|
| 1 | 1.Earth work in bulk excavation for all kinds of soil by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge ,including setting out, construction of shoring/bracing, removal of stumps and other deleterious materials. |
| 2 | 2.Providing and laying of soling stone size on level (hand packed ) watering ramming complete below Foundation& rooms including carriage with cost and carriage complte. |
| 3 | 3. Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation& rooms-Mudmat including carriage and cost. |
| 4 | 4. Brick work with F.P.S bricks of class designation 75in super structure upto floor -v lavel in: Cement mortar 1:6 (1 Cement : 6 coarse sand) Inculding cost and carriage of all material & curing). |
| 5 | 5. Random Rubble masonry with hard stone in foundation and plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: 7.1.1 Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 6 | 6. 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 7 | 7.Providing and laying in position specified grades of reinforced cement concrete M-20 grade in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. a) : All work upto plinth level : |
| 8 | 8.Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels with cost and carriage . |
| 9 | 9.Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms |
| 10 | 10. Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including carriage,cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. (50mm thick with 20mm nominal size stone aggregate) |
| 11 | 11. Providing and fixing Vitrified floor tiles ( 600mmx600mm) (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colors and shades laid on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete |
| 12 | 10. Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.11.68.1 Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent. |
| 13 | 11. Providing and fixing 12 mm thick ply board in ceiling with necessary nails etc. complete including frame work of K.D wood (spacing of 2' c/c with 2\\" x 2\\" wooden framework including all fixtures /nails complete including making wooden platform for overhead tanks ,planks over 3\\"x5\\" wooden joists. |
| 14 | 13. Providing & fixing 4.0 mm thick Float glass panes (weighing not less than 10 kg/sqm) with all fixtures, all complete |
| 15 | 14.Providing and fixing of cornice of KD wood 50mm x 50 mm incld. Priming coat all complete |
| 16 | 14..Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc. |
| 17 | 15..P/F of stainless steel grade 304 incl cost of blusters , master bluster , vertical post of 2\\" dia cutting fixing in granite the same incl horizontal hand rails and bottom rails complete including punching and fixing the ballusters and kingposts in concrete , grinding of uneven surfaces ,welding including all fittings and fixtures and carriages inclusive. |
| 18 | 16. Providing and fixing 30 mm thick panelled or panelled and glazed shutters for doors, fixing with butt hinges of required size with necessary screws, with Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked for doors of required thicknesss including ISI marked aluminium fittings that is handles ,towerbolts ,aldrops etc of required shape and size all complete as per direction of Engineer-in-charge with cost and carriages complete with priming coat and painting imported wood |
| 19 | 16.Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer after sand papering over walls |
| 20 | 18. Providing and applying white cement based putty of 2 mm thickthickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 21 | 17. Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 22 | 18. Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture. On wood work |
| 23 | 19.. Providing and fixing Ceramic glazed floor tiles (anti-skid) 30cmx30cm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in color such as white, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
| 24 | 20. Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 25 | 21.Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) |
| 26 | 22.Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc |
| 27 | a) 15mm dia GI pipes. |
| 28 | b) 20mm dia GI pipes. |
| 29 | c) ball valve 15/20/25/30mm |
| 30 | d) socket 15/20/25/30mm |
| 31 | e) union 15/20/25/30mm |
| 32 | f) 15/20/25/30 dia tanky nipple |
| 33 | g) 15/20/25/30 dia elbow |
| 34 | h)long bend 30 mm nominal bore each |
| 35 | 23.Providing and fixing G.I. reducer of approved quality 15mm /20mm nominal bore |
| 36 | 24. Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 37 | 25. Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) ofstandard design and of approved make conforming to IS : 8931 |
| 38 | 26. Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 39 | 27. Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank(Sintex,Electroplast,Star,Lotus or equivalent having valid ISI license) |
| 40 | 28. Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \\"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china orissa pattern W.C. pan of size 580x440 mm. |
| 41 | 29. Providing and fixing wash basin White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 42 | 30. Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 43 | 31. providing and fixing 50 L gyser of approved brand like racold, jaquar, havells, inlcuding all fixtures complete job |
| 44 | 32.Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 45 | 33. Providing and fixing C.P Brass Towel rail with a pair of CP Brass brackets of size 600x 20mm of approved make and brand as per directions of site incharge |
| 46 | 34..Providing and fixing Polyvinyl Chloride (PVC) pipes of approved make and brand including all fixtures complete job as per direction of Engineer-in-charge.External work including trenching,refilling etc. |
| 47 | 100 mm dia |
| 48 | 75 mm dia |
| 49 | 35.Providing and fixing of following size of PVC(Prince make) fittings ISI marked. |
| 50 | a) 100mm/75mm dia plain bend |
| 51 | b) 100mm/75mm dia door bend |
| 52 | c) 100mm/75mmm dia Collar. |
| 53 | d) 100mm x 75mm dia reducer. |
| 54 | e) 100mm/75mm dia plain tee |
| 55 | f) 100mm/75mm dia door tee |
| 56 | g) 75mm dia floor Traps |
| 57 | h) 75mm dia vent cowls. |
| 58 | i) 100mm/75mm dia PVC(Prince Clips). |
| 59 | 38.Providing and fixing of SS grating for floor trap |
| 60 | 39.Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455 x 610 mm and 45 cm deep |
| 61 | 40.Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside lockingwith push and pull operation complete, including the cost of providing andfixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. topcover of required thickness for rolling shutters.10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover Please Enable Macros to View BoQ information |
