|
| 1 | Dismantling, clearing away and carefully stacking materials useful for reuse for Brick/Stone Masonory in cement mortar wall under 3m ht.etc ., complete and as directed by the departmental officers. |
| 2 | Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9\\" x 4 3/8\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 3 | In Ground Floor |
| 4 | In First Floor |
| 5 | In Second Floor |
| 6 | Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9\\" x 4 3/8\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 7 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 8 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 9 | Labour and Hire Charges for Supplying and fixing 12 mm thick Ply Wood for closing the door, window opening with wooden frame including cost of country wood reeper of size 50mmx25mm, 12mm thick ply wood sheet, nails, binding wire, conveyance charges, labour charges etc., complete and as directed by the departmental officer., |
| 10 | Labour and Hire Charges for Supplying and fixing 12 mm thick ply wood for window out side Surface Covered with Mild Steel Sheet on wooden frame for closing window opening including cost of country wood reeper 50mmx25mm size, 12mm ply wood sheet, nails, binding wire, conveyance charges, labour charges etc., complete and as directed by the departmental officer., |
| 11 | Labour and Hire Charges for Supplying and fixing of wooden dais or platform to a size of 7.30mx 3.05m and height of 0.30m for stage fixed with country wood leg 100mm x 100mm x 300mm tied with country wood reeper 75 x 40mm and top covered with 18mm thick plywood with two steps etc, complete as directred by the departmental officers. |
| 12 | Labour and Hire Charges for Providing weldmesh partition for a height of 2.40m from floor level using best quality of weldmesh of size 1\\" x 1\\" - 10gauge and casurina props of 10cm to 13cm dia for vertical up to 3.50m height. and fixing 8cm to 10cm dia casurina props for Horizontal direction and strengthening properly to fixing the weld mesh with 50mm x 25mm country wood repper form 1m c/c on out sides of weldmesh frame work including horizontal ties at suitable interval using bolts and nuts etc., complete and removing the materials after the counting is over etc., complete. |
| 13 | Labour and Hire Charges for Providing weldmesh door for verandah to a size of 1.00 x 2.10m from floor level using best quality of weldmesh of size 1\\" x 1\\" - 10gauge with outer frame of 50 x 25mm country wood reeper alround and cross frame 50 x 25mm country wood frame including bolts and nuts etc., complete and removing the materials after the counting is over without damaging the building etc., complete. |
| 14 | Labour and Hire Charges for Supplying and fixing weld mesh closing for window using best quality of weld mesh of size 1''x1'' -10 gauge and using Country wood reepers 2''x1'' framed with weld mesh fixing on wall on including nails, cutting charges conveyance charges etc, compete. |
| 15 | Labour and Hire Charges for Providing steel record rack for Strong room of size 1.40m x 0.60m x 2.35m with the following specification. Each rack is provided with legs of 2.35 m height made of 50 x 50 x 6mm MS angle. The angles are cut to proper size, straightened and edges ground properly for smoothness. The cost of all materials labour charges,transport , erection,assembling,etc., complete and as directed by the departmental officers |
| 16 | Labour and Hire Charges for Providing Counter open in weld mesh baricade at counting hall centre to a size of 150mm x 150mm by using cutting machine etc., complete as directed by the departmental officer. |
| 17 | Supplying of mazdoor category - 1 labour for removing and replacing the table, chairs, drawing table,Wooden stage etc., complete. |
| 18 | Labour and Hire Charges for Supplying and fixing Back Drop Board to a size of 7.20 x 2.40m fixed with country wood frame of size 75mm x 40 mm alround and in side country wood reepers of size 75mm x 40mm fixed with 0.60m Horizontal and vertical intervels, Display board front surface covered with 19mm thick plywood including cost of country wood frame Reeper and 18mm Plywood, conveyance charges, Labour chargers etc complete. |
| 19 | Labour and Hire Charges for Supplying and fixing X type wooden Reeper of size 50mmx25mm in front of strong room door for Protecting the strong room including cutting, nailing, etc complete as directed by the departmental officer. |
| 20 | Labour and Hire Charges for Supplying and fixing wooden reeper of size 50 x 25mm for door entrance to avoid rain water below door shutter including cost of wooden reeper, conveyance charge,labour charges etc., complete. |
| 21 | Labour and Hire Charges for Supplying, fabricating and fixing in position anodised aluminium natural colour matt finish sliding windows/openable windows in all floors with gutter arrangement to drain the water made with extruded aluminium section of the sizes given below with necessary acessories such as rubber beading. best quality runner, lock, handle supplying and fixing 4mm thick plain glass including cost of all materials, labour power consumption required for fabrication, drilling holes in RCC column/ floor slab/masonry wall wherever necessary with power drills and made same to original condition after fixing etc.,complete .The aluminium sections are to be anodized with matt finish under electrically controlled condition in accoradance with ISI 1868/1962, for an average anodic film thickness of not less than 15 microns All aluminium sections and furniture fittings should be got approved by the Engineer-in-charge before use on works |
| 22 | Providing and Applying Polyurethane hybrid liquid applied GRIHA certified Waterproofing coating with flutyne protection technology, single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof having Tile or any non-porous surface applied @ 1.5 l/m2 in 2 coats to achieve 1mm DFT, having tensile strength with 45 gsm glass fibre mesh 4N/mm2 confirming to ASTM D 412; Elongation at break ≥ 300% and Crack bridging ability up to 3mm, SRI Index 106 as per ASTM E 1980-01, Water permeability @5 bar – Nil as per EN12390 - 8:2019, including surface preparation, priming the surface with single component high-performance waterborne tile primer which is suitable for non - porous surface at a rate of 0.14 L/m2 and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification. |
| 23 | Labour and Hire Charges for Providing GI Sheet Vivew Cutter arrangements around building using GI sheet and casurina vertical post 13cm to 15cm and 60cm below ground level3.00 0m above ground level and horizontal casurina post 10cm to 13cm 4tiers tied with coir rope and nails etc., complete and as directered by the departmental officers. |
| 24 | Labour and Hire Charges for Providing Special barricading arrangements over Bituminous Road using Drilling Machine and casurina poles 13cm dia 15cm dia and 60cm below ground level and 1.50m above and fixing horizontal casurina poles 10cm dia 13cm dia in 5 ties and the lowest should be 0.45m above ground level and tied with new coir ropes provided in all places and removing the same after the counting is over etc., complete. |
| 25 | Labour and Hire Charges for Providing barricading arrangements using casurina poles 13cm dia to 15cm dia and 60 cm below ground level and 1.50 m above and fixing horizontal casurina poles 10cm dia to 13cm dia in 4 ties and the lowest should be 0.45m above ground level and tied with new coir ropes provided in all places and removing the same after the counting is over etc., complete. |
| 26 | Labour and Hire Charges for Supplying and fixing ladies frishking cubical of size 5' 0\\" x 5' 0\\" using 10 to 13 cm dia casurina props for vertical to a height of 2.10m from ground level and 3 tier horizontal ties using 8 to 10 cm casurina poles and the three sides and top are covered with 12mm thick plywood and one side with covered with screen cloth using good quality non transperant materials with necessary tools and plants including labour charges etc. complete. |
| 27 | Labour and Hire Charges forSupplying and fixing of 19 mm thick plywood for Cell Stall framed with wooden reeper of size 50mm x25mm and fixed with vertical Casurina post 10 to 13 cm dia including labours charges as directed by the departmental officers etc complete. |
| 28 | Labour and Hire Charges for Providing movable barricading of 3m length using 10 Cm to 13 Cm dia Casurina poles for verticals leg 3 nos Various a height 1.50m with Horizontal members 4 nos, as Cross bracings includings nailing with new coir ropes etc. Complete including transportion and placing inposition as directed by the departmental officers etc., complete. |
| 29 | Labour and Hire Charges for Supplying and fixing of 12mm thick plywood for Postal box including labours charges as directed by the departmental officers etc complete. |
| 30 | Labour and Hire Charges for Supplying and fixing of Watch Tower including labours charges as directed by the departmental officers etc complete. |
| 31 | Labour and hire charges for providing Arabian orenmental Tent bottom covering in the ceiling mull cloth of approved quality the rate including Mild steel Pipe fixing, rope tying charges, loading and unloading conveyance and fixing charges using with necessary suppourt etc, and removing the after the function is over and as directed by the departmental officers. |
| 32 | Hire charges for Arm Chairs in the function site as the direction of departmental officers including the hire charges and the chairs will be removed after the function is over. etc complete. |
| 33 | Hire charges for Sofa in the function site as the direction of departmental officers including the hire charges and the Sofa will be removed after the function is over. etc complete. |
| 34 | Hire charges for Cushion Chair in the function site as the direction of departmental officers including the hire charges and the VVIP Chair will be removed after the function is over. etc complete. |
| 35 | Hire charge for Red Carpet on wooden dias in Counting Hall including conveyance charge,labour charges etc,complete. |
| 36 | Hire charges for Steel Table in the function site as the direction of departmental officers including the hire charges and the Steel table will be removed after the function is over. etc complete. |
| 37 | Labour and Hire Charges for Supplying and tieing of Side walls for Reception area, Political agents including labour charges and as directed by departmental officers etc complete |
| 38 | Hire charge for JCB including conveyance charge,labour charges etc,complete. |
| 39 | GST @ 18% Please Enable Macros to View BoQ information |
