|
| 1 | Surface excavation n. exc 30 cm deep and average 15cm deep and getting out soft/ loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundation etc in soft/loose soil all as specified. |
| 3 | M&L plain Cement concrete as in foundation, filling & mass concrete type D2 1:4:8 (using 40 mm graded aggregate complete all as specified and directed. |
| 4 | M&L for brick work with sub class 'B' brick straight or curved on plan etc 6 mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 5 | M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 6 | Returning and filling including spreading levelling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed. |
| 7 | Removal of excavated materials not exc 50cm and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed. |
| 8 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed. |
| 9 | M&L mild steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed. |
| 10 | M&L for RCC M-25 Design mix using 20 m graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 11 | M&L for RCC M-25 Design Mix using 20 mm graded stone aggregate for Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 12 | M&L for RCC M-25 design mix using 20 mm graded stone aggregate for beams, cantilevers & lintel beams etc complete all as specified and directed. |
| 13 | M&L for RCC M-25 design mix using 20 mm graded stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 14 | Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed. |
| 15 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions for Square, Circular rectangular on plan or polygonal flat rough finished surfaces of concrete complete all as specified and directed. |
| 16 | Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 17 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 18 | M&L for 15mm thick CM 1: 4 as external surfaces plastering to fair faces of bricks masonry wall surfaces and finished even & smooth including water proofing @ 2% compound complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under respective item. |
| 19 | M&L for rendering 15mm thick CM 1 : 6 as in internal Plastering to others than fair face of brick masonry walls and finished even & smooth complete all as specified and directed. |
| 20 | M & L for mild steel roof trussed (framed) purlins crane gantries rail & fastening and heavy bracket (beam tea angle channel or flat section) including distance pieces cleats etc complete all as specified and directed. |
| 21 | M & L two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth complete all as specified and directed. |
| 22 | M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 23 | M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | Supply only Integral waterproofing compound complete all as specified and as directed |
| 25 | M & L for applying two coats of cement based paint on external wall surfaces over a coat of primer including preparation newly plastered surface complete all as specified and directed. |
| 26 | M & L applying two coats of Oil bound distemper including preparation of old plastered surface of wall over 3mm call care putty complete all as specified and as directed |
| 27 | M&L for moorum/red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 28 | M&L for hardcore of broken stone or boulder gauge not exc 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed. |
| 29 | M&L for 100mm thick PCC type D-2 1:3:6 (40 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed. |
| 30 | S & F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirtings/dados etc including 15mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 31 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 32 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 15mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 33 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 34 | S&F Eaves Boarding of 20mm thick of Softwood 2nd class with nails in any situation (except flooring and skirting), Planed one side with butt joints complete all as specified and directed. |
| 35 | M & L for 18-19mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 36 | S & F continuous (piano) hinges, brass, bright finish or electrogalvanized of 40mm Width of flaps (when open) complete all as specified and as directed. |
| 37 | M&L for 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including Gl 6mm adjustable suspender of required length of any description complete all as specified and directed. Note:- The design and specification of the ceiling board to be approved by GE. |
| 38 | M & L for mild steel work as in hold fasts, wall ties and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 39 | M &L for providing, cement concrete type B-0,1:2:4 (12.5mm graded aggregate) in bed plates, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 40 | M & L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 41 | M & L for pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 42 | M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 43 | S&F 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed. |
| 44 | S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 45 | Supply and fixing steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, guard bars and painting etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 and TD-220 sheet 1/3 to 3/3 as applicable Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongry and grill as shown on drgs. (iii) Glazing, wire mesh shall be measured and paid for separately. |
| 46 | S & F 250 mm long aluminum alloy anodized sliding door (boil type) and fixing clips of sheets cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified and directed. |
| 47 | S&F pre-coated sheet type door spring, heavy type, 300 mm long including roller and roller plate complete all as specified and directed. |
| 48 | S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and directed. |
| 49 | S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed. |
| 50 | S & F Mild Steel butt hinges 75mm long medium weight complete all as specified and directed. |
| 51 | S & F 200mm long aluminum alloy, anodized barrel tower boll of extruded section complete all as specified and directed |
| 52 | S & F aluminum handles, cast type, anodized 150mm long complete all as specified and directed. |
| 53 | M & L for sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 3mm thick complete all as specified and directed. |
| 54 | S&F galvanised mild steel wire cloth 56mm nominal dia of 10.00 wire and average width of aperture 1.18mm including fixed complete all as specified and directed. |
| 55 | M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths. |
| 56 | M & L for cutting chases, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing, steps, cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting n. exc 10 cm girth complete all as specified. |
| 57 | M & L for 16mm bore 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 58 | M & L for 20mm bore 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 59 | M & L for 16mm Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed. |
| 60 | M & L for 20mm Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed. |
| 61 | S&F bib taps long body 15mm dia Chromium Plated, fancy type screwed down for iron pipe and fixed complete all as specified and as directed. |
| 62 | S & F in repair of ISI marked 15mm bore stop valve, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 63 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 64 | S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 65 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including dismantling of existing pipes complete all as specified and directed. |
| 66 | S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 67 | M & L for reinforced concrete pipes, class NP2 of bore of pipe 150 mm laid and jointed complete with collars complete all as specified and directed. |
| 68 | M & L Concrete bed to 150mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6, type C-2 complete all as specified and directed. |
| 69 | M & L for 1000 Litres rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 70 | S & F of for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 71 | S& F 15mm Gun-metal, globe or gate valves, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and directed. |
| 72 | S& F 20mm Gun-metal, globe or gate valves, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and directed. |
| 73 | M&L for cement concrete 1:3:6 type C1 (using 20mm stone aggregate as in plinth protection), 75mm thick complete all as specified and directed. |
| 74 | M & L PCC 1:3:6 type C - 2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate) complete all as specified and directed. |
| 75 | M & L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed. |
| 76 | M & L for rendering 15 mm thick in CM 1:4 on stone masonry surfaces or surfaces other than fair faces of brickwork and finishing even & smooth without using extra cement complete all as specified and directed. |
| 77 | M & L for extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 20 mm on granite or trap stone complete all as specified and directed. |
| 78 | M&L for providing 100mm thick cement concrete type B-I, 1:4:8 (40mm graded aggregate) complete all as specified and as directed. |
| 79 | M & L for sand filling under floor or in foundation including watering and consolidation complete all as specified and as directed. |
| 80 | M&L 60mm thickness, M-35 grade, machine pressed precast concrete interlocking paver glazed finished coloured block any shape and size conforming to IS 15658-2006, set and jointed with grey cement and pigment complete all as specified and as directed. |
| 81 | M & L for earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, in all kind of soil complete all as specified and directed. |
| 82 | Removing excavated material to be a distance exc 250m but not exc 500 m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 83 | Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick hylam sheet cover fixed with brass screw complete with all accessories for on light point/ Fan point controlled by one, 1-Way switch complete all as specified and directed. |
| 84 | All as per item No 83 mentioned here-in- above but one 5 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete. |
| 85 | All as per item No 83 mentioned here-in- before but 6 pin15 Amps socket outlet on independent board with 4 sq mm PVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single core for continuous earthing complete. |
| 86 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 87 | M & L for Switch socket combination 2 in 1, 3 pin, 6 Amps flush type complete all as specified and directed. |
| 88 | M & L for Switch socket combination 5 in 1, 3 pin, 6 Amp and 16 Amps flush type universal complete all as specified and directed. |
| 89 | Supply and fix water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated, complete all as specified and directed. |
| 90 | M & L for ceiling rose, PVC/Polycarbonate three terminals complete all as specified and directed. |
| 91 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 92 | S & F in replacement LED light fitting 1x9W/10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 93 | Supply & fix exhaust fans AC single phase 230/ 240 V of size 450mm sweep with louver complete all as specified and directed. |
| 94 | M & L sheet metal enclosure for DBs 8 way double door type with 200amps rated busbar SPN including necessary connection complete all as specified and directed. |
| 95 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed. |
| 96 | S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed. |
| 97 | S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension Wire one twin core flat cable of circular of size 16 sqmm . complete all as specified and directed. |
| 98 | M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary excavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and riveted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate complete as specified and as shown in electrical plate no 5 |
| 99 | S&F GI water tubing 25mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed complete all as specified and directed. |
| 100 | S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25mm complete all as specified and directed. |
| 101 | S&F Ferrule the existing main water supply pipe line 150/100/80 mm bore CI/DI/GI line for branch connection of the internal dia 20 mm Straight plain brass ferrules (or connecting screws) screwed both ends and internal dia 40 mm complete all as specified and directed.. Please Enable Macros to View BoQ information |
