood surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed. |
| 15 | S&F 3 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 16 | S&F for MS barrel tower bolt, stove enamelled black, with bright bolt of 100mm long complete all as specified and directed. |
| 17 | All as per item No 16 above but 150mm long. |
| 18 | S&F for MS Sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia of 250mm long. |
| 19 | S&F for MS butt hinges med. Weight, cold rolled 100mm long. |
| 20 | All as per item No 19 above but 75mm long. |
| 21 | M & L for mild steel pressed handles, oval type, stove enamelled black of 100mm long All as per item No 16 above |
| 22 | All as per item No 16 above but 150 mm long. |
| 23 | Dismantling floor hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified and directed. |
| 24 | M & L for 75mm thick plain cement concrete 1:4;8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as specified and directed. |
| 25 | M & L for 25 mm thick plain cement concrete 1:2:4 type Bo (using 12.50 mm graded crushed stone aggregate) as in sub base or floor complete all as specified and directed. |
| 26 | M&L machine cut Kota stone flooring 20-25mm thick over 20mm thick cement screed (1: 6) base laid and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 27 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with 10mm thick rendering in Cement Mortar 1:4 complete all as specified & directed. |
| 28 | M & L for Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in Cement Mortar 1:6 as specified |
| 29 | M & L for Glazed ceramic coloured tiles (450 x 300 x7mm) thick, as in vertical surface such as in skirting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over 10mm thick rendering in Cement mortar 1:4 complete all as specified & directed. |
| 30 | Demolition of cement concrete (unreinforced) in ground floors and paving’s n exc. 15cm thick below or above ground level) complete all as specified and directed. |
| 31 | M & L for 75 mm cement concrete PCC 1:3:6 Type C 1 (using 20 mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 32 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 33 | M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 34 | M & L for 10 mm thick rendering in Cement Mortar 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement including taking down cement or cement plaster form brick or stone walls complete all as specified and directed. |
| 35 | M & L for 15mm thick rendering in Cement Mortar 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster from brick or stone walls, complete all as specified and directed. |
| 36 | M & L for applying two coats of cement base paint over a coat of on new plastered surfaces complete all as specified and directed. |
| 37 | M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper complete all as specified and directed. |
| 38 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 39 | M&L for factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 40 | M&L for solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 41 | S & F for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe including of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. |
| 42 | S & F in repair Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 43 | Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified and directed. |
| 44 | S&F in repairs vitreous China squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and directed. |
| 45 | S&F in repairs PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr capacity white with flush pipe & all fitting complete all as specified and directed. |
| 46 | S&F in repairs fancy type Bib taps cast copper alloy, chromium plated, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed. |
| 47 | S&F in repairs pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed. |
| 48 | S&F in repair stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe, complete all as specified and directed. |
| 49 | S&F in repairs two way angular stop cock chromium plated 15mm dia complete all as specified and directed. |
| 50 | S&F in repair ball valves, high pressure, with polythene float and flynut complete, 20mm bore complete all as specified and directed. |
| 51 | S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and directed. |
| 52 | S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I. |
| 53 | S&F in repair PVC connection 15 mm length 450 mm fixed complete all as specified and directed. |
| 54 | Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 55 | Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 56 | S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 57 | S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 58 | S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. |
| 59 | S&F in repair lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 alongwith chicken mesh wire netting 25 gauge, 20 mm mesh complete all as specified and directed. |
| 60 | All as per item No 59 above but 20mm bore pipe |
| 61 | Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed. |
| 62 | S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall (PVC Pipe 2kg/sqcm, thickness 1.8mm to 3.8 mm) complete all as specified and directed. |
| 63 | S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall & Floor (PVC Pipe 2kg/sqcm, thickness 1.8mm to 3.8 mm) complete all as specified and directed. |
| 64 | S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed. |
| 65 | M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. |
| 66 | M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed. |
| 67 | M&L for PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 68 | S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 69 | M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed. |
| 70 | S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed. |
| 71 | S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 72 | M&L for preparation of New steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on new surfaces over a one coat of Primer complete all as specified and as directed. |
| 73 | S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 74 | Dismantling boarding, any description, fixed in any position with Screws complete all as specified and directed. |
| 75 | S&F Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm lap complete all as specified and directed. |
| 76 | M&L 2nd class soft wood “khatambandh” (Kashmiri Art) in ceiling/wall over 12mm thick BWR plywood and scantling framework including cornices and beading as required and applying three coats of polish after preparation of the surface, complete all as specified and directed. |
| 77 | M&L for 10 to 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall panelling including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of surface, complete all as specified and directed. Note : Frame work shall be measured and paid separately. |
| 78 | M&L for chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over and including 15 mm thick screed bed of cement mortar 1:4 complete all as specified and directed. |
| 79 | M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) dark shade polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 80 | S&F in repairs one piece vitreous China wash down water closed pan (pedestal pattern) Including integrated flush tank white or coloured including p or s trap etc complete all as specified and directed. |
| 81 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedding and pointed in any mortar complete all as specified and directed. |
| 82 | M & L for Granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. |
| 83 | M & L for plinth protection 50 mm thick in PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 84 | S&F 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part -I, including dismantling of old unserviceable tank complete all as specified and directed. |
| 85 | M&L for preparation of old painted surfaces and applying two coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and directed. |
| 87 | S&F towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 88 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 89 | S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 90 | S & F in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed. |
| 91 | S & F in repair towel rail 450mm long of PTMT fixed with and including Chromium plated brass sand screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed. |
| 92 | S & F in repair toilet paper holder with flat recessed type stainless steel chromium plated complete all as specified and directed. |
| 93 | S & F Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 94 | S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed. |
| 95 | Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed. |
| 96 | Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 97 | Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed |
| 98 | M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping/ PVC Conduit of suitable size (as per site requirement) including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, modular metal flush boxes (metal switch board of any type and size) with modular metal frame plate and white cover for housing switch required on site, including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed. |
| 99 | All as per item No 98 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board. |
| 100 | All as per item No 98 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board. |
| 101 | All as per item No 98 herein before but wiring with 2.5 sqmm copper wire (FR-LS-H) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 102 | S&F modular switch one way 5 amps complete all as specified and directed. |
| 103 | S& F modular Socket outlet 3 pin, 6A, flush type complete all as specified and directed. |
| 104 | S & F modular switch socket combination 2 in 1,5A, flush type complete all as specified and directed. |
| 105 | S & F modular switch socket combination 5 pin 16A, flush type complete all as specified and directed. |
| 106 | S&F in repair 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 107 | Supply and fixing in replacement of round shape 6 watt 220 volts AC recessed type/ Warm type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 108 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 109 | Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 110 | Supply and fixing in replacement of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 111 | Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 112 | Supply and fix in repair ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 113 | S & F in repair distribution boards VTPN, 4 way, double door 415 volts 50 Hz ,AC including fixing on suitable rectangular block complete all as specified and directed. |
| 114 | S & F in repair MCCB ,100 Amp, 4 Pole breaking capacity 16KA, 415 Volt, 50 Hz with sheet metal enclosure complete all as specified and directed. |
| 115 | S&F in repair distribution board single pole & neutral with 200 Amps rated bus bar for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 12 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/ accessories etc complete all as specified and directed. |
| 116 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' curve series, complete all as specified and directed. |
| 117 | S & F in repair MCB SPN, 240 volt,32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 118 | M & L Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x4 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed. |
| 119 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc, complete all as specified and directed. |
| 120 | Supply, Laying, jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade, cross section area 25 Sqmm 3.5 core complete laid in trenches, ducts or fix to pipe, on walls, poles complete all as specified and directed. |
| 121 | M & L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion with earth work, complete all as specified and directed. |
| 122 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 123 | S&F Socket outlet 2 in 1, 3 pin, 5A, flush type complete all as specified and directed. |
| 124 | S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed. |
| 125 | S & F switch socket combination 2 in 1, 3 pin, 5 and15 Amp flush type universal complete all as specified and directed. |
| 126 | S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 127 | M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. |
| 128 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 129 | S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for single door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 6/8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 130 | M & L for wiring for circuit/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire complete all as specified and directed. |
| 131 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections complete all as specified and directed. |
| 132 | Supply and installation and testing of Hot, Cold and normal Water Dispenser with refrigerator including all accessories and bottle 20 litre capacity, 230 volts, 50 hz, Refrigerant type R134a complete all as specified and as directed. Please Enable Macros to View BoQ information |
