|
| 1 | Charges for fixing and removing of barricading arrangements using 10 to 13 cm Casurina Props of tying 60cm below ground level fixing and 2.10m above ground level fixing and 5 to 8 cm dia Casurina Props five rows horizontally horizontally 0.45m above ground level and tying with new coir rope and removing the all materials after the counting is over. (3 days) |
| 2 | Hire charges for materials for the above item( for 3 days) |
| 3 | Hire charges for materials for the above item( for 13 days) |
| 4 | Charges for supplying, fixing and removing of barricading arrangements using 10 to 13 mm dia Casurina Props 3.30m height vertically @ 75cm c/c and tied horizontally with same casurina props 5 rows tying with new coir rope and removing the same after counting is over. (16 days) |
| 5 | Hire charges for materials for the above item( for 16 days) |
| 6 | Hire Charges for movable steel barricading in size 2.40m length 1.50m height including cost of labour for shifting and arrangements, conveyance charges and removing the all materials after the counting is over etc., complete as per standard specifications. (for 16 days) |
| 7 | Hire charges for materials for the above item( for 16 days) |
| 8 | Charges for Supplying, erection and removing for G.I Temporary Shed using Casurina props vertically and tied horizontally at top for purlins and fixing GI sheet above the purlins etc., complete complying with standard specifications. |
| 9 | Hire charges for materials for the above item(3days) |
| 10 | Hire charges for materials for the above item( for 16days) |
| 11 | Hire charges for materials for the above item( for 16 days) |
| 12 | Charges for Supplying, erection and removing View Cutter arrangements using Temporary GI sheet and Casurina props vertically and tied Horizontally at top for Purlins and fixing GI sheet above the purlins etc., complete complying with standard specification. |
| 13 | Hire charges for materials for the above item( for 16 days) |
| 14 | Charges for Supplying, fixing & Removing of Galvanised Iron Sheet of 18 gauge thickness and fixing properly by using country wood reepers of size 5cm x 2.5cm and nails etc ., complete complying with standard specification and as directed by the departmental officers |
| 15 | Hire charges for materials for the above item( for 16 days) |
| 16 | Charges for supplying,fixing and removing of providing Partition wall using 100mm x 75mm Country wood Reepers for Vertical supports and 50mmx25mm reeper for horizontal tie and with 12mm thick commercial Plywood etc complete complying with standard specification ( 16 days) |
| 17 | Hire charges for materials for the above item( for 16 days) |
| 18 | Charges for supplying,fixing and removing of 12mm thick water proof plywood sheet of approved make and quality and fixing properly by using country wood reepers of size 5cm x 2.5cm and nails etc ., complete complying with standard specification and as directed by the departmental officers ( 16 days) |
| 19 | Hire charges for materials for the above item( for 16 days) |
| 20 | Supplying and fixing of cross bars for doors with M.S Steel flats including fabrication, welding charges, transportion charges and removing the same after the counting is over and hire charges for 60 days (16 days) etc., complete as directed by departmental officers. |
| 21 | Charges for fixing and removing of barricading arrangements using 10 to 13 cm Casurina Props of tying 60cm below ground level fixing and 2.10m above ground level fixing and 5 to 8 cm dia Casurina Props five rows horizontally horizontally 0.45m above ground level and tying with new coir rope and removing the all materials after the counting is over. (16 days) |
| 22 | Hire charges for materials for the above item( for 16 days) |
| 23 | Hire charges for Ready made M.S Steel barricading of each unit size of 8' x 4' arrangements for BT Road surface area with proper supporting stand & base plate for a height of 1.20m above ground level and connecting with bolt and nuts and removing the all materials after the counting is over. (3 days) |
| 24 | Charges for supplying, fixing and removing of Weld mesh protection over the casurina barricading of weld mesh of size 2.5cm x 2.5cm and fixing properly by using binding wire etc ., complete complying with standard specification and as directed by departmental officers (16 days) |
| 25 | Hire charges for materials for the above item( for 16 days) |
| 26 | Charges for supplying,fixing and removing of Weld mesh protection for corridor openings by providing M.S weld mesh of size 7.50cm x 2.50cm and fixing properly by using country wood reepers of 50mm x 25mm for both horizontal and vertical supports etc ., complete complying with standard specification and as directed by departmental officers ( 16 days) |
| 27 | Hire charges for materials for the above item( for 16 days) |
| 28 | Charges for M.S Weld Mesh Cutting for making Counter openings for each counting tables & PVC Beedings are provided alround the openings for better fininshing and safety aspects etc., complete as directed by the departmental officers |
| 29 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 30 | Brick Masonry walls in Cement mortar: Below 3m Height |
| 31 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs (Kotta & Cuddapah Slab) |
| 32 | Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers. |
| 33 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 34 | Brick partition walls of 11.50cm thickness using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 35 | In Ground Floor |
| 36 | In First Floor |
| 37 | In Second Floor |
| 38 | Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm including curing etc.,complete complying with standard specification. (Cement Mortor 1:6). |
| 39 | In Ground Floor |
| 40 | In First Floor |
| 41 | In Second Floor |
| 42 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 43 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P-Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 44 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. |
| 45 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 46 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 47 | Painting Old wood work with One coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 48 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with One coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 49 | Providing Block board in two layers with first layer in cement mortar 1:5 (one cement and five M-Sand(CS Sand) )20mm thick and the second layer in Combination mortar 1:1:6(one cement one lime and six M-Sand(CS Sand)) 20mm thick and providing band all round the block board in c.m 1:5 (one cement and five M-Sand(CS Sand)) for 20mm thick and 50mm width including cost of one coat of block oxide paint of approved quality complying with standard specification. |
| 50 | Re-fixing the fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.20/ 30mm thick |
| 51 | Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.20/ 30mm thick |
| 52 | Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M-Sand(CS Sand)), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 53 | Relaying with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M-Sand(CS Sand)), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 54 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 55 | Charges for Supplying, Fabrication, fixing in position and removing of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with necessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be got approved by Executive Engineer before use |
| 56 | Hire charges for materials for the above item( for 16 days) |
| 57 | Charges for Supplying, Fabrication, fixing in position and removing of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. |
| 58 | Hire charges for materials for the above item( for 16 days) |
| 59 | Hire charges for Providing frisking points of height 6\\" feet including fixing of casurina poles movable barricading with cloth in front side etc.,complete as directed by the department officers |
| 60 | Hire for 3 Days(For Election Counting) |
| 61 | Hire Charges for floor mat (Red Colour Carpet) arrangements as directed by the departmental officers |
| 62 | Hire charges for 16 days |
| 63 | Hire charges for 3 Days |
| 64 | Hire Charges for Temporary External Lift machine with platform & Lifting Motor arrangements for lifting of VVPAT Machines & other Election miscellaneous materials to Strong & Sealing Rooms in First Floor & Second Floor .The Cost is inclusive of machine hire,erection charges,operators cost,loading & unloading labours,fuel charges,conveyance and necessary scaffolding & wooden platform arrangements etc., complete as directed by the departmental officers |
| 65 | Hire Charges for 3 Days |
| 66 | Hire charges for Plastic Moulded chairs including transporting labour for loading and unloading and recollecting the same after the function is over but excluding the labour charges for spreading the chairs etc complete |
| 67 | Armed plastic chairs (for 3 days) |
| 68 | Hire Charges for Stainless Steel table of size 1.20m x 0.60m including conveyance, loading & un-loading charges and recollecting the same after the counting is over but excluding the labour charges for spreading the tables etc., complete as directed by the departmental officers. |
| 69 | Hire Charges for 3 Days |
| 70 | Hire Charges for Stainless Steel table of size 1.20m x 0.60m including conveyance, loading & un-loading charges and recollecting the same after the counting is over but excluding the labour charges for spreading the tables etc., complete as directed by the departmental officers. |
| 71 | Hire Charges for 3 Days |
| 72 | Hire Charges for Three Seater Sofa including conveyance, loading & un-loading charges and recollecting the same after the counting is over etc., complete as directed by the departmental officers. |
| 73 | Hire Charges for 60 days |
| 74 | Hire Charges for Single Seater Sofa including conveyance, loading & un-loading charges and recollecting the same after the counting is over etc., complete as directed by the departmental officers. |
| 75 | Hire Charges for 16 days |
| 76 | Hire Charges for Teapoy including conveyance, loading & un-loading charges and recollecting the same after the counting is over etc., complete as directed by the departmental officers. |
| 77 | Hire Charges for 16 days |
| 78 | Hire Charges for Ornamental Stainless Steel barricading Set having 6Nos of 50mm dia pipes of 304L Grade of 900mm height and fitted with 300mm dia M.S Base plate with necessary locking hooks and SS Stands are connected with rope arrangements for counting halls with necessary accessories etc., complete |
| 79 | Hire Charges for 3 Days |
| 80 | Hire Charges for Postal Ballot Pigeonhole plywood box made of 18mm thick waterproof plywood which consists of 14 compartments each having size of 230mmx325mmx300mm.The cost is inclusiveof materials,labours,conveyance and other miscellaneous accessories etc., complete as directed by the departmental officers. (5 days) |
| 81 | Hire Charges for 3 Days |
| 82 | Charges for VVPAT Pegeonhole Transparent box made of 4mm thick Acrylic Sheet(white colour) of good quality and approved make which consists of 14 compartments each having size of 100mm x 150mm x 100mm.The cost is inclusive of materials,labours,conveyance and other miscellaneous accessories etc., complete as directed by the departmental officers. |
| 83 | Charges for Supplying and making of Ready-made Bank Cashier type cabin of size 1.80m x 1.80m and 2.40m height for VVPAT Slip Counting purposes and removing the same after the counting is over. The cabin sides are enclosed with 12mm thick both side laminated particle board wall with necessary supporting and fixing arrangements for a height of 0.75m from bottom and remaining top 1.35m height is provided with 25mm x 25mm Size Aluminium grill with 10mm thick for better visibilty.The aluminium door of size 0.90m x 2.10m is provided at one corner other cabin. The cabin side walls & Aluminium mesh grills are fixed with suitable supporting arrangements for both top & bottom by means of Aluminium Sections: Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for better stability. The cost is inclusive of materials, labours, conveyance and other miscellaneous accessories etc., complete as directed by the departmental officers. |
| 84 | Hire Charges for 16 days |
| 85 | Hire charges for Watching Tower of size: 2.60m x 1.80m x 6.60m arrangements using Casurina poles and G.I Sheet.The Cost is inclusive of materials,labours for erection of working platform with G.I Roofing sheet and suitable ladder arrangments and removing the same after the counting is over etc., complete as directed by the departmental officers |
| 86 | Hire Charges for 16 days |
| 87 | Hire Charges for providing Samiana Pandhal arrangements and removing the same after the counting process.etc., complete as directed by the departmental officers (3days) |
| 88 | Hire Charges for 3 Days |
| 89 | Providing and fixing of flex board arrangements .The Cost is inclusive of flex board with all-round runner/M.S tubes for fixity,labours,conveyance and other miscellaneous accessories etc., complete as instructed by the departmental officers |
| 90 | Providing and fixing of 3mm thick Foam Sheet Name board of required size and approved colour etc., complete as directed by the departmental officer incharge |
| 91 | Providing and fixing of 6mm thick Acrylic Name board of required size and approved colour for name board with reflecting (illumination) sticker arrangements.The letters either tamil or english shall be engraved in the acrylic board using laser cuttings.The rate shall be includes cost of acrylic board, cost of laser cuttings & finishings, cost of ss screws, teakwood plugs,labour charges for fixing,conveyance and other miscellaneous accessories etc., complete as instructed by the departmental officers incharge. |
| 92 | Hire charges for supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found and remove the same after the counting is over.,etc complete as per standard specification and as directed by the Departmental Officers. |
| 93 | Hire Charges for 16 days |
| 94 | Hire charges for Supply and fixing Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS:15683., complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition and remove the same after the counting is over etc., complete as per standard specification and as directed by the Departmental Officers |
| 95 | Hire Charges for 16 days |
| 96 | Hire Charges for White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) |
| 97 | Hire Charges for providing and fixing approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm ( without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete and removing the same after the counting is over |
| 98 | Hire charges for Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 99 | Hire Charges for brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 100 | Hire Charges for approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 101 | Hire Charges for providing and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 102 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 103 | 110mm dia PVC Pipe |
| 104 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 105 | PVC Elbow-110mm dia |
| 106 | PVC Tee -110mm dia |
| 107 | PVC Bend-110mm dia |
| 108 | PVC Elbow-75mm dia |
| 109 | PVC Tee -75mm dia |
| 110 | PVC Bend-75mm dia |
| 111 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 112 | 20mm dia Pipe |
| 113 | 25mm dia Pipe |
| 114 | 32mm dia Pipe |
| 115 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 116 | 32mm dia PVC Tee |
| 117 | 20mm dia PVC Tee |
| 118 | 20mm x 15mm PVC Reducer |
| 119 | 20mm dia Elbow |
| 120 | 32mm dia PVC Elbow |
| 121 | 32mm dia PVC Union |
| 122 | Hire Charges for JCB engaged for the purpose of debris cleaning ,dozing and levelling works in the College building campus for Election Counting Centre etc., complete as directed by the departmental officer incharge |
| 123 | Labours (Mazdoor-Gr.I)engaged to Shifting of Steel table, chairs, Almirah & other furniturs etc., from New Class Room building to the Auditorium building and re-arranging the same after the election counting is over etc., complete as directed by the departmental officers |
| 124 | Labour charges for fixing windows and ventilators along with frames in position etc., complete.(Removing and re-fixing the existing cup-board shutters after the election counting is over) |
| 125 | ADD GST 18% Please Enable Macros to View BoQ information |
